To get started install these softwares on your host machine:
-
Install Vagrant, it is a wrapper around virtualization softwares like VirtualBox, VMWare etc.: http://www.vagrantup.com/downloads
-
Install VirtualBox, this would be your VM provider: https://www.virtualbox.org/wiki/Downloads
-
Install Git, it is a distributed version control system: https://git-scm.com/downloads
-
Install X Server and SSH capable terminal
- Clone the course repository from Github:
$ git clone https://github.com/PrincetonUniversity/Coursera-SDN
- Change the directory to Coursera-SDN:
$ cd Coursera-SDN
- Now run the vagrant up command. This will read the Vagrantfile from the current directory and provision the VM accordingly:
$ vagrant up
If you want to tear down your vagrant session, you have multiple options to do so, each has its pros and cons. These options are as follows:
- vagrant suspend: With this option you will be able to save the state of the VM and stop it.
- vagrant halt: This will gracefully shutdown the guest operating system and power down the guest machine.
- vagrant destroy: If you want to remove all traces of the guest machine from your system, this is the command you should use. It will power down the machine and remove all guest hard disks
Go here for more information about vagrant teardown.
Note: By default it will instantiate a 64 bit VM. In case you want to run a 32 bit VM, you will need to change the config.vm.box_url
parameter in the Vagrantfile as shown below:
## 64 bit Vagrant Box
#config.vm.box_url = "https://d396qusza40orc.cloudfront.net/sdn1/srcs/Vagrant%20Box/coursera-sdn-2015_64bit.box"
## 32 bit Vagrant Box
config.vm.box_url = "https://d396qusza40orc.cloudfront.net/sdn1/srcs/Vagrant%20Box/coursera-sdn-2015_32bit.box"
- Now SSH into the VM:
$ vagrant ssh
- Programming assignments: You will find the programming assignments in the vm under the directory: /vagrant/assignments.
vagrant@coursera-sdn:~$ ls /vagrant/
assignments README.md setup Vagrantfile
- To perform a simple test to check if your VM setup is correct, run the command:
sudo mn
This will start a Mininet bash terminal. Type xterm h1 h2
in this terminal. If two external terminals pop out, then your setup worked as expected.
- Follow the instructions closely
- If you are running a 64bit OS, run a 64 bit VM
- If you are running a 32bit OS, run a 32 bit VM
- Disable Hyper-V on Windows
- Enable Virtualization support on the host (BIOS setup)
- The VM runs 192.168.0.0/24 as default network, if you use that network locally you need to change it (edit Vagrantfile: config.vm.network :private_network, ip: "192.168.0.100β)
- The host machine needs to run an X server (itβs native on Linux; OS X and Windowns require the installation of an X Server)
- Alternative methods to ssh to the VM: run "ssh -X [email protected]" password is vagrant
- If you see "ssh_exchange_identification: read: Connection reset by peer" when trying to connect using "vagrant ssh" use the alternative method provided above since it has been reported as a valid workaround, this issue is under investigation
- The shared folder: "Coursera-SDN" git cloned folder for the host and /vagrant for the guest
- Some students reported that on old/slower machines some assignments might fail because of extra delay on the computation wich translates to increaced delay on ping request/response. The original default vagrant configuration for VBox was 2Gb RAM and 1 CPU with 50% cap. We changed this to 1GB RAM and 1 CPU with no cap. We think this new configuration will be good for most, but if you want to you can always tweek this to your requirements or likings (edit the line that starts with "# CPU & RAM" on Vagrantfile)
- Following output is from MacOS
Coursera-SDN TestUser$ vagrant up
Bringing machine 'default' up with 'virtualbox' provider...
==> default: Clearing any previously set network interfaces...
==> default: Preparing network interfaces based on configuration...
default: Adapter 1: nat
default: Adapter 2: hostonly
==> default: Forwarding ports...
default: 6633 => 6635 (adapter 1)
default: 22 => 2222 (adapter 1)
==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
default: SSH address: 127.0.0.1:2222
default: SSH username: vagrant
default: SSH auth method: private key
default: Warning: Connection timeout. Retrying...
default: Warning: Connection timeout. Retrying...
default: Warning: Remote connection disconnect. Retrying...
==> default: Machine booted and ready!
==> default: Checking for guest additions in VM...
==> default: Setting hostname...
==> default: Configuring and enabling network interfaces...
