golang / freetype Goto Github PK
View Code? Open in Web Editor NEWThe Freetype font rasterizer in the Go programming language.
License: Other
The Freetype font rasterizer in the Go programming language.
License: Other
I used the following code to rasterize a horizontal Line, but the output is empty! Is this my mistake or there's a bug in Rasterizer?
type painter struct {
}
func (p *painter) Paint(spans []raster.Span, done bool) {
for _, span := range spans {
fmt.Printf("span %d, %d, %d\n", span.Y, span.X0, span.X1)
}
}
func main() {
raster := raster.NewRasterizer(256, 256)
raster.UseNonZeroWinding = true
raster.Start(fixed.Point26_6{fixed.Int26_6(10 * 64), fixed.Int26_6(10 * 64)})
raster.Add1( fixed.Point26_6{fixed.Int26_6(50 * 64), fixed.Int26_6(10 * 64)})
var ptr painter
raster.Rasterize(&ptr);
}
how to configuration about emoticon support?
These are needed to figure out line height and the height for the background of
highlighted text. Font.Bounds().YMin and YMax don't work; they are too large.
Instead we need ascent and descent from the hhea table.
Original issue reported on code.google.com by [email protected]
on 16 Feb 2015 at 8:13
as title
Is there a way to set a text in vertical?
I'd really appreciate that...
Thanks
How would I go about handling fallback fonts? Say I want to "write" a string with both japanese and latin characters, but the font I loaded only contains loaded characters. Would it somehow be possible to merge two truetype.Font
s into one?
When I use this module to print text to an image file, everything seems to work correctly.
However, in a special case, I want to underline some characters, I tried to use the Combining / Non-spacing character \u0332
for that, but it just comes out as a separate character. There are quite some combining / non-spacing characters, check: http://www.fileformat.info/info/unicode/category/Mn/list.htm
(the text on the right should be underlined)
I tried to look into the code to pinpoint the issue, but the code is a little too advanced for me to understand it in a quick look but I'm pretty sure it's in func (g *GlyphBuf) Load(f *Font, scale fixed.Int26_6, i Index, h font.Hinting) error {
in truetype/glyph.go
, where it calculates the advanceWidth
. The font I'm using is DejaVu Sans Mono and DejaVu Sans Mono Bold.
Hi, we are using this library for g3n and it's working nicely.
We just started using font metrics (thanks for adding that ๐) to better position text and it simplified the math since the metrics already take into account the point size and DPI.
For all the fonts I tried, I noticed that Metrics.Height < Metrics.Ascent + Metrics.Descent
. Why is that the case? I know that the docs state that "Height is the recommended amount of vertical space between two lines of text" but shouldn't that be the same as the height of the font?
The only difference I see between how Height
is calculated and the other metrics is that it is not divided by fUnitsPerEm
.
Thanks in advance!
I have created a composite image using a background single-color png image and
a text overlay using freetype-go. However, as you can see from the attached
image file, some of the color below the image is coming out blurred. Can anyone
tell me what I am doing wrong? Below is the code I am using to create the image.
func getImage(c *context, imageText string) (*image.RGBA, error) {
colors := []string{"blue", "green", "orange", "red"}
flag.Parse()
//read the image file
reader, err := os.Open("poll_image_" + colors[rand.Intn(len(colors))] + ".png")
if err != nil {
return nil, err
}
src, _, err := image.Decode(reader)
if err != nil {
return nil, err
}
b := src.Bounds()
rgba := image.NewRGBA(image.Rect(0, 0, *imagewidth, *imageheight))
draw.Draw(rgba, rgba.Bounds(), src, b.Min, draw.Src)
// Read the font data.
fontBytes, err := ioutil.ReadFile(*fontfile)
if err != nil {
return nil, err
}
font, err := freetype.ParseFont(fontBytes)
if err != nil {
return nil, err
}
// Initialize the context.
fg := image.White
ftc := freetype.NewContext()
ftc.SetHinting(freetype.NoHinting)
ftc.SetDPI(*dpi)
ftc.SetFont(font)
ftc.SetClip(rgba.Bounds())
ftc.SetDst(rgba)
ftc.SetSrc(fg)
// Draw the text.
