guill4ume / addrwatch Goto Github PK
View Code? Open in Web Editor NEWThis project forked from fln/addrwatch
A tool similar to arpwatch for IPv4/IPv6 and ethernet address pairing monitoring.
License: GNU General Public License v3.0
This project forked from fln/addrwatch
A tool similar to arpwatch for IPv4/IPv6 and ethernet address pairing monitoring.
License: GNU General Public License v3.0
=========== addrwatch =========== This is a tool similar to arpwatch. It main purpose is to monitor network and log discovered ethernet/ip pairings. Main features of addrwatch: * IPv4 and IPv6 address monitoring * Monitoring multiple network interfaces with one daemon * Monitoring of VLAN tagged (802.1Q) packets. * Output to stdout, plain text file, syslog, sqlite3 db, MySQL db * IP address usage history preserving output/logging Addrwatch is extremely useful in networks with IPv6 autoconfiguration (RFC4862) enabled. It allows to track IPv6 addresses of hosts using IPv6 privacy extensions (RFC4941). The main difference between arpwatch and addrwatch is the format of output files. Arpwatch stores only current state of the network ethernet/ip pairings and allows to send email notification when a pairing change occurs. This is fine for small and rather static networks. In arpwatch case all the history of pairings is saved only in administrators mailbox. When arpwatch is used for monitoring dozen or more networks it becomes hard to keep track of the historic address usage information. Addrwatch do not keep persistent network pairings state but instead logs all the events that allow ethernet/ip pairing discovery. For IPv4 it is ARP requests, ARP replies and ARP ACD (Address Conflict Detection) packets. For IPv6 it uses ICMPv6 Neighbor Discovery and (DAD) Duplicate Address Detection packets (Neighbor Solicitations, Neighbor Advertisements). The output file produced by addrwatch is similar to arpwatch. Example of addrwatch output file:: 1329486484 eth0 0 00:aa:bb:cc:dd:ee fe80::2aa:bbff:fecc:ddee ND_NS 1329486485 eth0 0 00:aa:bb:cc:dd:ee 192.168.1.1 ARP_REQ 1329486485 eth0 0 00:aa:bb:ff:00:11 192.168.1.3 ARP_ACD 1329486486 eth0 7 00:11:11:11:11:11 fe80::211:11ff:fe11:1111 ND_NS 1329486487 eth0 7 00:22:22:22:22:22 fe80::222:22ff:fe22:2222 ND_DAD 1329486488 eth0 7 00:33:33:33:33:33 192.168.2.2 ARP_REQ For each pairing discovery event addrwatch produce timestamp, interface, vlan_tag (untagged packets are marked with 0 vlan_tag), ethernet address, IP address and packet type seperated by spaces. To prevent addrwatch from producing too many duplicate output data in active networks rate-imiting should be used. Read more in 'Ratelimit' section. Installation ============ To compile addrwatch you mus have following shared libraries: * libpcap * libevent * OPTIONAL libsqlite3 To compile addrwatch with sqlite3 support:: $ ./configure --enable-sqlite3 $ make $ make install To compile addrwatch without sqlite3 support:: $ ./configure $ make $ make install If you do not want to install addrwatch to the system, skip the 'make install' step. You can find compiled addrwatch binary in 'src' directory. This is the only file needed to run the program and the only file that would otherwise be installed to the system. Uninstallation ============== If you have used 'make install' to install addrwatch to a system you can remove with command:: $ make uninstall In the sources directory. If you have already deleted the addrwatch sources, you can manually remove addrwatch from the system with command:: $ rm /usr/local/bin/addrwatch $ rm /usr/local/share/man/man8/addrwatch.8 If you have specified --prefix argument to configure script substitute /usr/local with the prefix path used. Usage ===== To simply try out addrwatch start ir without any arguments:: $ addrwatch When started like this addrwatch opens first non loopback interface and start logging event to the console without writing anything to disk. All events are printed to stdout, debug, warning, and err messages are sent to syslog and printed to stderr. If you get error message: addrwatch: ERR: No suitable interfaces found! It usually means you started addrwatch as normal