Arduino:

• Click "File" in the upper left corner -> Preferences -> Additional Development >Board Manager URL -> Enter the URL in the input box. (ESP32S3 is a new chip, and the SDK version needs to be version 2.0.3 or above) https://raw.githubusercontent.com/espressif/arduino-esp32/gh-pages/package_esp32_index.json
• Click OK and the software will be installed by itself. After installation, restart the Arduino IDE software.
• Search for ESP32 in Tools->Board Manager and install ESP32-Arduino SDK
• Copy all files in the lib folder to \Arduino\libraries
• Select the settings as shown. Note that the FLASH size partition and size may be modified depending on the board.

PlatfromIO:

• PlatformIO plug-in installation: Click on the extension on the left column -> search platformIO -> install the first plug-in
• Click Platforms -> Embedded -> search Espressif 32 in the input box -> select the corresponding firmware installation

ESP-IDF:

• The installation method is also inconsistent depending on the system, it is recommended to refer to the official manual for installation