sz := *fontsize
pt := freetype.Pt(*imageleftmargin, *imagetopmargin+int(ftc.PointToFix32(sz)>>8))
ftc.SetFontSize(sz)
lines := getImageTextLines(imageText)
for _, line := range lines {
_, err = ftc.DrawString(line, pt)
if err != nil {
return nil, err
}
pt.Y += ftc.PointToFix32(sz * *linespacing)
}
return rgba, nil
}
Original issue reported on code.google.com by [email protected]
on 10 May 2015 at 5:34
Attachments:
package main
import (
"image"
"image/png"
"log"
"os"
"github.com/golang/freetype/raster"
"golang.org/x/image/math/fixed"
)
func main() {
const (
w = 400
h = 400
)
var p raster.Path
p.Start(fixed.P(150, 150))
p.Add1(fixed.P(200, 250))
p.Add1(fixed.P(300, 250))
r := raster.NewRasterizer(w, h)
r.UseNonZeroWinding = true
r.AddStroke(p, fixed.I(80), raster.RoundCapper, raster.RoundJoiner)
rgba := image.NewRGBA(image.Rect(0, 0, w, h))
painter := raster.NewRGBAPainter(rgba)
painter.SetColor(image.Black)
r.Rasterize(painter)
f, err := os.Create("out.png")
if err != nil {
log.Fatalf("cannot create file: %v", err)
}
defer f.Close()
if err := png.Encode(f, rgba); err != nil {
log.Fatalf("writing png: %v", err)
}
if err := f.Close(); err != nil {
log.Fatalf("closing file: %v", err)
}
}
When I tried to get font's name with truetype.Parse I can't get the font's name / family name in english. It shows up as ?????
instead of its english name.
Here is my go code:
ttfParsed, err := truetype.Parse(filePath) if(err != nil) { continue } fmt.Println(">> "+ttfParsed.Name(1)+" | -->"+fontName)
I tried ttfParsed.Name with value 1, 2, 3, 16, and 17 all showed up as '?????' - please refers to the image below.
Using fonts: Microsoft Jhenghei (https://www.fontsmarket.com/font-download/microsoft-jhenghei)
Environment: go version go1.9.4 windows/amd64 on Windows 10
How do I get the english name of non-english font?
Font centered in the image
For example:
pt := freetype.Pt(0,440 + int(f.PointToFixed(26)) >> 8)
That is, how to quickly and automatically give the X coordinate value so that the font is centered.
I try to put output some music symbol just like the example but fail
anyone can help?
aguai@Sherlock:example/freetype>>$ cat main.go =03-06 00:31=
// Copyright 2010 The Freetype-Go Authors. All rights reserved.
// Use of this source code is governed by your choice of either the
// FreeType License or the GNU General Public License version 2 (or
// any later version), both of which can be found in the LICENSE file.
// +build ignore
//
// This build tag means that "go install github.com/golang/freetype/..."
// doesn't install this example program. Use "go run main.go" to run it.
package main
import (
"bufio"
"flag"
"fmt"
"image"
"image/color"
"image/draw"
"image/png"
"io/ioutil"
"log"
"os"
"github.com/golang/freetype"
"golang.org/x/image/font"
)
var (
dpi = flag.Float64("dpi", 72, "screen resolution in Dots Per Inch")
fontfile = flag.String("fontfile", "./HanaMinA.ttf", "filename of the ttf font")
hinting = flag.String("hinting", "none", "none | full")
size = flag.Float64("size", 48, "font size in points")
spacing = flag.Float64("spacing", 1.5, "line spacing (e.g. 2 means double spaced)")
wonb = flag.Bool("whiteonblack", false, "white text on a black background")
)
var text = []string{
"ััััะธะน ัะตะบัั",
"๐๐๐๐ ๐ก๐ข๐ฃ๐ค๐ฅ ",
"ไบๅ
ฅๅไบๅ
ฅ",
"One, two! One, two! and through and through"
}
func main() {
flag.Parse()
// Read the font data.
fontBytes, err := ioutil.ReadFile(*fontfile)
if err != nil {
log.Println(err)
return
}
f, err := freetype.ParseFont(fontBytes)
if err != nil {
log.Println(err)
return
}
// Initialize the context.
fg, bg := image.Black, image.White
ruler := color.RGBA{0xdd, 0xdd, 0xdd, 0xff}
if *wonb {
fg, bg = image.White, image.Black
ruler = color.RGBA{0x22, 0x22, 0x22, 0xff}
}
rgba := image.NewRGBA(image.Rect(0, 0, 1600, 1000))
draw.Draw(rgba, rgba.Bounds(), bg, image.ZP, draw.Src)
c := freetype.NewContext()
c.SetDPI(*dpi)
c.SetFont(f)
c.SetFontSize(*size)
c.SetClip(rgba.Bounds())
c.SetDst(rgba)
c.SetSrc(fg)
switch *hinting {
default:
c.SetHinting(font.HintingNone)
case "full":
c.SetHinting(font.HintingFull)
}
// Draw the guidelines.