user and do not have sufficient privileges to start sniffing on network interface. You should start addrwatch as root:: $ sudo addrwatch You can specify which network interface or interfaces should be monitored by passing interface names as arguments. For example:: $ addrwatch eth0 tap0 To find out about more usage options:: $ addrwatch --help Ratelimiting ============ If used without ratelimiting addrwatch reports etherment/ip pairing everytime it gets usable ARP or IPv6 ND packet. In actively used networks it generates many duplicate pairings especially for routers and servers. Ratelimiting option '-r NUM' or '--ratelimit=NUM' surpress output of duplicate pairings for at least NUM seconds. In other words if addrwatch have discovered some pairing (mac,ip) it will not report (mac,ip) again unless NUM seconds have passed. There is one exception to this rule to track ethernet address changes. If addrwatch have discovered pairings: (mac1,ip),(mac2,ip),(mac1,ip) within ratelimit time window it will report all three pairings. By doing so ratelimiting will not loose any information about pairing changes. For example if we have a stream of events: ==== ================= =========== time ethernet ip ==== ================= =========== 0001 11:22:33:44:55:66 192.168.0.1 0015 11:22:33:44:55:66 192.168.0.1 0020 aa:bb:cc:dd:ee:ff 192.168.0.1 0025 aa:bb:cc:dd:ee:ff 192.168.0.1 0030 11:22:33:44:55:66 192.168.0.1 0035 11:22:33:44:55:66 192.168.0.1 0040 aa:bb:cc:dd:ee:ff 192.168.0.1 0065 aa:bb:cc:dd:ee:ff 192.168.0.1 ==== ================= =========== With --ratelimit=100 we would get: ==== ================= =========== 0001 11:22:33:44:55:66 192.168.0.1 0020 aa:bb:cc:dd:ee:ff 192.168.0.1 0030 11:22:33:44:55:66 192.168.0.1 0040 aa:bb:cc:dd:ee:ff 192.168.0.1 ==== ================= =========== Without such exception output would be: ==== ================= =========== 0001 11:22:33:44:55:66 192.168.0.1 0020 aa:bb:cc:dd:ee:ff 192.168.0.1 ==== ================= =========== And we would loose information that address 192.168.0.1 was used by ethernet address 11:22:33:44:55:66 between 30-40th seconds. To sum up ratelimiting reduces amount of duplicate information without loosing any ethernet address change events. Ratelimit option essentially limits data granularity for IP address usage duration information (when and for what time period specific IP address was used). On the other hand without ratelimiting at all you would not get very precise IP address usage duration information anyways because some hosts might use IP address without sending ARP or ND packets as often as others do. If NUM is set to 0, ratelimiting is disabled and all pairing discovery events are reported. If NUM is set to -1, ratelimiting is enabled with infinitely long time window therefore all duplicate pairings are suppressed indefinitely. In this mode addrwatch acts almost as arpwatch with the exception that ethernet address changes are still reported. It might look tempting to always use addrwatch with --ratelimit=-1 however by doing so you loose the information about when and for what period of time specific IP address was used. There will be no difference between temporary IPv6 addressed which was used once and statically configured permanent addresses. Event types =========== Ethernet/ip pairing discovery can be triggered by these types of events: * ARP_REQ - ARP Request packet. Sender hardware address (ARP header) and sender protocol address (ARP header) is saved. * ARP_REP - ARP Reply packet. Sender hardware address (ARP header) and sender protocol address (ARP header) is saved. * ARP_ACD - ARP Address collision detection packet. Sender hardware address (ARP header) and target protocol address (ARP header) is saved. * ND_NS - Neighbor Solicitation packet. Source link-layer address (NS option) and source address (IPv6 header) is saved. * ND_NA - Neighbor Advertisement packet. Target link-layer address (NA option) and source address (IPv6 header) is saved. * ND_DAD - Duplicate Address Detection packet. Source MAC (Ethernet header) and target address (NS header) is saved.
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.