Comments (14)
Should the hardware solution for multi-user support be removed now that you have added a software solution? Namely, the readme updates from commit 3fd616a.
You're absolutely right. I changed the README.
from arduinomoonboardled.
Just wanted to drop by again and say thanks for this particular update! It works great, and my wife and I are enjoying it.
from arduinomoonboardled.
I've included a fork of the original BLE serial library in 07d139b. That should hopefully enable multi user support.
If further testing shows that everything is working correctly, I'll update the README accordingly.
from arduinomoonboardled.
Hi FabianRig, I'm using your code sussefully on my home moonboard. I don't understand where I can find the last code that implement the multi user support.
Thank you for the help!
from arduinomoonboardled.
There are no code changes in the project but in the dependencies. Have a look at https://github.com/FabianRig/ArduinoMoonBoardLED/blob/main/platformio.ini where you can see that one dependency has been replaced with a custom version (forked and patched by me).
Just make sure you have the most recent version of this repo (git pull or git clone to a new directory) and that's it.
from arduinomoonboardled.
Hi, I add the new lines in the HardwareBLESerial.cpp and I'm just trying to use two moonboard apps at the same time and it works properly, great job guys!
from arduinomoonboardled.
Good to hear that it's working for you. But that's not the intended way. You can simply clone this repo -- no manual adjustments needed!
from arduinomoonboardled.
I'm sorry about that, actually I don't know how to do so yesterday I prepared the edit manually.
As soon as I have some minutes I'll try to figure out how to do it and update directly in the visual studio project so to give you a feedback.
from arduinomoonboardled.
Should the hardware solution for multi-user support be removed now that you have added a software solution? Namely, the readme updates from commit 3fd616a.
from arduinomoonboardled.
I'm sorry about that, actually I don't know how to do so yesterday I prepared the edit manually. As soon as I have some minutes I'll try to figure out how to do it and update directly in the visual studio project so to give you a feedback.
No need to apologize. :-) It's just more work to manually change code when you can just git clone / git pull. If you want a simple solution: just download this repo again to another folder and build and flash the firmware again.
from arduinomoonboardled.
Thank you for your kind words! :-) I'm glad it's working for you!
from arduinomoonboardled.
I'm sorry about that, actually I don't know how to do so yesterday I prepared the edit manually. As soon as I have some minutes I'll try to figure out how to do it and update directly in the visual studio project so to give you a feedback.
No need to apologize. :-) It's just more work to manually change code when you can just git clone / git pull. If you want a simple solution: just download this repo again to another folder and build and flash the firmware again.
I did this and I confirm that it work good, great job.. Yesterday we climbed with 4 app simultaneously, amazing!
Just to know, there's a maximum connection limit?
from arduinomoonboardled.
Nice, that's good to know! To be honest: I assume that there is a limit, but I don't know what the limit is. There is a limit for concurrent connections in the underlying libraries. However, the BLE Serial is not really a "connection" in that sense, so I'm not sure whether that internal limit applies.
Four parallel connections is already impressive. :-D We'll have to round up as many devices as possible and try it out. ;-)
from arduinomoonboardled.
I understand, maybe I could try with 5 connection if one day we'll climb together, I'll let you know if this will happen. Anyway I suggest to disable the setting "Light problem on swipe" otherwise is a mess :D
I would like to suggest one update:
it could be possible in the future to set a lower brightness during the start cycling so as to avoid an excessive use of current and then turn the brightness high during the climb?
That's because the section of the wire used for the led is extremely low and while all the leds are on the current is really high.
Thanks again for your work!
from arduinomoonboardled.
Related Issues (20)
- Logiclevel shifter for LED Dataline? HOT 3
- Has anyone tried with the official led lights + Arduino combo? HOT 16
- New moonboard app doesn't light up green blue lights HOT 7
- How to download the ArduinoMoonBoardLED project HOT 6
- Trouble Flashing HOT 6
- wrong starting- and finishing holds light up, but problem holds work fine HOT 2
- How many leds? HOT 3
- Are multiple user connects at the same time supported? HOT 14
- Source for LEDs HOT 2
- Wiring diagram HOT 10
- Only the first light is lighting up HOT 2
- Compiling issue HOT 2
- Is the name changeable? HOT 2
- Powering LED HOT 5
- Power supply HOT 4
- Other System Boards HOT 3
- Circuit Diagram HOT 6
- Bluetooth issues HOT 14
- Fun... HOT 4
Recommend Projects
-
React
A declarative, efficient, and flexible JavaScript library for building user interfaces.
-
Vue.js
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
-
Typescript
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
-
TensorFlow
An Open Source Machine Learning Framework for Everyone
-
Django
The Web framework for perfectionists with deadlines.
-
Laravel
A PHP framework for web artisans
-
D3
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
-
Recommend Topics
-
javascript
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
-
web
Some thing interesting about web. New door for the world.
-
server
A server is a program made to process requests and deliver data to clients.
-
Machine learning
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
-
Visualization
Some thing interesting about visualization, use data art
-
Game
Some thing interesting about game, make everyone happy.
Recommend Org
-
Facebook
We are working to build community through open source technology. NB: members must have two-factor auth.
-
Microsoft
Open source projects and samples from Microsoft.
-
Google
Google ❤️ Open Source for everyone.
-
Alibaba
Alibaba Open Source for everyone
-
D3
Data-Driven Documents codes.
-
Tencent
China tencent open source team.
from arduinomoonboardled.