for i := 0; i < 200; i++ {
rgba.Set(10, 10+i, ruler)
rgba.Set(10+i, 10, ruler)
}
// Draw the text.
pt := freetype.Pt(10, 10+int(c.PointToFixed(*size)>>6))
for _, s := range text {
_, err = c.DrawString(s, pt)
if err != nil {
log.Println(err)
return
}
pt.Y += c.PointToFixed(*size * *spacing)
}
// Save that RGBA image to disk.
outFile, err := os.Create("out.png")
if err != nil {
log.Println(err)
os.Exit(1)
}
defer outFile.Close()
b := bufio.NewWriter(outFile)
err = png.Encode(b, rgba)
if err != nil {
log.Println(err)
os.Exit(1)
}
err = b.Flush()
if err != nil {
log.Println(err)
os.Exit(1)
}
fmt.Println("Wrote out.png OK.")
}
goinstall cannot find the image/draw package with the latest release of Go. It
appears the package is actually @ /go/src/pkg/exp/draw
Original issue reported on code.google.com by [email protected]
on 10 Jun 2011 at 11:08
I have no idea how to submit patches, so forgive me if this is an inappropriate
venue.
Attached is a patch fixing TTC parsing.
The constant 12 was hardcoded instead of using `offset`.
Tested on a TTC v2.0 file, I don't have a v1.0 file to test on but based on
what I understand of the file format I don't think there should be any issues
with that.
Original issue reported on code.google.com by [email protected]
on 10 Sep 2014 at 4:30
Attachments:
I believe this is related to #32 where eaburns pointed out a potential issue with the scale factor. I don't know a great deal about fonts, but presuming a zero line gap and that height == ascent+descent
, I'm seeing issues with Droid Sans
and Source Code Pro
fonts using font.Drawer
, no hinting, 72dpi, 240pt.
For example:
bin, err := ioutil.ReadFile("DroidSans.ttf")
if err != nil {
log.Fatal(err)
}
f, err := truetype.Parse(bin)
if err != nil {
log.Fatal(err)
}
fc := truetype.NewFace(f, &truetype.Options{
Size: 240,
DPI: 72,
Hinting: font.HintingNone,
})
fmt.Printf("metrics %+v\n", fc.Metrics())
// Output: metrics {Height:240:00 Ascent:222:50 Descent:56:39}
fmt.Printf("ascent+descent %v\n", fc.Metrics().Ascent+fc.Metrics().Descent)
// Output: ascent+descent 279:25
I'm packing glyphs in a texture and exporting the metrics for use in opengl. The above was causing my baseline calculation to be lower than expected. For now I've worked around this by scaling the ascent and descent by size/(ascent+descent)
which produced the semi-correct result I'd expect.
It seems that the truetype package cannot load the OpenSans font.
The font is compatible with other TTF viewers/editors.. so I wonder why I
receive this error (from freetype.ParseFont() function):
freetype: invalid TrueType format: bad kern table length
Download font at www.opensans.com, I used the OpenSans-Regular.ttf font, but it
seems all the OpenSans fonts do not parse properly.
Best regards,
Stephen
Original issue reported on code.google.com by [email protected]
on 26 May 2013 at 4:47
What steps will reproduce the problem?
1. Use a non-image.Uniform image in SetSrc.
2. Call freetype.DrawString
What is the expected output? What do you see instead?
I'd expect that the src passed to c.SetSrc gets composited with the destination
with the two images aligned.
Instead, for each glyph, a region (0, 0) to (w, h) gets used from src, where w,
h are the dimensions of the glyph, with the result that the actual colors taken
from src depending on the height of the rendered glyph and adjacent glyphs are
inconsistently colored.
What version of the product are you using? On what operating system?
Lion on mac, but I'm sure that's irrelevant.
Please provide any additional information below.
In: http://code.google.com/p/freetype-go/source/browse/freetype/freetype.go#212
I think image.ZP should be dr.Min, or possibly adjusted to align src.Min and
dst.Min.
The comment would need fixing too to specify the meaning of the SetSrc value.
Attached is a variant of one of the example files that exhibits the problem.
I've tried to make the colors as nasty as possible to make the problem visible.
I've also attached a png with the output.
Original issue reported on code.google.com by [email protected]
on 1 Aug 2012 at 7:56
Attachments:
I'm dumping the glyphs from HanaMinB.ttf
( available at
https://osdn.net/frs/redir.php?m=pumath&f=%2Fhanazono-font%2F64385%2Fhanazono-20160201.zip
), where most of the characters are > U+FFFF.
