High performance x86 (16/32/64-bit) instruction decoder, encoder and disassembler. It can be used for static analysis of x86/x64 binaries, to rewrite code (eg. remove garbage instructions), to relocate code or as a disassembler.
- Supports all Intel and AMD instructions
- The decoder doesn't allocate any memory and is 2x-5x+ faster than other similar libraries written in C or C#
- Small decoded instructions, only 32 bytes
- The formatter supports masm, nasm, gas (AT&T), Intel (XED) and there are many options to customize the output
- The encoder can be used to re-encode decoded instructions at any address
- The block encoder encodes a list of instructions and optimizes branches to short, near or 'long' (64-bit: 1 or more instructions)
- API to get instruction info, eg. read/written registers, memory and rflags bits; CPUID feature flag, flow control info, etc
- All instructions are tested (decode, encode, format, instruction info)
See below for some examples. All classes are in the Iced.Intel
namespace.
Decoder:
Decoder
Instruction
CodeReader
ByteArrayCodeReader
InstructionList
ConstantOffsets
IcedFeatures.Initialize()
Formatters:
Formatter
MasmFormatter
NasmFormatter
GasFormatter
IntelFormatter
FormatterOptions
MasmFormatterOptions
NasmFormatterOptions
GasFormatterOptions
IntelFormatterOptions
FormatterOutput
StringBuilderFormatterOutput
ISymbolResolver
IFormatterOptionsProvider
Encoder:
Encoder
BlockEncoder
CodeWriter
ConstantOffsets
OpCodeInfo
(Instruction.OpCode
andCode.ToOpCode()
)
Instruction info:
Instruction.GetInfo()
InstructionInfo
InstructionInfoFactory
InstructionInfoExtensions
MemorySizeExtensions
RegisterExtensions
For another example, see JitDasm.
using System;
using System.Collections.Generic;
using Iced.Intel;
namespace Iced.Examples {
static class Program {
const int HEXBYTES_COLUMN_BYTE_LENGTH = 10;
static void Main(string[] args) {
IcedFeatures.Initialize();
DecoderFormatterExample();
EncoderExample();
CreateInstructionsExample();
InstructionInfoExample();
}
const int exampleCodeBitness = 64;
const ulong exampleCodeRIP = 0x00007FFAC46ACDA4;
static readonly byte[] exampleCode = new byte[] {
0x48, 0x89, 0x5C, 0x24, 0x10, 0x48, 0x89, 0x74, 0x24, 0x18, 0x55, 0x57, 0x41, 0x56, 0x48, 0x8D,
0xAC, 0x24, 0x00, 0xFF, 0xFF, 0xFF, 0x48, 0x81, 0xEC, 0x00, 0x02, 0x00, 0x00, 0x48, 0x8B, 0x05,
0x18, 0x57, 0x0A, 0x00, 0x48, 0x33, 0xC4, 0x48, 0x89, 0x85, 0xF0, 0x00, 0x00, 0x00, 0x4C, 0x8B,
0x05, 0x2F, 0x24, 0x0A, 0x00, 0x48, 0x8D, 0x05, 0x78, 0x7C, 0x04, 0x00, 0x33, 0xFF
};
/*
* This method produces the following output:
00007FFAC46ACDA4 48895C2410 mov [rsp+10h],rbx
00007FFAC46ACDA9 4889742418 mov [rsp+18h],rsi
00007FFAC46ACDAE 55 push rbp
00007FFAC46ACDAF 57 push rdi
00007FFAC46ACDB0 4156 push r14
00007FFAC46ACDB2 488DAC2400FFFFFF lea rbp,[rsp-100h]
00007FFAC46ACDBA 4881EC00020000 sub rsp,200h
00007FFAC46ACDC1 488B0518570A00 mov rax,[rel 7FFA`C475`24E0h]
00007FFAC46ACDC8 4833C4 xor rax,rsp
00007FFAC46ACDCB 488985F0000000 mov [rbp+0F0h],rax
00007FFAC46ACDD2 4C8B052F240A00 mov r8,[rel 7FFA`C474`F208h]
00007FFAC46ACDD9 488D05787C0400 lea rax,[rel 7FFA`C46F`4A58h]
00007FFAC46ACDE0 33FF xor edi,edi
*/
static void DecoderFormatterExample() {
// You can also pass in a hex string, eg. "90 91 929394", or you can use your own CodeReader
// reading data from a file or memory etc
var codeBytes = exampleCode;
var codeReader = new ByteArrayCodeReader(codeBytes);
var decoder = Decoder.Create(exampleCodeBitness, codeReader);
decoder.IP = exampleCodeRIP;
ulong endRip = decoder.IP + (uint)codeBytes.Length;
// This list is faster than List<Instruction> since it uses refs to the Instructions
// instead of copying them (each Instruction is 32 bytes in size). It has a ref indexer,
// and a ref iterator. Add() uses 'in' (ref readonly).
