We are not affiliated with any Facebook group, any one claiming affiliation is doing so on their own and it's not part of the effort

The ONLY official source is this github and the ONLY official channel to reach us is listed below (mattermost).

Please join our Mattermost if you want to reach us.

There is a lot of different topics / channels on there, we welcome all with open arms.

you build this 3D printer project at your own risk

we are not responsible for any damages / injuries that might arise from the usage of all material, including but not limited to ideas, documentation, diagrams, that you get from this github. All precautions and safety protection should be taken and only attempt it if you are experienced in this area.

Recent rapid advancement of home brew reprap 3D printers pushed the capablity of the printers to the max. One of the limiting factor has always been build volume and the lack of a properly designed, modular and scaleable enclosure.

HariboCube is the next logical step towards an affordable fully enclosed printer that has over 350mm ^ 3 actual usable build volume and it's designed with ease of assembly and the optional enclosure walls baked in.

If you have any contributions you want to make to this project, please submit a PR (pull request) and we will review and merge into the project

The content of this project and all related documentation found in this repository is licensed under the Attribution-NonCommercial 4.0 International License

Share — copy and redistribute the material in any medium or format

Attribution — You must give appropriate credit, provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.

NonCommercial — You may not use the material for commercial purposes.