Enclosed please find the output of
ttfdump -t cmap HanaMinB.ttf
According to the ttfdump output, this ttf file contains 4 cmap
subtables, covering the 4 encodings defined in truetype.go:
unicodeEncoding = 0x00000003 // PID = 0 (Unicode), PSID = 3 (Unicode 2.0)
microsoftSymbolEncoding = 0x00030000 // PID = 3 (Microsoft), PSID = 0 (Symbol)
microsoftUCS2Encoding = 0x00030001 // PID = 3 (Microsoft), PSID = 1 (UCS-2)
microsoftUCS4Encoding = 0x0003000a // PID = 3 (Microsoft), PSID = 10 (UCS-4)
And the current code selects the first one (unicodeEncoding):
pidPsid := u32(table, offset)
// We prefer the Unicode cmap encoding. Failing to find that, we fall
// back onto the Microsoft cmap encoding.
if pidPsid == unicodeEncoding {
bestOffset, bestPID, ok = offset, pidPsid>>16, true
break
} else if pidPsid == microsoftSymbolEncoding ||
pidPsid == microsoftUCS2Encoding ||
pidPsid == microsoftUCS4Encoding {
bestOffset, bestPID, ok = offset, pidPsid>>16, true
// We don't break out of the for loop, so that Unicode can override Microsoft.
}
and none of the >U+FFFF characters are available.
Should we prefer microsoftUCS4Encoding to the
16-bit-only unicodeEncoding ?
When I tried to add firebase.google.com/go using dep
, following error occurred:
$ dep ensure -add firebase.google.com/go
The following errors occurred while deducing packages:
* "code.google.com/p/freetype-go/freetype/raster": unable to deduce repository and source type for "code.google.com/p/freetype-go/freetype/raster": unable to read metadata: go-import metadata not found
validateParams: could not deduce external imports' project roots
I'm not sure the issue relates to this repository, http://code.google.com/p/freetype-go/freetype/raster redirects to this repository.
$ dep version
dep:
version : v0.4.1
build date : 2018-01-27
git hash : 37d9ea0
go version : go1.9.3
go compiler : gc
platform : darwin/amd64
go get github.com/golang/freetype
package golang.org/x/image/math/fixed: unrecognized import path "golang.org/x/im
age/math/fixed"
package golang.org/x/image/font: unrecognized import path "golang.org/x/image/fo
nt"
cm@ubuntu:~/go/src/pkg/github.com/chsc/gogl$ sudo /home/cm/go/bin/go get
code.google.com/p/freetype-go/freetype
package code.google.com/p/freetype-go/freetype
imports fmt: unrecognized import path "fmt"
package code.google.com/p/freetype-go/freetype
imports image: unrecognized import path "image"
package code.google.com/p/freetype-go/freetype
imports image/color: unrecognized import path "image/color"
package code.google.com/p/freetype-go/freetype
imports image/draw: unrecognized import path "image/draw"
package code.google.com/p/freetype-go/freetype
imports math: unrecognized import path "math"
package code.google.com/p/freetype-go/freetype
imports runtime: unrecognized import path "runtime"
package code.google.com/p/freetype-go/freetype
imports strconv: unrecognized import path "strconv"
package code.google.com/p/freetype-go/freetype
imports errors: unrecognized import path "errors"
Original issue reported on code.google.com by [email protected]
on 14 Oct 2012 at 10:34
Freetype-go generates artifacts close to start and end path points,
output differs from Freetype-C.
Font is automatically converted from C to Q by FontForge, no problems detected.
Rearanged canonical start point to leftmost on the contour produces expected
output.
