Install TensorFlow on the NVIDIA Jetson TX1 or TX2 from the provided wheel files

Python .whl files for installing TensorFlow.

There are two directories in this repository, TX1 and TX2. First, install the matching pip for your Python installation. Then install the wheel file from the directory that matches your Jetson model, and version of Python:

$ sudo apt-get install -y python-pip python-dev

$ pip install tensorflow-wheel-file

$ sudo apt-get install -y python3-pip python3-dev

$ pip3 install tensorflow-wheel-file

There are wheel files for Python 2.7 and Python 3.5 The Jetson environment:

• L4T 28.1 (JetPack 3.1)
• CUDA 8.0
• cuDNN 6.0

TensorFlow

• Version 1.3.0
• Built with CUDA support

Full directions used for building the wheel files:

• NVIDIA Jetson TX1: https://github.com/jetsonhacks/installTensorFlowTX1
• NVIDIA Jetson TX2: https://github.com/jetsonhacks/installTensorFlowTX2

Note: The Jetson TX1 uses a GPU architecture to 5.3, the Jetson TX2 is 6.2. The builds reflect this.