ij96 / honeywell_abp Goto Github PK

The lib currently only works with I2C. Do you mind implementing it for SPI?

Hi - thanks for writing this library! Do you plan to release it with a license (e.g. an open-source license) which, according to Github, would be needed to allow others to copy, distribute, or modify the code in this library?

Hello,

I'd love to use this library but I can't get it to work with
ABP2LANT060PG2A3XX

The OEM code they provide in the PDF is kinda poor.

Hi,
I bought Honeywell pressure sensor ABP2DRRN002ND2B3XX.

I used the library you created, but it did not output both pressure values and temperatures.
The situation is.
-I used example.ino and changed the pressure range to match the sensor I purchased.
(The output is inH2O, so I will convert it to Pa and use it in Pa.)
∙ Changed the input of the address in Honeywell_ABP.h, _p_min and _p_max, which are the pressure range. Also, the sensor used by //sensor 14-bit output range is 30-70% of 2^14, so I want to change the values of _output_min and _output_max.

I have made the above changes and the output is as shown in the attached image.

Please let me know if there is anything else I should change.
I will send you the code after rewriting if necessary.