The Public Lab Pi Camera Kit includes an operating system which is built upon the efforts of many people.

The build scripts have been forked from the Hypriot project.

Automatic build: For the purposes of facilitating quick development of this image, we've setup automatic builds on git commits to master branch. Downlod the latest development build.

Pre-requisites: You'll need to have Docker installed.

make sd-card

This will create an image called hypriotos-rpi-dirty.img.zip.

You'll need the Hypriot flash tool

git clone https://github.com/hypriot/flash
cd flash
./flash ~/location_of/hypriotos-rpi-dirty.img.zip

Place the flashed microSD card into your Pi device, power it up and give it a minute or two to start the embedded access point "00-PiCamera", with password publiclab.

Once you are connected to this wifi network, the Pi has hostname pi with IP address 172.24.1.1 and can be reached with from the pi.local or pi.localdomain address (either avahi or dns).

By default a user called publiclab is created with same password.

Features:

• ssh service on port 22
• Lighthttp on port 80
• Flash tool can customize image at flash time

Desired in the short term:

• Camera is pre-enabled
• USB OTG is also enabled (with IP address 192.168.7.2)

Check planning issue 5 for other plans.

We've disabled for build performance:

• Docker tools