Original issue reported on code.google.com by [email protected]
on 20 Feb 2015 at 9:48
Attachments:
From a Go synced/built from "release" branch:
$ goinstall freetype-go.googlecode.com/hg/freetype
/bin/bash: === cd
/home/shutej/go/src/pkg/freetype-go.googlecode.com/hg/freetype/raster; bash
gomake -f- install
6g -o _go_.6 geom.go paint.go raster.go stroke.go
paint.go:65: cannot convert c (type image.AlphaColor) to type int
paint.go:66: cannot use uint8((v * 255 + (255 - v) * a) / 255) (type uint8) as
type image.AlphaColor in assignment
paint.go:105: cannot use color (type uint8) as type image.AlphaColor in
assignment
paint.go:150: cannot convert r.Image.Pix[i + 0] (type image.RGBAColor) to type
uint32
paint.go:151: cannot convert r.Image.Pix[i + 1] (type image.RGBAColor) to type
uint32
paint.go:152: cannot convert r.Image.Pix[i + 2] (type image.RGBAColor) to type
uint32
paint.go:153: cannot convert r.Image.Pix[i + 3] (type image.RGBAColor) to type
uint32
paint.go:155: cannot use uint8((dr * a + r.cr * ma) / m >> 8) (type uint8) as
type image.RGBAColor in assignment
paint.go:156: cannot use uint8((dg * a + r.cg * ma) / m >> 8) (type uint8) as
type image.RGBAColor in assignment
paint.go:157: cannot use uint8((db * a + r.cb * ma) / m >> 8) (type uint8) as
type image.RGBAColor in assignment
paint.go:157: too many errors
make: *** [_go_.6] Error 1
--- exit status 2
goinstall: installing: running bash: exit status 2
Original issue reported on code.google.com by [email protected]
on 14 Jul 2011 at 3:44
Stroking is unsupported on cubic bezier path segments:
// Add3 adds a cubic segment to the stroker.
func (k *stroker) Add3(b, c, d fixed.Point26_6) {
panic("freetype/raster: stroke unimplemented for cubic segments")
}
There could be 3 alternatives to fix this:
A- Linear flattening: divide the cubic segment into several linear segments before stroking - can be implemented through simple heuristics or through a more evolved subdivision (e.g., http://www.cis.usouthal.edu/~hain/general/Publications/Bezier/BezierFlattening.pdf)
B- Quadratic approx.: subdivide into quadratic segments and stroke them
C- Cubic shifting: subdivide into cubic segments until they are "flat" enough that a simple offset translation is sufficient to generate the stroke curves.
Going forward would require to:
(1) Identify through the litterature the best alternative in terms of rendering quality + execution speed
(2) Implement it
I don't have enough spare time for (1) (already reading 10+ machine learning papers per day!). But, regarding (2), I could implement a simple variant of A (simple subdivisions). B or C would be way too much for my spare time, unless a simple algorithm can be unearthed.
@.@
I am trying to set the text color based on the example provided here. https://github.com/golang/freetype/blob/master/example/freetype/main.go
I don't see any code that explicitly sets the color of the text, except this:
ruler := color.RGBA{0xdd, 0xdd, 0xdd, 0xff}
if *wonb {
fg, bg = image.White, image.Black
ruler = color.RGBA{0x22, 0x22, 0x22, 0xff}
}
//... and then later
// Draw the guidelines.
for i := 0; i < 200; i++ {
rgba.Set(10, 10+i, ruler)
rgba.Set(10+i, 10, ruler)
}
I tried this in my code, but it does not seem to change the color of the text. What is the proper way of doing so. Thanks.
How to get the width of the string, and then generate a different size image based on the string?
I'm trying to use raster.MonochromePainter
, but looks like either it's broken or I'm doing something totally wrong.
I'm using draw2dimg, but that actually doesn't matter, I don't think it's their bug since the only difference is raster.Painter implementation.
Here is an example with simple RGBAPainter
.
package main
import (
"github.com/llgcode/draw2d/draw2dimg"
"image"
"image/color"
"github.com/golang/freetype/raster"
)
type mPainter struct {
*raster.MonochromePainter
}
func (mp mPainter) SetColor(color color.Color) {
mp.MonochromePainter.Painter.(*raster.RGBAPainter).SetColor(color)
}
func main() {
im := image.NewRGBA(image.Rect(0, 0, 100, 100))
drawPoly := func(col color.RGBA, xys ...int) {
// painter := raster.NewRGBAPainter(im)
// painter.SetColor(col)
// mpainter := mPainter{raster.NewMonochromePainter(painter)}
gc := draw2dimg.NewGraphicContext(im)
// gc := draw2dimg.NewGraphicContextWithPainter(im, mpainter)
gc.SetFillColor(col)
gc.SetStrokeColor(col)
gc.SetLineWidth(0)
gc.MoveTo(float64(xys[0]), float64(xys[1]))
for i := 2; i < len(xys); i += 2 {
gc.LineTo(float64(xys[i]), float64(xys[i+1]))
}
gc.LineTo(float64(xys[0]), float64(xys[1]))
gc.Close()
gc.Fill()
}
drawPoly(color.RGBA{0, 200, 0, 150}, 10, 10, 60, 10, 60, 60, 10, 60)
drawPoly(color.RGBA{200, 0, 0, 150}, 20, 20, 70, 20, 70, 70, 20, 70)
draw2dimg.SaveToPngFile("test.png", im)
}
It outputs expected image.
