Customized Project Enclosure - Thingiverse

Tested with Adafruit Huzzah, Sparkfun Thing and WEMOS D1 Mini

An IoT Button using an ESP8266 WiFI microcontroller, a push button and github actions. POSTS to a GitHub Actions Workflow dispatch event endpoint which updates a comment on an issue specific to each button.

I originally built this project using the IFTTT maker channel sending text messages, then switched to updating a github issue once text messages were no longer free. Now that IFTTT itself is no longer free I wrote a third sketch using GitHub Actions. This makes for a simpler demo anyways as the only service involved is GitHub and everything is stored in code. You can see the ReadMe with instructions from the original IFTTT project here.

The github actions workflow YML file update-issue-comment.yml is also in this repository and you can see the button press comments on the issue i have created for my SparkFun Thing button.

You will need the following settings in the arduino sketch esp8266_iot_button_actions.ino

    // WiFi and GitHub Variables
    const char* ssid = "YOUR_SSID"; // SSID For the WiFi network you want to connect to
    const char* password = "YOUR_PSK"; // PSK For the WiFi network you want to connect to
    const char* github_user = "YOUR_GITHUB_USERNAME"; // GitHub User for running action
    const char* github_repo = "YOUR_GITHUB_REPO"; // GitHub Repo where action lives
    const char* github_token = "YOUR_GITHUB_TOKEN"; // GitHub Authorization Token
    const char* github_workflow_id = "YOUR_WORKFLOW_YML_FILE"; // Workflow YML file name
    const char* host = "api.github.com"; // Server from which data is to be fetched
    const int httpsPort = 443; // Default port for HTTPS 

You will also need to copy the YML from the action in this repository and create a new issue where the comments from the button will go. The issue number in the YML file should be updated to the number of the newly created issue.

I soldered male pins on my Huzzah, and added female headers to my Sparkfun Thing. The thing did not come with any headers and male headers were included with the Huzzah.

I was able to program both with my FTDI Friend, you will need to cut the default RTS jumper on the back of the FTDI Friend (used by the Huzzah) and connect the DTR jumper to program the thing. Once cut it has been pretty easy to switch back and forth by soldering the jumpers as needed.

The built in battery and charging circuit on the ESP8266 Thing really makes it easy to work with. By cutting the DTR trace on the bottom of the board and installing pins for a jumper I am able to program the thing with the jumper installed, and debug over serial with it removed.

• Adafruit Huzzah
• Arcade Button
• Standard RGB LCD
• 4 M3 20MM Hex Screws
• AAA Battery Pack
• Female Jumper wires

• Sparkfun Thing
• Panel Mount Push Button
• Standard Green LCD
• 4 M3 20MM Hex Screws
• 150 mAh LiPo Battery
• Male Jumper wires

Using this awesome Parametric and Customizable Project Enclosure I made customized enclosures that fit the parts I was using for my buttons.

Customized Project Enclosure - Thingiverse