Light

gumslone / tehybug Goto Github PK

View Code? Open in Web Editor NEW

25.0 8.0 7.0 35.7 MB

Low Power WIFI weather stations and environmental data loggers based on ESP8266/ESP8285 Module

Home Page: https://www.tindie.com/stores/gumslone/

PHP 1.44% Lua 25.53% C 13.66% C++ 41.82% Shell 0.41% Python 0.13% HTML 17.02%

esp8266 dht bmp280 bme280 ds18b20 dht21 veml6075 veml6070 ds18s20 am2320

tehybug's Introduction

TeHyBug

WIFI environmental data loggers

This repository contains code examples and code updates for TeHyBugs which you can order from Tindie

You may have a look at GumCP, a Raspberry Pi Web Control Panel, which now contains a TeHyBug data logging module

Get a TeHyBug scriptable iOS 14 widget from here https://gist.github.com/gumslone/542ceb3afc6a9977123608f6982c59ad

TeHyBug Universal 18650 / TeHyBug Mini / TeHyBug Classic firmware

Documentation for the TeHyBug Lua firmware you can get here: https://github.com/gumslone/tehybug/blob/master/TeHyBug.md and more at https://tehybug.com/faq

Tindie:

https://www.tindie.com/products/25268/ TeHyBug Universal 18650
https://www.tindie.com/products/16458/ TeHyBug Mini
https://www.tindie.com/products/11871/ MiniBug S5
https://www.tindie.com/products/21467/ TeHyButton Mini, WIFI Water Leakage Sensor
https://www.tindie.com/products/19651/
https://www.tindie.com/products/11872/

Enclosures for 3D Printing:

https://www.thingiverse.com/thing:5752129 TeHyBug Universal 18650
https://www.thingiverse.com/thing:6492350 MiniBug

TeHyBug FreshAirMakesSense CO2 Sensor

Documentation and the latest firmware binaries you can find here: https://github.com/gumslone/tehybug/tree/master/tehybug_co2_firmware

Tindie:

https://www.tindie.com/products/27887/ SCD4X Mini CO2, Temp, Humi, Pressure - WIFI Sensor
https://www.tindie.com/products/26085/ Senseair S8 CO2, Temp, Humi, Pressure - WIFI Sensor

Enclosures for 3D Printing:

https://www.thingiverse.com/thing:5494215 Mini SCD40 CO2 with Oled Display
https://www.thingiverse.com/thing:5505674 Senseair S8 CO2 with Oled Display
https://www.thingiverse.com/thing:5999218 Desk SCD40 CO2 with E-Ink Display

TeHyBug FreshAirMakesSense Desk CO2 Sensor

Documentation and the latest firmware binaries you can find here: https://github.com/gumslone/tehybug/tree/master/tehybug_co2_desk_firmware

Tindie:

https://www.tindie.com/products/30173/

Enclosures for 3D Printing:

https://www.thingiverse.com/thing:5999218 Desk SCD40 CO2 with E-Ink Display

TeHyBug Display / Clock

Latest firmware binaries and documentation you can find here: https://github.com/gumslone/tehybug/tree/master/tehybug_display_c_firmware_v1

Tindie:

https://www.tindie.com/products/25408/

Enclosures for 3D Printing: https://www.thingiverse.com/thing:5744609 TeHyBug Display / Clock

TeHyButton / WiFi Button / Open Door Sensor / Water Leakage Sensor

sends a http get/post or mqtt message through wifi network to a custom server with button state or any other custom message https://github.com/gumslone/tehybug/tree/master/tehybutton

GumBoard / TeHyBug Sensor Board

Latest firmware binaries and docummentation you can find here: https://github.com/gumslone/tehybug/tree/master/gumboard

Tindie:

https://www.tindie.com/products/25406/

tehybug's People

Contributors

Stargazers

Watchers

Forkers

kerstinmaur aplsms evangelinepetersen chrismayu dtrwos testrg0428 jvboyle

tehybug's Issues

Multiple HTTP requests to update

I want to use the tehybug with blynk, which provides a REST API (https://blynkapi.docs.apiary.io/#reference/0/write-pin-value-via-get/write-pin-value-via-get?console=1). Unfortunately it only allows to update a single virtual pin and a single value with each request.

Would it be possible to support multiple HTTP requests after each interval, e.g. specified as newline-separated URLs in the configuration interface?

Webpage of new C/C++ firmware won't load if TeHyBug website is down

I flashed the new TeHyBug C/C++ firmware to an ESP-01. It got a local IP (which I assume is from a previous configuration?). When going to the IP on port 80 the website stays on the following message:

Loading...
If the page doesnt load: make sure that you are connected to your local home network and then open this ip: 192.168.15.187 with your browser

It just so happened the TeHyBug website (https://tehybug.com) was down during this time. A screenshot of the network connections being attempted, as seen via the Web Developer console, is attached. Once the TeHyBug website was back, the page loaded fine.

This can be easily reproduced by adding the following to your local /etc/hosts file:
127.0.0.1 localhost tehybug.com

Then, try going to the local IP of the TeHyBug.

Unable to reset bug

Hi
I am unable to reset/enter configuration mode on my bug.
My bug is

TeHyBug_15575022
TeHyBug key: f4b5d168-7b1b-427e-a5b5-d9800c017f9e

I am clicking reset (black) and then red button. I have done this many times before but somehow it wont work anymore. I have tried red and then black button as well.
Is there any other way to reset?

AirQulity parameter reports the same value

I recently got a Mini WIFI Temp/Humi and Pressure, AirQ logger s6 ordered from Tindie which seems to be reporting the same constant value for AirQuality (it's always 0.177)

e.g.:
/?t=21.34&h=62.96&p=978.59&a=0.177

Is there something else I need to do in order to get it working?

Format of MQTT server

tehybug/tehybug_co2_firmware/README.md

Line 58 in 45a030c

 - <img src="https://github.com/gumslone/tehybug/blob/master/tehybug_co2_firmware/images/config.png?raw=true"> 

Does the MQTT server need to have a port specified?

e.g., will mqtt.home.com work, or would it need to be: mqtt.home.com:1883

Could you also specify some more details about what topics it will publish?
I'm having trouble getting it to talk to my mqtt server, but I'm not sure what to look for.

Electrical and board schematics are missing

subj

Adding TeHyBug relay to the TeHyBug website

I have successfully configured my TeHyBug relay to connect to my home wifi. And I can access TeHyBug relay consiguration page. But I am not able to find the TeHyBug Key needed to add the relay to the TeHyBug.com website.

UV Sensor For Next TeHyBug?

I love the TeHyBug and am wondering if it would be possible to include an UV sensor in the next TeHyBug generation?

License is missing

subj

Recommend Projects

React

A declarative, efficient, and flexible JavaScript library for building user interfaces.
Vue.js

🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
Typescript

TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
TensorFlow

An Open Source Machine Learning Framework for Everyone
Django

The Web framework for perfectionists with deadlines.
Laravel

A PHP framework for web artisans
D3

Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

javascript

JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
web

Some thing interesting about web. New door for the world.
server

A server is a program made to process requests and deliver data to clients.
Machine learning

Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Visualization

Some thing interesting about visualization, use data art
Game

Some thing interesting about game, make everyone happy.

Recommend Org

Facebook

We are working to build community through open source technology. NB: members must have two-factor auth.
Microsoft

Open source projects and samples from Microsoft.
Google

Google ❤️ Open Source for everyone.
Alibaba

Alibaba Open Source for everyone
D3

Data-Driven Documents codes.
Tencent

China tencent open source team.