And here is an example with MonochromePainter
which description is
// A MonochromePainter wraps another Painter, quantizing each Span's alpha to
// be either fully opaque or fully transparent.
package main
import (
"github.com/llgcode/draw2d/draw2dimg"
"image"
"image/color"
"github.com/golang/freetype/raster"
)
type mPainter struct {
*raster.MonochromePainter
}
func (mp mPainter) SetColor(color color.Color) {
mp.MonochromePainter.Painter.(*raster.RGBAPainter).SetColor(color)
}
func main() {
im := image.NewRGBA(image.Rect(0, 0, 100, 100))
drawPoly := func(col color.RGBA, xys ...int) {
painter := raster.NewRGBAPainter(im)
painter.SetColor(col)
mpainter := mPainter{raster.NewMonochromePainter(painter)}
// gc := draw2dimg.NewGraphicContext(im)
gc := draw2dimg.NewGraphicContextWithPainter(im, mpainter)
gc.SetFillColor(col)
gc.SetStrokeColor(col)
gc.SetLineWidth(0)
gc.MoveTo(float64(xys[0]), float64(xys[1]))
for i := 2; i < len(xys); i += 2 {
gc.LineTo(float64(xys[i]), float64(xys[i+1]))
}
gc.LineTo(float64(xys[0]), float64(xys[1]))
gc.Close()
gc.Fill()
}
drawPoly(color.RGBA{0, 200, 0, 150}, 10, 10, 60, 10, 60, 60, 10, 60)
drawPoly(color.RGBA{200, 0, 0, 150}, 20, 20, 70, 20, 70, 70, 20, 70)
draw2dimg.SaveToPngFile("test.png", im)
}
It outputs empty (white backgroung) image. And even if I change alpha of fill color to 255, nothing changes. Actually, with any color I get white image like all the things are transparent.
Can you please help me with this? I can try to debug if you tell me where to look.
in hint.go line 671:
curDist := dotProduct(f26dot6(p.X-ref.X), f26dot6(p.Y-ref.Y), h.gs.dv)
as per the specifications:
https://developer.apple.com/fonts/TrueType-Reference-Manual/RM05/Chap5.html#IP
I think the distance should be computed using the projection vector and not the
dual vector. (h.gs.pv instead of h.gs.dv)
correct line:
curDist := dotProduct(f26dot6(p.X-ref.X), f26dot6(p.Y-ref.Y), h.gs.pv)
The equivalent code in Freetype is:
distance = CUR_Func_project( CUR.zp1.cur + point,
CUR.zp0.cur + CUR.GS.rp0 );
Where CUR_Func_project use the projection vector:
return TT_DotFix14( (FT_UInt32)dx, (FT_UInt32)dy,
CUR.GS.projVector.x,
CUR.GS.projVector.y );
Original issue reported on code.google.com by [email protected]
on 4 Nov 2014 at 1:38
How can freetype
be used with RTL languages?
It renders the letters only in their capital form and draw them left to right.
Hello! I need to create cyrillic text in image but all I can get is squares. Here is my code
package main
import (
"github.com/jung-kurt/gofpdf"
"github.com/golang/freetype"
"image"
"fmt"
"os"
"bytes"
"image/jpeg"
"io/ioutil"
"image/draw"
)
func main() {
pwd, err := os.Getwd()
if err != nil {
fmt.Println(err)
os.Exit(1)
}
dataFont, err := ioutil.ReadFile(pwd + "/font/luxisr.ttf")
if err != nil {
fmt.Printf("%v",err)
}
f, err := freetype.ParseFont(dataFont)
if err != nil {
fmt.Printf("%v",err)
}
dst := image.NewRGBA(image.Rect(0, 0, 800, 600))
draw.Draw(dst, dst.Bounds(), image.White, image.ZP, draw.Src)
c := freetype.NewContext()
c.SetDst(dst)
c.SetClip(dst.Bounds())
c.SetSrc(image.Black)
c.SetFont(f)
c.DrawString("ััััะบะธะน ัะตะบัั", freetype.Pt(0, 16))
pdf := gofpdf.New("P", "mm", "A4", "")
pdf.AddPage()
buf := new(bytes.Buffer)
err = jpeg.Encode(buf, dst, nil)
if err != nil {
fmt.Printf("%v",err)
}
reader := bytes.NewReader(buf.Bytes())
textName := "text1"
pdf.RegisterImageReader(textName, "jpg", reader)
pdf.Image(textName, 15, 15, 0, 0, false, "jpg", 0, "")
pdf.OutputFileAndClose("test.pdf")
}
I can't seem to load fonts generated using https://github.com/koron/bdf2ttf for example.
the line 1346 - 1347 looks weird
1346 n := f26dot6(h.stack[top])
This may be pedantic, but "n" in this case is a counter used for the loop at
line 1350: "for ; n > 0; n--"
It is in no way a 26.6 fixed point value so why cast it to f26dot6 ?