==> default: Mounting shared folders...
default: /vagrant => /Users/TestUser/git/Coursera-SDN
TestUser-MBP:Coursera-SDN TestUser$ vagrant ssh
Welcome to Ubuntu 14.04.2 LTS (GNU/Linux 3.13.0-49-generic x86_64)
* Documentation: https://help.ubuntu.com/
System information disabled due to load higher than 1.0
Get cloud support with Ubuntu Advantage Cloud Guest:
http://www.ubuntu.com/business/services/cloud
Last login: Mon May 25 18:00:05 2015 from 10.0.2.2
vagrant@coursera-sdn:~$ ls /vagrant/
assignments README.md setup Vagrantfile
vagrant@coursera-sdn:~$ sudo mn
*** Creating network
*** Adding controller
*** Adding hosts:
h1 h2
*** Adding switches:
s1
*** Adding links:
(h1, s1) (h2, s1)
*** Configuring hosts
h1 h2
*** Starting controller
c0
*** Starting 1 switches
s1 ...
*** Starting CLI:
mininet> help
Documented commands (type help <topic>):
========================================
EOF gterm iperfudp nodes pingpair py switch
dpctl help link noecho pingpairfull quit time
dump intfs links pingall ports sh x
exit iperf net pingallfull px source xterm
You may also send a command to a node using:
<node> command {args}
For example:
mininet> h1 ifconfig
The interpreter automatically substitutes IP addresses
for node names when a node is the first arg, so commands
like
mininet> h2 ping h3
should work.
Some character-oriented interactive commands require
noecho:
mininet> noecho h2 vi foo.py
However, starting up an xterm/gterm is generally better:
mininet> xterm h2
mininet> h1 ifconfig
h1-eth0 Link encap:Ethernet HWaddr 12:1e:ad:14:fe:b3
inet addr:10.0.0.1 Bcast:10.255.255.255 Mask:255.0.0.0
inet6 addr: fe80::101e:adff:fe14:feb3/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:14 errors:0 dropped:0 overruns:0 frame:0
TX packets:8 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1128 (1.1 KB) TX bytes:648 (648.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
mininet>
mininet>
mininet> h1 ping h2
PING 10.0.0.2 (10.0.0.2) 56(84) bytes of data.
64 bytes from 10.0.0.2: icmp_seq=1 ttl=64 time=2.15 ms
64 bytes from 10.0.0.2: icmp_seq=2 ttl=64 time=0.331 ms
64 bytes from 10.0.0.2: icmp_seq=3 ttl=64 time=0.165 ms
64 bytes from 10.0.0.2: icmp_seq=4 ttl=64 time=0.073 ms
64 bytes from 10.0.0.2: icmp_seq=5 ttl=64 time=0.085 ms
64 bytes from 10.0.0.2: icmp_seq=6 ttl=64 time=0.035 ms
64 bytes from 10.0.0.2: icmp_seq=7 ttl=64 time=0.099 ms
64 bytes from 10.0.0.2: icmp_seq=8 ttl=64 time=0.088 ms
64 bytes from 10.0.0.2: icmp_seq=9 ttl=64 time=0.139 ms
64 bytes from 10.0.0.2: icmp_seq=10 ttl=64 time=0.089 ms
^C
--- 10.0.0.2 ping statistics ---
10 packets transmitted, 10 received, 0% packet loss, time 9016ms
rtt min/avg/max/mdev = 0.035/0.326/2.156/0.614 ms
mininet> pingall
*** Ping: testing ping reachability
h1 -> h2
h2 -> h1
*** Results: 0% dropped (2/2 received)
mininet> pingallfull
*** Ping: testing ping reachability
h1 -> h2
h2 -> h1
*** Results:
h1->h2: 1/1, rtt min/avg/max/mdev 0.850/0.850/0.850/0.000 ms
h2->h1: 1/1, rtt min/avg/max/mdev 0.114/0.114/0.114/0.000 ms
mininet> pingpairfull
h1 -> h2
h2 -> h1
*** Results:
h1->h2: 1/1, rtt min/avg/max/mdev 0.243/0.243/0.243/0.000 ms
h2->h1: 1/1, rtt min/avg/max/mdev 0.122/0.122/0.122/0.000 ms
mininet> time
*** Elapsed time: 0.000005 secs
mininet> nodes
available nodes are:
c0 h1 h2 s1
mininet> quit
*** Stopping 1 controllers
c0
*** Stopping 2 links
..
*** Stopping 1 switches
s1
*** Stopping 2 hosts
h1 h2
*** Done
completed in 324.923 seconds
vagrant@coursera-sdn:~$ exit
logout
Connection to 127.0.0.1 closed.