Back on 2012 as college student, I originally developed IFME for compressing FRAPS game recordings by using x264 for archiving, my friends showing that IFME simple and lightweight, from that IFME was born.

IFME Source Code under license GPL 2.0.
However you are not allowed to sell either Source Code or Binaries.

Artwork drawn by 53C and adeq are property of IFME Project and under license Attribution-NonCommercial 4.0 International

Support this project! Even a little penny make this project alive and up-to-date!

You can donate via my paypal. If you made a donation, don't forget to tell us at Facebook or Twitter, You will be honored and listed on Hall of Fame and About Program

For Windows 7, you need:

• Microsoft Visual C++ (ALL)
• Microsoft .NET Framework 4.8

For Ubuntu, Linux, you need:

• mono-complete (Mono Runtime)

IFME no longer support 32-bit since High Resolution (QHD, UHD), High BitDepth require very large RAM

• OS: 64-bit Windows 10 & Linux (Ubuntu, etc...)
• CPU: Intel Core i9 10th Gen or AMD Ryzen 7 3700X
• RAM: 8GB DDR4 (QHD and below)
• RAM: 16GB DDR4 (UHD and above)
• HDD: 70GB (UHD, HDR temp disk)

IFME was build and compiled under Zen 2 Architecture, likely run very poor on non-Ryzen system, I strongly advice you to compile own x265 aginst own processor for maximum performance

You can download it via SourceForge (Release) or GitHub (Build from Source)

You can get Hardware Acceleration plugin here! simply extract to plugin folder.

Using Hardware Acceleration/Fixed Encoder NEVER gives you better compression quality like x264 & x265 do, they are aimed for Live Streaming or Broadcasting or anything needing very fast encoding with decent quality.

Windows users simply execute ifme.exe, meanwhile Linux users simply execute ifme.sh via Terminal Emulator

IFME require Console or Terminal (tty), please run with it.

• Clone Json.NET
• Download Plugin

Make sure clone these in same folder with ifme, so it will look like:

GitHub
  `-|
    |
    |`- IFME
    |
     `- Newtonsoft.Json

Then you can open ifme.sln. Have fun!

mkdir ~/GitHub
cd ~/GitHub
git clone https://github.com/Anime4000/IFME
cd IFME
./configure
make

Simple as that, if show an error, try download and install then run again.

You can find here or change master to ifme7.7.

You can find here or change master to ifme6.

You can find here or change master to ifme5.

You can find here or change master to ifme4.