wrong starting- and finishing holds light up, but problem holds work fine about arduinomoonboardled HOT 2 CLOSED

Hi Martin,

Thanks. I'm really happy that the project got so much traction.

From what I understand, either the LEDs are installed incorrectly or the mapping is off. You could try to adjust the LED mapping. Have a look at config.h (https://github.com/FabianRig/ArduinoMoonBoardLED/blob/main/src/config.h), line 23. Just remove "0, " at the beginning and add ", 199" at the end.

Best regards,

Fabian

from arduinomoonboardled.

Hi Fabian,
thank you very much for your support!!
My programming skills are unfortunately pretty basic. So I cannot really understand your arrays in config.h, even with your comments. But actually I share your opinion that it must have to do something with my LEDs .I tried different methods for quite some time today. Your suggested method did not help, but edditing line217 into: strip.SetPixelColor((lednumber+1), green); and line 237 into: strip.SetPixelColor((lednumber+1), red); brought the success. What still is misterious to me is that now my starting holds light blue, problem holds red, and finishing holds green. But that doesn't really matter at all and I had a really good bouldering session today and learned a lot about programming.
Many thanks again!

Best regards

Martin

from arduinomoonboardled.