中文简介

docker image to run a shadowsocks server

If you want to use a preset configration instead of a default, you can set the environment variable, eg

• server address: $SS_SERVER_ADDR default 0.0.0.0
• server port: $SS_SERVER_PORT default 8388
• password: $SS_PASSWORD default password
• encryption method: $SS_METHOD default aes-256-cfb others
• timeout: $SS_TIMEOUT default 300

To create the image guolin/shadowsocks, execute the following command on the guolin/shadowsocks folder:

    docker build -t guolin/shadowsocks .

Run the following command to start shadowsocks:

    docker run -d -p 8838:8838 guolin/shadowsocks

The first time that you run your container, a default password(password) will be set. You can get the password, check the logs of the container by running:

    docker logs <CONTAINER_ID>

You will see an output like the following:

    ========================================================================
    You can now connect to this ShadowSocks server:"

    server: 0.0.0.0  port: 8838 password: password

    Please remember the password!!
    ========================================================================

Done!

shadowsocks 主要是用于翻墙。 我的实际使用方法是直接在tutum上创建一个digitalocean的docker主机，然后运行这个image，通过ENV的方式进行基本的配置，然后就可以轻松翻墙了。

通过环境变量的方式实现

• server address: $SS_SERVER_ADDR 默认 0.0.0.0
• server port: $SS_SERVER_PORT 默认 8388
• password: $SS_PASSWORD 默认 password
• encryption method: $SS_METHOD 默认 aes-256-cfb others
• timeout: $SS_TIMEOUT 默认 300

一般情况只需要改密码就可以了。

1. 设置环境变量的密码。
2. 设置对外端口。

通过日志可以查看具体的配置情况。

docker run -d -p 8838:8838 -e SS_PASSWORD=[替换成自己的密码] guolin/shadowsocks