Giter VIP home page Giter VIP logo

addon-lutron-cert's Introduction

Home Assistant Community Add-on: Lutron Certificate

GitHub Release Project Stage License

Supports aarch64 Architecture Supports amd64 Architecture Supports armhf Architecture Supports armv7 Architecture Supports i386 Architecture

Github Actions Project Maintenance GitHub Activity

Discord Community Forum

Buy me a coffee

A simple utility to generate signed certificate files to allow local control of a Lutron Caseta smart bridge.

Deprecation warning

This add-on is in a deprecated state!

This add-on used to be helpful when in need of getting the signed certificates of your Lutron Caseta smart bridge in order to use it with Home Assistant.

Nowadays, Home Assistant does support/help with this itself and this add-on is therefore no longer needed.

If you want to integrate Lutron Caseta with Home Assistant, than follow the instructions on the Home Assistant Lutron Caseta integration documentation page:

https://www.home-assistant.io/integrations/lutron_caseta/#configuration

About

This add-on will guide you through the necessary steps to create signed certificate files necessary to control your Lutron Caseta smart bridge with Home Assistant.

📚 Read the full add-on documentation

Support

Got questions?

You have several options to get them answered:

You could also open an issue here GitHub.

Contributing

This is an active open-source project. We are always open to people who want to use the code or contribute to it.

We have set up a separate document containing our contribution guidelines.

Thank you for being involved! 😍

Authors & contributors

The original setup of this repository is by Dale Higgs.

For a full list of all authors and contributors, check the contributor's page.

We have got some Home Assistant add-ons for you

Want some more functionality to your Home Assistant instance?

We have created multiple add-ons for Home Assistant. For a full list, check out our GitHub Repository.

License

MIT License

Copyright (c) 2018-2021 Dale Higgs

Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions:

The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

addon-lutron-cert's People

Contributors

dale3h avatar dependabot[bot] avatar frenck avatar renovate[bot] avatar

Stargazers

avatar avatar avatar avatar avatar avatar avatar avatar

Watchers

avatar avatar avatar

addon-lutron-cert's Issues

Lutron folder created under SSL folder but folder empty - Failed to import Caséta bridge configuration

Problem/Motivation

certificate add-on seems to work fine - logs are happy I believe but no certificates are being made. using Version
2020.12.7 on Rpi4 and latest lutron cert
Logs - 20-12-29 19:36:39 WARNING (MainThread) [supervisor.addons.validate] Unknown options lutron_caseta
20-12-29 19:36:42 INFO (SyncWorker_1) [supervisor.docker.interface] Stopping addon_a0d7b954_lutron-cert application
20-12-29 19:36:47 INFO (SyncWorker_1) [supervisor.docker.interface] Cleaning addon_a0d7b954_lutron-cert application
20-12-29 19:36:47 WARNING (MainThread) [supervisor.addons.validate] Unknown options lutron_caseta
20-12-29 19:36:48 INFO (SyncWorker_0) [supervisor.docker.addon] Starting Docker add-on hassioaddons/lutron-cert-armv7 with version 0.6.0
20-12-29 19:36:49 INFO (MainThread) [supervisor.api.security] /host/info access from a0d7b954_lutron-cert
20-12-29 19:37:15 INFO (SyncWorker_5) [supervisor.docker.interface] Restarting homeassistant/raspberrypi4-homeassistant

Expected behavior

put the certs into yaml and it will connect bridge locally - cannot do this with my missing cert info

Actual behavior

click web UI link within the lutron cert add-on - link cannot open and it displays the URL of my home assistant DNS setup with port :5817 at the end eg "http://blakeandevon.duckdns.org:5817/" - when i tried the first time the other day it would prompt from lutron login and then an error message came up and looked like a token or code was at the end of the error URL (when it did actually take me to a proper link) cannot reproduce what happened on my initial attempt to add the integration.

Steps to reproduce

Can provide screen shots
logs from Home Assistant above

Proposed changes

(If you have a proposed change, workaround or fix,
describe the rationale behind it)

Certificates not generating

Problem/Motivation

Only casetra.key generated.

Expected behavior

Other two certs not generated.

Actual behavior

Received the below
Internal Server Error
The server encountered an internal error and was unable to complete your request. Either the server is overloaded or there is an error in the application.

Steps to reproduce

(How can someone else make/see it happen)

Proposed changes

(If you have a proposed change, workaround or fix,
describe the rationale behind it)

Can not finish install

Problem/Motivation

Setup does not prompt user for login credentials

Expected behavior

-Click "OPEN WEB UI"
-pop up with "Click here to login to Lutron" for login credentials
-prompt for login
-provide credentials
-receive error
-copy URL
-edit config
-reset & done

Actual behavior

-Click "OPEN WEB UI"
-pop up with "Click here to login to Lutron" for login credentials

-receive error
-copy URL
-edit config
-Notification "Invalid config
The following integrations and platforms could not be set up:
lutron_caseta
Please check your config."
-reset, still disabled

Steps to reproduce

attempt install

Proposed changes

Bring back login. I've done this integration before, I'm just doing a fresh install of HA.

Error 500 when two homes on one account

Problem/Motivation

I have two homes and two Lutron hubs on the same network. The script works great but only on one of the hubs. When I specify the IP of the second hub I get error 500 "Internal server error" and do not get back the three certificate files.

Expected behavior

Start the script
Sign in using the Lutron account
Grab the "error" URL
Enter the IP of the first hub
Generate certificates
Stash certificates somewhere for safekeeping
Start over
Sign in using Lutron account (same account for 2nd home)
Grab the "Error" URL
Enter IP of the second hub
Generate certificates
Stash certificates somewhere for safekeeping
Move certificates and modify configuration.yaml as necessary

Actual behavior

Start the script
Sign in using the Lutron account
Grab the "error" URL
Enter the IP of the first hub
Generate certificates
Stash certificates somewhere for safekeeping
Start over
Sign in using Lutron account (same account for 2nd home)
Grab the "Error" URL
Enter IP of the second hub
ERROR CODE 500 - Internal Server Error

2 certificate files are generated, but not the caseta-bridge.crt

Steps to reproduce

(How can someone else make/see it happen)

Proposed changes

(If you have a proposed change, workaround or fix,
describe the rationale behind it)

I was able to get this working by using a separate Lutron account for each hub and installing the certificates. This is not an optimal solution as it gives up easy switching between homes in the Lutron app. I tried grabbing the certificates from each hub using the same Lutron account but the removing and adding the account to the hub seems to change the certificate, so this doesn't work.

Lutron devices quit showing in HA

#Lutron Caseta devices no longer available in HA

(Why the issue was filed)They have bee working flawlessly for a couple of years

Expected behavior

(What you expected to happen)

Actual behavior

(What actually happened) Updated to the latest version of HA 117.6

Steps to reproduce

(How can someone else make/see it happen)

Proposed changes

(If you have a proposed change, workaround or fix,
describe the rationale behind it)

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google ❤️ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.