Update:
v1.2-20170302
Add xserver-xorg-input-evdev_1%3a2.10.3-1_armhf.deb to support Raspbian-2017-03-02

Update:
v1.1-20160815

a)Download Raspbian official mirror:
https://www.raspberrypi.org/downloads/
b)Use“SDFormatter.exe”to Format your TF Card
c)Use“Win32DiskImager.exe” Burning mirror to TF Card

git clone https://github.com/goodtft/LCD-show.git
chmod -R 755 LCD-show
cd LCD-show/

In case of 2.8" LCD
sudo ./LCD28-show

In case of 3.2" LCD
sudo ./LCD32-show

In case of 3.5" LCD
sudo ./LCD35-show

In case of 3.97" LCD
sudo ./LCD397-show

In case of 4.3" LCD
sudo ./LCD43-show

In case of 5" LCD
sudo ./LCD5-show

In case of 7inch(B)-800X480 RPI LCD
sudo ./LCD7B-show

In case of 7inch(C)-1024X600 RPI LCD
sudo ./LCD7C-show

If you need to switch back to the traditional HDMI display
sudo ./LCD-hdmi

Wait a few minutes,the system will restart automaticall , enjoy with your LCD.

if you are using the newest Raspbian version:2017-03-02
you need to additional excute this two command bellow after Step1,2,3 excuted,
if not so,the Resistive touch to reverse or cannot be calibrated.
This additional command bellow is just for Raspbian-2017-03-02:

cd LCD-show
sudo dpkg -i -B xserver-xorg-input-evdev_1%3a2.10.3-1_armhf.deb
sudo cp -rf /usr/share/X11/xorg.conf.d/10-evdev.conf /usr/share/X11/xorg.conf.d/45-evdev.conf
sudo reboot