This is a relatively simple utility to create a Debian APT package repository.

We needed to generate repositories with the following criteria:

• Easy to create from local files (like the RPM createrepo utility)

• Can handle multiple versions of the same package

• No large complexity, run once and be done with it

• Can be served over the web for apt (unlike dpkg-scanpackages)

We used to publish packages with reprepro, but that can only handle one version of each package, meaning the old packages are removed when a new one is made available. People (including ourselves) didn't like this because they couldn't easily downgrade if there were issues. We like to keep all published packages available.

Since then we moved to aptly, which can keep multiple package versions in the repository. But it has fairly complex publishing requirements involving a set of source packages, a database of packages, needing to create a "snapshot" and then publishing that snapshot (which copies all the packages, so double the disk space). Then removing packages from the repository (devel packages aren't kept for ever) means having to work out all the individual packages and republishing the snapshot. In short, it's pretty complex.

Both these utilities are good, just they don't quite fit our needs.

With apt-buildrepo, you create a top-level directory, copy packages into it, and run the utility. That's it. The directory can then be served over HTTP(S) and job done. Because the package directories are not fixed under any structure, they can e.g. be created by date, which means older packages can be removed simply be removing all directories older than a particular date and re-running the same apt-buildrepo command.

This is intended to be simple. There's no database, no configuration files and nothing but a single script to run. Most heavy lifting (e.g. calculating checksums) is done by running external commands. Only one repo component ("main") is currently supported, again to keep things simple.

The generated repository is based on https://wiki.debian.org/DebianRepository/Format

Several standard utilities are required:

• md5sum, sha1sum, sha256sum, sha512sum, for file checksums
• dpkg-deb to read package information
• gnupg, for file signing
• gzip and bzip2 for file compression

The script expects the filesystem to be partially ready before operation. It only creates the new repo files and does not remove old ones. No packages are copied in to place so these need to be added first (which is the whole point of this script anyway!)

Create the repo root level directory:

mkdir repository

Make a directory to store packages. This should be under the top level directory. It's normally called "pool", but could be called anything:

mkdir repository/pool

Make some other directories (if wanted) and copy in some packages:

mkdir respository/pool/release1
cp /location1/*.deb respository/pool/release1/

mkdir respository/pool/release2
cp /location2/*.deb respository/pool/release2/

Ensure you have the GPG secret keyring (secring.gpg) and a file containing the passphrase available, or otherwise ensure that the gpg agent is running and the keyring is already available in the GPG standard keyring. To build the repository with the signing files:

/usr/local/bin/apt-buildrepo \
    -O "My Organisation Name" \
    -L "An optional label" \
    -c "bullseye" \
    -s "testing" \
    -p "pool" \
    -r '[email protected]' \
    -P "/path/to/gpg_passphrase" \
    -k "/path/to/secring.gpg" \
    repository

-O and -L are optional, but be aware that if they are changed then clients may complain about the repository being updated.

-c (codename) and -s (suite) are mandatory. For non-official repositories it seems sensible to keep both as the codename.

-p is the package directory, relative to the top-level root repository directory. Packages can be directly in the root directory, but the Debian repository documentation recommends against it. If in doubt, just use 'pool'.

-r is the signing key name. If unset then the repository won't be signed.

-P and -k are the GPG passphrase file and secret keyring file respectively. Both are optional. If the passphrase is unset then it's assumed that gpg-agent is running (or no passphrase is needed). If -k is set then a temporary directory will be created, the keyring imported, and then it will be wiped afterwards. Yes, gnupg is crazy in that you can't sign without needeing to create a key directory first.

Finally, the directory of the repostitory must be given.

It's easy to change the packages that are available. Add some new packages:

mkdir respository/pool/release3
cp /location3/*.deb respository/pool/release3/

Remove some old packages:

rm -rf repository/pool/release1

Remove the dists directory from the repository (not strictly necessary as the script will generally just overwrite the same files anyway):

rm -rf repository/dists

and re-run the apt-buildrepo command above.

A Docker docker-compose.yml file is included which will build several containers to test that the repository is generated correctly:

• packages, which will generate a test GPG key and test package
• server, which generates a repository and serves it over HTTP
• client-*, which are a variety of Debian images to try and install the package

To use, run:

docker compose down
docker compose build
docker compose up

Once all the containers have completed successfully, press Ctrl-C to quit the running server. Alternatively, while it is still running, you can browse to http://localhost:8888 to view the generated repository.

Some things are definitely in scope for improvement, as long as they don't distract from the "keep it simple" decision. None of these should be hard, but just aren't currently needed for our own use.

• Config file: just to save needing to pass a lot of arguments when running.

• Add caching: a simple ".cache" file that keeps a record of all package checksums and contents to save recalculating every time the script is run.

• Enforce more checks on the packages, for example to ensure that no duplicates are included.

• Write to a temporary dists directory and when complete remove the old one and move the new one in place.

• Calculate checksums internally rather than calling out to sha1sum etc.

• Read Debian package information using a perl module or similar, rather than calling out to dpkg-deb.

Copyright (c) 2024 Network RADIUS.

This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, either version 3 of the License, or (at your option) any later version.

This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.

You should have received a copy of the GNU General Public License along with this program. If not, see https://www.gnu.org/licenses/.

The apt-buildrepo script was written by Matthew Newton