------
line 1347 if top < 2*int(h.gs.loop) {
This may be a copy/paste error, I don't see how the gs.loop value has anything
to do with deltaP or deltaC.
I'm assuming you want:
line 1347 if top < 2*n {
Original issue reported on code.google.com by [email protected]
on 5 Nov 2014 at 8:45
I would like to be able to get at the font name(s) stored in the truetype in
the font file.
Original issue reported on code.google.com by [email protected]
on 29 May 2014 at 12:39
I am using the library in a project to render text on an image, the font is Noto Deva (https://www.google.com/get/noto/#sans-deva).
Hi, I'm currently packaging Go and several modules including this one. Is there
any reason to have that much AUTHORS / LICENSE / README files? I'd prefer to
have only those on the top-level.
Furthermore, the aes and twofish subdirs dont' have working Makefiles, so
they're currently ignore for package builds. Plans to fix?
Original issue reported on code.google.com by [email protected]
on 9 Nov 2010 at 8:40
It is currently not possible to get the bounding box of a specific glyph, and
thus one can't figure out all the metrics one might need. Please add something
like func (f *Font) Bounds(scale int32, i Index) Bounds.
Original issue reported on code.google.com by [email protected]
on 7 Feb 2015 at 1:38
I upgraded the package and now I am missing freetype.FullHinting
and freetype.NewContext().PointToFix32
. How to fix this?
The attached archive contains 42 unique crashers for the package. The test
inputs were passed through the following program:
http://play.golang.org/p/qxzq2QBtYx
The headers of crashes are provided below. Each one of them is unique, i.e.
crash with a unique panic message and/or at different stack. I physically can't
file separate issue for each individual crash. Some of the inputs are valid
TTFs files taken elsewhere.
panic: runtime error: invalid memory address or nil pointer dereference
panic: truetype: hinting: division by zero
panic: truetype: hinting: nested FDEF
panic: runtime error: index out of range
panic: runtime error: index out of range
panic: truetype: hinting: point out of range
panic: truetype: hinting: invalid data
panic: truetype: hinting: undefined function
panic: runtime error: index out of range
panic: truetype: hinting: unimplemented twilight point adjustment
panic: truetype: hinting: unbalanced FDEF
panic: truetype: hinting: call stack underflow
panic: runtime error: index out of range
panic: truetype: hinting: stack underflow
panic: runtime error: invalid memory address or nil pointer dereference
panic: truetype: hinting: insufficient data
panic: runtime error: index out of range
panic: truetype: hinting: unrecognized instruction
panic: freetype: unsupported TrueType feature: negative number of contours
panic: runtime error: index out of range
panic: truetype: hinting: stack overflow
panic: runtime error: index out of range
panic: truetype: hinting: unbalanced IF or ELSE
panic: runtime error: slice bounds out of range
panic: runtime error: index out of range
panic: freetype: unsupported TrueType feature: compound glyph transform vector
panic: runtime error: index out of range
panic: runtime error: slice bounds out of range
panic: truetype: hinting: too many instructions
panic: runtime error: invalid memory address or nil pointer dereference
panic: runtime error: integer divide by zero
panic: truetype: hinting: contour out of range
panic: truetype: hinting: unsupported IDEF instruction
panic: runtime error: integer divide by zero
panic: runtime error: integer divide by zero
panic: hinting: unimplemented SHC instruction
panic: runtime error: slice bounds out of range
panic: runtime error: integer divide by zero
panic: runtime error: index out of range
panic: runtime error: index out of range
panic: runtime error: index out of range
panic: runtime error: index out of range
Original issue reported on code.google.com by [email protected]
on 29 Apr 2015 at 10:25
Attachments:
I have an application where I'd like to render the tight pixel font (https://www.dafont.com/tight-pixel.font) on a small 128x64 LCD with a 1-bit color space. Attached is an image showing the font rendered with golang/freetype (the example program), and gimp. I'd like it to look more like the gimp rendering (with no anti-aliasing, etc). Is there any way to do this with golang/freetype?
I've also looked at https://github.com/pbnjay/pixfont and it works OK, but it has an issue with calculating string width of using variable width fonts, plus it is more work to use the font.
Appreciate any pointers.
