Turbograft extends Turbolinks, allowing you to perform partial page refreshes.
Graft
- (noun) a shoot or twig inserted into a slit on the trunk or stem of a living plant, from which it receives sap.
In botony, one can take parts of a tree and splice it onto another tree. The DOM is a tree. In this library, we're cutting off sub-trees of the DOM and splicing new ones on.
Turbolinks works by intercepting navigation requests and loading them via Ajax when possible, swapping the body tag of the document with the newly loaded copy. Turbograft builds on this to allow you to perform a partial page refresh on specified DOM nodes by adding a refresh key. This allows you reduce page load time, while the feeling of a native, single-page application.
Turbograft gives you the ability to maintain a single, canonical render path for views. Your ERB views are the single definition of what will be rendered, without the worry of conditionally fetching snippets of HTML from elsewhere. This approach leads to clear, simplified code.
Partial page refreshes mean that CSS and JavaScript are only reloaded when you need them to be. Turbograft improves on the native, single-page application feel for the user while keeping these benefits inherited from Turbolinks.
Turbograft was built with simplicity in mind. It intends to offer the smallest amount of overhead required on top of a traditional Rails stack to solve the problem of making a Rails app feel native to the browser.
- Replace
gem "turbolinks"
withgem "turbograft"
in your Gemfile - Replace
//= require turbolinks
with//= require turbograft
in app/assets/javascripts/application.js - Run
bundle install
Much of Turbograft’s functionality relies on attributes HTML elements. These attributes are currently namespaced to data-tg-*
(e.g. data-tg-refresh
).
Versions of Turbograft older than 0.2.0 did not use this namespacing. The old attribute names (e.g. refresh
) are deprecated.
<div id="content" data-tg-refresh="page">
...
</div>
<a href="#" id="partial-refresh-page" data-tg-refresh="page" onclick="event.preventDefault(); Page.refresh({url: '<%= page_path(@next_id) %>',onlyKeys: ['page']});">Refresh the page</a>
This performs a GET
request, but our client state is maintained. Using the data-tg-refresh
attribute, we tell TurboGraft to grab the new page, but only refresh elements where data-tg-refresh="page"
. This is the lowest-level way to use TurboGraft.
data-tg-refresh
attributes on your DOM nodes can be considered somewhat analoguous to how class
will apply styles to any nodes with that class. That is to say, many nodes can be decorated data-tg-refresh="foo"
and all matching nodes will be replaced with onlyKeys: ['foo']
. Each node with data-tg-refresh
must have its own unique ID (this is how nodes are matched during the replacement stage). At the moment, data-tg-refresh
does not support multiple keys (e.g., data-tg-refresh="foo bar"
) like the class
attribute does.
You can specify multiple refresh keys on a page, and you can tell TurboGraft to refresh on one or more refresh keys for a given action.
<button id='refresh-a-and-b' href="<%= page_path(@id) %>" onclick="event.preventDefault(); Page.refresh({url: '<%= page_path(@id) %>', onlyKeys: ['section-a', 'section-b']});">Refresh Section A and B</button>
You can also tell TurboGraft to refresh the page, but exclude certain elements from being refreshed.
<button id='refresh-a-and-b' href="<%= page_path(@id) %>" onclick="event.preventDefault(); Page.refresh({url: '<%= page_path(@id) %>', exceptKeys: ['section-a', 'section-b']});">Refresh everything but Section A and B</button>
The data-tg-refresh-never
attribute will cause a node only appear once in the body
of the document. This can be used to include and initialize a tracking pixel or script just once inside the body.
<div data-tg-refresh-never>
<%= link_to "Never refresh", page_path(@next_id), id: "next-page-refresh-never", "data-tg-refresh" => "page" %>
</div>
The data-tg-remote
option allows you to query methods on or submit forms to different endpoints, and gives partial page replacement on specified refresh keys depending on the response status.
