This specific selfbot was designed to automatically catch Pokemon spawned on Discord by PokeTwo bot. It also offers other utility functions to automate features like trading, releasing, ID search, etc. Apart from autocatching, the bot extends its features to more advanced version with better control.

Current Version: v3.3.2 (13th June 2018)

Premium Version: v8.5.0 (19th August 2022) (Added support for Buttons and Poketwo mention as prefix)

The autocatcher is a Premium Version only feature, it will now work in this public version.

The Public Version is now intended for testing only. After the recent Poketwo updates, the selfbot commands might get flagged by poketwo and the account using it will most likely get reset. So use this only on your alts and to check how the bot is working. If you want a stealth mode which makes the selfbot commands un-flaggable, please switch to the Premium Version which has a mechanism to avoid this.

Pokeball now detects Gen 8 Pokemons as well!

The donations for Premium Version are open again.

Scroll down to Donations section for details. So if you want the autocatcher along with other amazing commands, DM me on Discord for the PayPal details after reading the donations section.

1. Automatically catch a Pokemon in whichever server you are in if the Poketwo bot spawns a Pokemon. [Premium Only]
2. Delay and catch rates to finesse the behaviour of the selfbot.
3. A log command to log all your Pokemon along with their numbers.
4. A trade command to bulk trade the Pokemon to your main account.
5. Priority List to control the Pokemon you catch and trade.
6. Toggle catching of duplicates.
7. Mass release of thrash Pokemon. (Limited)
8. Toggle autocatching to use in Command_Only mode.
9. Blacklist and Whitelist channels to control the scope of the selfbot. And a toggler function for the switch.
10. Toggle priority_only mode.
11. List out all the legendaries you've caught so far.
12. A gift command to send credits. (isolated to prevent conflict with Trade)
13. Blacklist/Whitelist toggle for entire guilds.
14. Toggle Autolog after catching new Pokemon.
15. Case-insensitive Commands. (Args are still sensitive.)
16. Auto-updates available.

• Python 3.7
• A server/local sytem to host it.
• A discord account. (Preferably two - one main and one alt)

1. First install Git for Windows and then run setup.bat to install the requirements.
2. Then, add your bot token in the config.json's "token" key. Refer the tutorial below to get the token.

   The token should be withing the "" like:

   "token": "Mxy.23e2d3_2er3.sf4t4.....xyz" Make sure it's exactly within one pair of "". Users deploying it on server, can uncomment the lines 3 and 17 and use the token as an environment variable.

3. Then simply run run.bat to get your bot live.

If you are on a mac, directly launch launcher.py instead of running the bat file. And use pip install -r requirements.txt instead to setup.

4. The autocatcher is off by default. To enable it, you need to send a message in Discord as P^autocatcher on.

P^ is the default command_prefix for the selfbot. Feel free to change it. Note that, this is not the same as Poketwo's prefix. If you don't want to toggle it on every time after restart, look for the line self.autocatcher = False under the __init__() function and change it to True instead of False.

5. Most of the commands need you to catch a Pokemon in the new guild with autocatcher on, at least once, followed by a restart.

There is a way to manually bypass this. You need to turn the Developer Mode on your Discord on, get the guild ID and alter guilds.json to include the ,guild_id:"poketwo prefix in that guild".

1. First install git by doing "sudo apt install git-all", cd to directory, and then run "setup.sh" with "./setup.sh". Make sure to give permission to "setup.sh" and "run.sh" by "chmod +x [file name here]".
2. Then follow step number "2" in the "Windows" section above.
3. Finally, run "run.sh" to get your self-bot online and running. Now you can configure stuff and enjoy.

• To find out how to get your token visit Token Tutorial.

• Keep the catch rate low and delay high for it to act normally.

• Priority Pokemon bypass catch rate. If a priority Pokemon is caught, it will be removed from priority list in the current session, manually remove it from config if you restart.

• Use the Safe List to prevent trading some Pokemon to your main account in case you want them on the selfbot's account.

• Catch Rate is a percentage out of 100.

• Delay is in seconds.

• delay_on_priority can be set to true or false, false means it won't wait and will instantly catch a Pokemon if it is in priority.

• restrict_duplicates can be set to false to catch unlimited number of duplicates. If true, use max_duplicates to control the number of duplicates you can catch.

• blacklists and whitelists can be filled with the channel IDs to choose where the selfbot should work. You can use the toggle_mode command to choose which mode it should run in.

• blacklist_guilds and whitelist_guilds can be filled with the guild IDs to filter entire guilds. You can use the toggle_guildmode command to choose which mode it should run in.

  Always keep the default value in the list. It is the ID for Official Poketwo Server.

• avoid can be filled with all the Pokemon that shouldn't be caught automatically.

• autolog can be used to choose whether the p!pokemon --name FreshlyCaughtPokemon should be used immediately after catching a new Pokemon. To be stealthy, use false.

• update_checker can be set to false if you don't wanna bother checking for new updates.

  Highly unrecommended.

• auto_update can be set to false to disable automatic update of code and other files.

  You will need to manually re-clone the repo and make modifications in your config again if disabled. Auto-updater makes sure that your previous configs stay intact and only makes additions.

• Use the pokelog command before performing a trade in order to sync up all your newly caught Pokemon.

• Regularly run pokelog to keep the list synchronized. Especially, before clean_trash as it might result in releasing the wrong Pokemon.