(note, most browsers and image viewers smooth the below image, so it is best viewed in gimp if you want to see exactly what is going on at the pixel level)
When p.X is less than zero, the position of first letter of s is incorrect!
Original issue reported on code.google.com by [email protected]
on 30 Nov 2013 at 7:47
Attachments:
Right now these four functions try to slide by the given delta
value. If they cannot slide by that amount, they don't move and return false. Instead, they should try to slide as much as possible up to delta
. This has two benefits: 1) often if each frame slides a bit, it can amount to enough further up the recursion stack, 2) frames will be able to slide flush with the side of the window.
Hello,
this is kinda of a feature request, but also a request for clarification because maybe I just got things wrong.
I am trying to work on go-sdl2 so that SDL Surfaces implements go's image.Image
and image/draw.Image
interfaces. The idea is to be able to render directly on SDL surfaces. After making such changes and trying to use freetype raster's on that surfaces, I noticed that there are a certain number of painters, each of which is working with a specific image format.
Now, I find this confusing: isn't image/color.Model
there to perform color conversion from one model to another? So, my question boils down to: why isn't there a painter which can deal with a generic image/draw.Image
and use its color model to map the pixels produced by rasterizer to whatever color format the image is using? Is this feasible at all or did I get all wrong?
I thought that, given a certain color you wanted to draw on the image, one could just do img.Set(img.ColorModel().Convert(your_color))
. Is a painter like this possible to have?
Thanks!
With freetype-go, is there a way to compute the text extents (width and height)
of a string given a particular font and size *before* rendering the text?
I've looked around in the source code, and it *appears* that the right
information is there, but I can't quite seem to figure out how to do it.
As of right now, if I want an image that "snugly" fits some string, I do the
following:
Over estimate the extents by multiplying the pixel size of one em unit by the
length of the string. I get the width/height this way (assuming one line of
text).
I allocate an image with a rectangle of two points: (0, 0) and (width, height).
After rendering the text to the image using DrawText, I use the point returned
from DrawText to take a sub-image of the initial image. (I convert this point
to a (x, y) position by simply dividing the X and Y of the point by 256. It
seems to work OK, but I have no idea if this is correct.)
--------------
And one last question: would the extents include the entire bounding box of the
string? The (x,y) position returned by DrawText doesn't seem to cover the parts
of the text the dip below the text's base line. Like the tail in the 'y'. My
solution has just been to pad the 'y' with a few pixels, but I know this is not
optimal since it will break if the font size changes too much.
(My apologies if my terminology is off. I don't have much experience in font
rendering.)
I would happily submit a patch if I was nudged in the right direction :-)
Thanks!
Original issue reported on code.google.com by [email protected]
on 2 Jun 2012 at 10:44
I had a panic occur in production today, this could be related to some of the bugs found in #17. It appears to stem from
Line 331 in e2365df
The stack trace is attached below
I am not sure exactly what produced this bug, and normally the function that gets run doesn't produce this error. However, this could be an indication that there needs to be some checking before assuming that the offset is a valid index?
When stroking polyline with a path, lines are not joined very well
(see the Attached screenshot, line width is 20)
I think this is a bug.
below you can see a short extract of the code(gc mean graphic context) that
stroke a rectangle
func (gc *GC) StrokeRect(line [4]float) {
gc.path.Start(toPoint(line[0], line[1]))
gc.path.Add1(toPoint(line[2], line[1]))
gc.path.Add1(toPoint(line[2], line[3]))
gc.path.Add1(toPoint(line[0], line[3]))
gc.path.Add1(toPoint(line[0], line[1]))
raster.Stroke(gc.rasterizer, gc.path, raster.Fix32(gc.lineWidth*256), nil, nil)
b := gc.image.Bounds()
mask := image.NewAlpha(b.Dx(), b.Dy())
painter := raster.NewAlphaOverPainter(mask)
gc.rasterizer.Rasterize(painter)
strokeColor := image.NewColorImage(gc.strokeColor)
draw.DrawMask(gc.image, gc.image.Bounds(), strokeColor, image.ZP, mask, image.ZP, draw.Over)
gc.rasterizer.Clear()
gc.path.Clear()
}
func toPoint(x, y float) raster.Point {
return raster.Point{raster.Fix32(int(x * 256)), raster.Fix32(int(y * 256))}
}
Original issue reported on code.google.com by [email protected]
on 14 Nov 2010 at 8:36
Attachments:
Only face.Glyph results (glyph images) are cached.
This makes font.MeasureString calls more expensive than they ought to be.
See https://groups.google.com/forum/#!topic/golang-nuts/oqRV5P-HQIo for the original report.
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.