It requires your <form>
, <a>
, or <button>
to be marked up with:
data-tg-remote
: (optionally valueless for<form>
, but requires an HTTP method for links) the HTTP method you wish to call on your endpointhref
: (if node is<a>
or<button>
) the URL of the endpoint you wish to hitdata-tg-refresh-on-success
: (optional) The refresh keys to be refreshed, using the body of the response. This is space-delimiteddata-tg-full-refresh-on-success-except
: (optional) Replaces body except for specififed refresh keys, using the body of the XHR which has succeededdata-tg-refresh-on-error
: (optional) The refresh keys to be refreshed, but using body of XHR which has failed. Only works with error 422. If the XHR returns and error and you do not supply a refresh-on-error, nothing is changeddata-tg-full-refresh-on-error-except
: (optional) Replaces body except for specified refresh keys, using the body of the XHR which has failed. Only works with error 422data-tg-remote-once
: (optional) The action will only be performed once. Removesdata-tg-remote-method
anddata-tg-remote-once
from element after consumptiondata-tg-full-refresh
: Rather than using the content of the XHR response for partial page replacement, a full page refresh is performed. Ifdata-tg-refresh-on-success
is defined, the page will be reloaded on these keys. Ifdata-tg-refresh-on-success
is not defined, a full page refresh is performed. Defaults to true if neither refresh-on-success nor refresh-on-error are provideddata-tg-remote-norefresh
: PreventsPage.refresh()
from being called, allowing methods to be executed without updating client state
Note that as data-tg-refresh-on-*
pertains to partial refreshes and data-tg-full-refresh-on-*-except
pertains to full refreshes, they are incompatible with each other and should not be combined.
Call a remote method:
<a href="#" data-tg-remote="post" data-tg-refresh-on-success="page section-a section-b">Remote-method</a>
The Rails way:
<%= link_to "Remote method", method_path, 'data-tg-refresh-on-success' => 'page section-a section-b', 'data-tg-full-refresh' => 'true', 'data-tg-remote' => 'post' %>
Post to a remote form:
<div id="results" data-tg-refresh="results">
Use the field below to submit some content, and get a result.
</div>
<form data-tg-remote="" action="/pages/submit" method="post" data-tg-refresh-on-success="results" data-tg-refresh-on-error="results">
<input name="form-input" type="text">
<button type="submit">Submit</button>
</form>
turbograft:remote:init
: Before XHR is sentturbograft:remote:start
: When XHR is sentturbograft:remote:always
: Always fires when XHR is completeturbograft:remote:success
: Always fires when XHR was successfulturbograft:remote:fail
: Always fires when XHR failedturbograft:remote:fail:unhandled
: Fires afterturbograft:remote:fail
, but when no partial replacement with refresh-on-error was performed (because nodata-tg-refresh-on-error
was supplied)
Each event also is sent with a copy of the XHR, as well as a reference to the element that initated the data-tg-remote-method
.
With the data-tg-static
attribute decorating a node, we can make sure that this node is not replaced during a fullpage refresh. Contrast this to partial page refreshes, where we normally specify the set of elements that need to change. With data-tg-static
, we can define a set of elements (by annotating them with this attribute) that must never change.
The internal state of any nodes marked with data-tg-static
will remain, even though the entire page has been swapped out. A partial page refresh with onlyKeys
targeting a node inside of the data-tg-static
node is also possible, persisting your static element but swapping the innards.
Though, if you were to refresh the page at a higher level -- e.g., refreshing an ancestor of the data-tg-static
, the static aspect is no longer obeyed and it is replaced!
Examples of where this may be useful include:
- running
<video>
or<audio>
element - a client-controlled static nav
For the lazy developer in all of us, we can use the attribute data-tg-refresh-always
when we want to be sure we've absolutely replaced a certain element, if it exists. An example of such a node you may want to apply this might be an unread notification count -- always being sure to update it if it exists in the response.
When serializing forms for tg-remote calls, turbograft will check to ensure inputs meet the following criteria:
- the input has a
name
attribute - the input does not have the
disabled
attribute
and
- the input does not have the
data-tg-remote-noserialize
attribute - no ancestor of the input has the
data-tg-remote-noserialize
attribute
The data-tg-remote-noserialize
is useful in scenarios where a whole section of the page should be editable, i.e. not disabled
, but should only conditionally be submitted to the server.
There is an example app that you can boot to play with TurboGraft. Open the console and network inspector and see it in action! This same app is also used in the TurboGraft browser testing suite.
./server
When turbograft replaces or removes a node it uses native DOM API to do so. If any objects use jQuery to listen to events on a node then these objects will leak when the node is replaced because jQuery will still have references to it. To clean these up you'll need to tell jQuery that they're removed. This can be done with something like:
document.addEventListener 'page:after-node-removed', (event) ->
$(event.data).remove()
- Fork it ( http://github.com/Shopify/turbograft/fork )
- Create your feature branch (
git checkout -b my-new-feature
) - Commit your changes (
git commit -am 'Add some feature'
) - Write some tests, and edit the example app
- Push to the branch (
git push origin my-new-feature
) - Create new Pull Request
./server
and visit http://localhost:3000/teaspoon to run the JS test suitebundle exec rake test
to run the browser test suite