hilscher / netiot-edge-passive-field Goto Github PK

For platform details read on here.

The image provided hereunder deploys a container which contains all necessary libraries to grant access to raw frame data of the passive fieldbus interface. Note, that using the passive fieldbus interface requires an appropriate license on the NIOT-E-TIJCX-GB edge gateway.

Base of this image builds a tagged version of ubuntu with enabled SSH.

The image SSH port 22 needs to be mapped to an unused gateway port, e.g. 22 to be available for remote access.

Only the privileged mode option lifts the enforced container limitations to allow usage of the passive fieldbus interface in a container.

Pulling the image from Docker Hub may take up to 5 minutes average.

STEP 1. Open the gateway's landing page under https://<gateways's ip address>.

STEP 2. Click the Docker tile to open the Portainer.io Docker management user interface.

STEP 3. Enter the following parameters under Containers > Add Container

• Image: hilschernetiotedge/netiot-edge-ubuntu-ssh-passive-fieldbus-raw

• Restart policy: always

• Port mapping: Host: 22 -> Container: 22

• Runtime > Privileged mode : On

• Runtime > Devices > add device Host path: /dev/netanalyzer_0 Container path: /dev/netanalyzer_0

STEP 4. Press the button Actions > Start container

The container starts the SSH service automatically. Login to it with an SSH client such as putty using the gateway's IP address along with the mapped SSH port. Use the credentials root as user and root as password when asked and you are logged in as root.

Access to passive filedbus raw frame data is enabled via the popular libpcap library. The required special libpcap version is already provided within the Docker image. See the libpcap project for details about the libpcap API.

As the passive fieldbus interface is available as a standard libpcap capture device, popular network analyzers such as tshark are able to use the capture interface directly. tshark and dumpcap are already provided within the given Docker image.

Login via SSH and start dumpcap -D to list all available capture devices. You should see following output:

1. eth0
2. any
3. lo (Loopback)
4. nflog
5. nfqueue
6. sit0
7. cifXANALYZER_0

Where cifXANALYZER_0 represents the passive fieldbus interface.

To start a capture type dumpcap -i cifXANALYZER_0 or tshark -i cifXANALYZER_0 respectively

The image is built from the GitHub project passive-fieldbus-raw. It complies with the Dockerfile method to build a Docker image automated.

Hilscher Gesellschaft fuer Systemautomation mbH www.hilscher.com