See docs in bosh-micro-cli.

The properties below need to be generated explicitly per deployment of UAA release and are required for proper start-up and functioning of UAA. These are standard artifacts which can be generated using openssl. Please refer the topic below on how to generate a self signed cert.

login.saml.serviceProviderCertificate:
description: "UAA SAML Service provider certificate. This is used for signing outgoing SAML Authentication Requests"

login.saml.serviceProviderKey:
description: "Private key for the service provider certificate."

uaa.jwt.policy.keys:
 description: "Map of key IDs and signing keys, each defined with a property `signingKey`"
    example:
      key-1:
        signingKey
 
 uaa.jwt.policy.active_key_id:
 description: "The ID of the JWT signing key to be used when signing tokens."
 example: "key-1" 

By default UAA is configured to use SSL with a self-signed certificate and will be started on port 8443.

Add the following properties to your manifest:

• uaa.sslCertificate: Specifies your SSL certificate

• uaa.sslPrivateKey: Specifies your private key. The key must be a passphrase-less key.

1. Generate your private key with any passphrase

openssl genrsa -aes256 -out server.key 1024

2. Remove passphrase from key

openssl rsa -in server.key -out server.key

3. Generate certificate signing request for CA

openssl req -x509 -sha256 -new -key server.key -out server.csr

4. Generate self-signed certificate with 365 days expiry-time

openssl x509 -sha256 -days 365 -in server.csr -signkey server.key -out selfsigned.crt

• The property uaa.port can't be set to 8989 because this port is used by BOSH to monitor the server.

1. Fork the repository and make a local clone

2. Create a feature branch from the development branch

   cd uaa-release
   git checkout develop
   git submodule update
   git checkout -b my_branch

3. Make changes on your branch

4. Deploy your version of uaa-release to test the changes

5. Push to your fork (git push origin my_branch) and submit a pull request selecting develop as the target branch

We have provided a sample manifest for a bosh-lite uaa-release deployment. Make sure you modify the director uuid in the manifest to match yours

   bosh target 192.168.50.4
   bosh login admin admin
   bosh upload stemcell https://bosh.io/d/stemcells/bosh-warden-boshlite-ubuntu-trusty-go_agent --skip-if-exists
   bosh deployment docs/bosh-lite-uaa-release.yml
   bosh deploy

After that you can get the IP address and add the hostname to your /etc/hosts file

You may want to setup an entry in your /etc/hosts

  10.244.0.118    uaa-minimal.bosh-lite.com

• The UAA team uses RubyMine, The Most Intelligent Ruby and Rails IDE