gtjoseph / dueui Goto Github PK

First of all, thank you very much for the implementation of the DueUI project. I am using DueUI in conjunction with my Duet2 Wifi and a Raspberry Pi4 with 7" Waveshare touchscreen. So far everything works stable - except the heightmap. The heightmap is not displayed graphically, as the following picture shows:

The following error status is displayed:

Here is the constellation of the Duet2 Wifi board:

Board: Duet 2 WiFi (2WiFi)
Firmware: RepRapFirmware for Duet 2 WiFi/Ethernet 3.3 (2021-06-15)
Version von Duet WiFi Server: 1.26
Duet Web Control 3.4.0-b4 (have also tried it with V3.3 -> no luck).

heightmap.csv:

heightmap.csv

Thank you for any support that could help me! If you need more data, please get in touch!

wbr,
Karl

Hi, no issues.
I was try to test it instead DWC2 as klipper frontend, but I got many errors and no connection.
Dwc2-for-klipper uses DuetWebControl as is and translated it requests
Intresting because android app too...

Is it possible to make it work?

how can I hide or disable menus that are not needed during an active print. In basically, during an active print i only need the first menu (Print) to monitor and pause or cancel and resume the print.

I have already integrated some security queries (print active - yes/no) into macros, but this is only possible to a limited extent. I would like to eliminate the possibility that an action is triggered by accidentally touching the touchscreen while a print is running.

Thanks!
wbr,
Karl