h-j-p / dac Goto Github PK

		Column token:
		---------------------------------------------------------------------------
		A   = Active
		I   = Init   (not changeable)
		R   = Reverse
		S   = Send not zero values (useful for rotary switches and pushbuttons)
		T   = Test
		LP  = Left padding
		dM  = dimming mode: 0 == off
		dT  = dimming time interval [sec.]
		dV  = dimming value
		Max = max value (range 0.0 - 1.0 only LED driver 3)
		
		For rotary switches, please check R and S for all positions.
		
		If you check one of these fields: 
		
		A  = Active
		R  = Reverse
		T  = Test
		
		Please select another field. Then the action behind the checkbox is 
		performed.
		

		Export.lua:
		---------------------------------------------------------------------------
		Package example: "File=A-10C:163=1.0:171=1.0:179=1.0:47=1.0:586=1.0:"
		The delimiter is ':'
		Switch/Load a new profile from data package ('File=A-10C:')
		The parameter 'A-10C' comes from selfData.Name. The file A-10C.xml will be 
		loaded.


		Log:
		---------------------------------------------------------------------------
		Modul == 00, Connector == 00 -> Port A  ... Arcaze USB
		Modul == 00, Connector == 01 -> Port B  ...    -"-
		Modul >= 01, Connector == 00 -> Port C  ... LED-Driver
		Modul >= 01, Connector == 01 -> Port D  ...    -"-
		Modul >= 01, Connector == 02 -> Port E  ...    -"-

		All values in HEX; Pin numbers in Dez;


		Tab 'Configuration'
		---------------------------------------------------------------------------
		Please, uncheck the checkbox 'log all actions', if you are ready with your 
		tests and configurations.
		

		Tab 'Display', 'LEDs', 'Switches' and 'Encoders'
		---------------------------------------------------------------------------
		Both checkboxes 'Active' and 'Init' must checked to get new values from a 
		record.
		

		Tab 'LEDs'
		---------------------------------------------------------------------------
		Dimming:

		dM = dimming mode: 0 == off
		dT = dimming time interval [sec.]
		dV = dimming value
                Trype = ID or Special. Normally it is always ID.
		Format = decimal or float4. Normally it is decimal. For dimming it is float4.
		
		For activation of automatic dimming: value > 0.5; dM != 0
		Real dimming is only possible with LED-Driver 3, but for other LEDs you get 
		a automatic blinking.
		
		One more thing: Please use only LED-Driver 2 or LED-Driver 3 on a Arcaze.
                    
		Tab 'Displays'
		---------------------------------------------------------------------------
		RadioDevice: Specifies the radio device to be queried. Under ID the Device ID 
		of the radio must be specified.
		Under Format the frequency format must be specified, e.g. MHz for megaherz.
		
		ListIndication: Specifies that values from displays are to be queried. 
		Under ID the Indication ID for the query must be specified. 
		Under Format the name of the return value must be specified.
		
		Special: If data about the ExportScript module specific extensions should be queried. 
		Under ID the corresponding ID from the extension file must be specified.

		Tab 'Masterdata'
		---------------------------------------------------------------------------
		Table 'Device IDs' and 'Device IDs and Button IDs';

		Please look at the files device.lua and clickabledata.lua of your DCS-Modul. 
		There are all infos you need:
		"... \Eagle Dynamics\DCS World\Mods\aircrafts\A-10C\Cockpit\Scripts\ ..."

		For more help look at:
                https://github.com/s-d-a/DCS-ExportScripts/wiki