• For args based trading/releasing, always provide the IDs in a descending order.

• Preferably run this on an alt and then trade them to you main account.

• To get channel IDs, mention you channel in a message and add a \ before the mention. The integer part of it is the channel ID.

  For example: >> Sending \#pokechannel will give <#1234>. >>> In <#1234>, channel ID is 1234.

Example config:

{
  "token": "Mxy.23e2d3_2er3.sf4t4.....xyz",
  "command_prefix": "P^",
  "priority": ["Groudon", "Geodude"],
  "avoid": ["Croagunk", "Trubbish"],
  "catch_rate": 90,
  "delay": 2,
  "delay_on_priority": true,
  "restrict_duplicates": true,
  "max_duplicates": 2,
  "blacklists": [1234567,654356],
  "whitelists": [123456765,435467777],
  "blacklist_guilds": [382316968394620938],
  "whitelist_guilds": [],
  "autolog": true,
  "update_checker": true,
  "auto_update": true
}

• The creators of this bot are not responsible for any actions you perform using it. Use it at you own risk.
• Selfbots violate discord & PokeTwo TOS and you will get banned if caught using them. Be careful about how you use the bot.

  The selfbot is intended to give you a boost and get the edge over your friends, not hoard 40K pokemon lol.

• Do not use this in official PokeTwo Discord server.... for obvious reasons.

  Similarly do not use in public servers which explicitly prohibit this.

• The implications of ban might also affect other accounts which interact with this selfbot. Use with caution.

• The public version of this selfbot doesn't contain the following to keep the bot usage to minimum and not break Poketwo bot:

  • Auto-Catcher [Major]
  • Auto-Spammer [Major]
  • Mass seller [with IV lock and more options]
  • Logging catches to owner's DMs in multimode
  • Help command that displays usage instruction for other commands. [Major]
  • Trade command can use Pokemon names as args
  • DM commands - some commands can be used by DMing the bot.
  • Stealth from Poketwo
  • Full Disclosure of Source Code [Major]
  • Unlimited usage (no time trails) [Major]
  • Autobuy Rare Candies
  • Autofav pokemons with total IV above desired IV.
  • Autosleep
  • All commands are now compatible with PokeTwo
  • Maket Sniper - Be the fastest sniper of the poketwo market with customizable interval. [Major]
  • Market Flipper - quickly flip the prices of a pokemon in the market
  • Stocks - Track and Plot price fluctuations of a pokemon
  • Easy to customize configs editor
  • Autolock to prevent hitting captchas, with a wake up command.

  These features are based upon multimode which involves having multiple selfbot accounts.

  Check out the promo video:

  

• To avail these features, contact me via mail and I'll give you my PayPal ID.

• Please ping me only for donations and not for support (unless you are already a donor). Currently the price is just $25. Better donate fast as the price will be bound to go up along with the demand.*

  In your mail, use the keyword #Premium to let me know that you've read the Readme.

• The other advantages upon being a donor would be:

  • Be the first to avail any bug fixes and new updates.
  • A special mention of your username in this readme. (optional)
    • Bot related Support on Discord DMs. [on hold, use mail for now]

    • This version is to suggested to be used after you've tried out the public version.

    • The support doesn't include how to setup the public bot. Use GitHub Issues for that one.

  • You can propose new features and I shall implement them based on the plausibilty.

• Advanced Extension

  • The premium version also got an advanced extension which adds more game to the bot. It contains the following features:
    • This one works on a multi-user mode with 3+ bots. It follows a master-slave system where one master bot can trigger the commands on multiple slave selfbots.
    • Incubate command to automatically level up all the Pokemon in your fav list or list of IDs, through the autospammer module. You don't need to check for the level of your Pokemon and manually switch to the next one anymore.
    • chain command to chain a series of poketwo commands for a list of IDs.
    • sudo_exec and sudo_echo commands for the master-slave control.
  • The current price for this extension is just $10 and will change with demand, just like the premium version.

• Terms & Conditions apply:

  • You shall receive the source code and deployment instructions after the payment has been acknowledged.
  • You shall not disclose the obtained code to anyone directly. Refer them to this repo instead.

    The obtained code is not open-source and MIT License doesn't apply to it.

  • Support is subject to my availability.
  • Not all requested features are possible to implement.
  • Since Poketwo keeps updating, some of the older code might break. Stay patient until I send you a patch for it.
  • All donations are non-refundable.
  • Me or the contributors for this repo and not responsible for any legal suits.

• If you'd like to simply donate to support the cause instead of buying the Premium Version, you can always send me your support. Click that image below.

  

Don't forget to let me know that you're the one who paid it. ;)

• If you refer this to another person and they successfully purchase the Premium Version or above, you will get:
  • A 5% discount per referral while donating in the future.
• DM me on Discord with the name of the person you referred to and ask them to include your username too while contacting me about the donation.
• You need to also Star this repo before referring to others.
• Maximum number of stackable discounts would be 4, i.e. maximum possible discount would be 20%.
• The benefits are provided only after the referred person makes a donation.
• The discount rate is subject to change based on the referral activity and donation price.

Refer to the new CONTRIBUTION GUIDE. Also, refer to Issue Template and PR Template.

Best ways to contribute apart from Issues and PRs:

• Donations

  

• Starring the Repo

  

• Referrals

You can request new features using the Discussion page.

• Rapptz for Discord.py

• ThePythonDoge
• 4-mat
• ajmeese7
• KKonas