The program receives and decodes C1 telegrams (using the wireless mbus protocol) to acquire utility meter readings.

wmbusmeters version: 0.2
Usage: wmbusmeters [--verbose] [--robot] [usbdevice] { [meter_name] [meter_id] [meter_key] }* 

Add more meter triplets to listen to more meters.
Add --verbose for detailed debug information.
    --robot for json output.
    --meterfiles to create status files below tmp,
          named /tmp/meter_name, containing the latest reading.
    --oneshot wait for an update from each meter, then quit.

No meter triplets means listen for telegram traffic and print any id heard.

make
./build/wmbusmeters /dev/ttyUSB0 MyTapWater 12345678 00112233445566778899AABBCCDDEEFF

Example output: MyTapWater 12345678 6.375 m3 2017-08-31 09:09.08 3.040 m3 DRY(dry 22-31 days)

./build/wmbusmeters --verbose /dev/ttyUSB0 MyTapWater 12345678 00112233445566778899AABBCCDDEEFF

./build/wmbusmeters --robot /dev/ttyUSB0 MyTapWater 12345678 00112233445566778899AABBCCDDEEFF

Robot output: {"name":"MyTapWater","id":"12345678","total_m3":6.375,"target_m3":3.040,"current_status":"","time_dry":"22-31 days","time_reversed":"","time_leaking":"","time_bursting":"","timestamp":"2017-08-31T09:07:18Z"}

make HOST=arm

Binary generated: ./build_arm/wmbusmeters

make DEBUG=true

Binary generated: ./build_debug/wmbusmeters

make DEBUG=true HOST=arm

Binary generated: ./build_arm_debug/wmbusmeters

If the meter does not use encryption of its meter data, then enter an empty key on the command line. (you must enter "")

./build/wmbusmeters --robot --meterfiles /dev/ttyUSB0 MyTapWater 12345678 ""

Add yourself to the dialout group to get access to the newly plugged in im871A USB stick. Or even better, add this udev rule:

Create the file: /etc/udev/rules.d/99-usb-serial.rules with the content

SUBSYSTEM=="tty", ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="ea60", SYMLINK+="im871a",MODE="0660", GROUP="yourowngroup"

This will create a symlink named /dev/im871a to the particular USB port that the dongle got assigned.

Currently only supports the USB stick receiver im871A and the water meter Multical21. The source code is modular and it should be relatively straightforward to add more receivers and meters.

http://www.m-bus.com/files/w4b21021.pdf

https://www.infineon.com/dgdl/TDA5340_AN_WMBus_v1.0.pdf

http://fastforward.ag/downloads/docu/FAST_EnergyCam-Protocol-wirelessMBUS.pdf

http://www.multical.hu/WiredMBus-water.pdf

http://uu.diva-portal.org/smash/get/diva2:847898/FULLTEXT02.pdf

The AES source code is copied from:

https://github.com/kokke/tiny-AES128-C

The following two other github projects were of great help:

https://github.com/ffcrg/ecpiww

https://github.com/tobiasrask/wmbus-client

TODO: CRC checks are still missing. If the wrong AES key is supplied you probably get zero readings and sometimes warnings about wrong type of frames.