var instructions = new InstructionList();
while (decoder.IP < endRip) {
// The method allocates an uninitialized element at the end of the list and
// returns a reference to it which is initialized by Decode().
decoder.Decode(out instructions.AllocUninitializedElement());
}
// Formatters: Masm*, Nasm*, Gas* (AT&T) and Intel* (XED)
var formatter = new NasmFormatter();
formatter.Options.DigitSeparator = "`";
formatter.Options.FirstOperandCharIndex = 10;
var output = new StringBuilderFormatterOutput();
// Use InstructionList's ref iterator (C# 7.3) to prevent copying 32 bytes every iteration
foreach (ref var instr in instructions) {
// Don't use instr.ToString(), it allocates more, uses masm syntax and default options
formatter.Format(instr, output);
Console.Write(instr.IP.ToString("X16"));
Console.Write(" ");
int instrLen = instr.ByteLength;
int byteBaseIndex = (int)(instr.IP - exampleCodeRIP);
for (int i = 0; i < instrLen; i++)
Console.Write(codeBytes[byteBaseIndex + i].ToString("X2"));
int missingBytes = HEXBYTES_COLUMN_BYTE_LENGTH - instrLen;
for (int i = 0; i < missingBytes; i++)
Console.Write(" ");
Console.Write(" ");
Console.WriteLine(output.ToStringAndReset());
}
}
/*
* This method produces the following output:
New code bytes:
0x48, 0x89, 0x5C, 0x24, 0x10, 0x48, 0x89, 0x74, 0x24, 0x18, 0x55, 0x57, 0x41, 0x56, 0x48, 0x8D
0xAC, 0x24, 0x00, 0xFF, 0xFF, 0xFF, 0x48, 0x81, 0xEC, 0x00, 0x02, 0x00, 0x00, 0x48, 0x8B, 0x05
0x18, 0x57, 0xEA, 0xFF, 0x48, 0x33, 0xC4, 0x48, 0x89, 0x85, 0xF0, 0x00, 0x00, 0x00, 0x4C, 0x8B
0x05, 0x2F, 0x24, 0xEA, 0xFF, 0x48, 0x8D, 0x05, 0x78, 0x7C, 0xE4, 0xFF, 0x33, 0xFF
Disassembled code:
00007FFAC48ACDA4 mov [rsp+10h],rbx
00007FFAC48ACDA9 mov [rsp+18h],rsi
00007FFAC48ACDAE push rbp
00007FFAC48ACDAF push rdi
00007FFAC48ACDB0 push r14
00007FFAC48ACDB2 lea rbp,[rsp-100h]
00007FFAC48ACDBA sub rsp,200h
00007FFAC48ACDC1 mov rax,[rel 7FFA`C475`24E0h]
00007FFAC48ACDC8 xor rax,rsp
00007FFAC48ACDCB mov [rbp+0F0h],rax
00007FFAC48ACDD2 mov r8,[rel 7FFA`C474`F208h]
00007FFAC48ACDD9 lea rax,[rel 7FFA`C46F`4A58h]
00007FFAC48ACDE0 xor edi,edi
*/
static void EncoderExample() {
var codeReader = new ByteArrayCodeReader(exampleCode);
var decoder = Decoder.Create(exampleCodeBitness, codeReader);
decoder.IP = exampleCodeRIP;
ulong endRip = decoder.IP + (uint)exampleCode.Length;
var instructions = new InstructionList();
while (decoder.IP < endRip)
decoder.Decode(out instructions.AllocUninitializedElement());
// Relocate the code to some new location. It can fix short/near branches and
// convert them to short/near/long forms if needed. This also works even if it's a
// jrcxz/loop/loopcc instruction which only has a short form.
//
// It can currently only fix RIP relative operands if the new location is within 2GB
// of the target data location.
//
// There's also a simpler Encoder class which is used by BlockEncoder, but it can only
// encode one instruction at a time and doesn't fix branches.
//
// Note that a block is not the same thing as a basic block. A block can contain any
// number of instructions, including any number of branch instructions. One block
// should be enough unless you must relocate different blocks to different locations.
var codeWriter = new CodeWriterImpl();
ulong relocatedBaseAddress = exampleCodeRIP + 0x200000;
var block = new InstructionBlock(codeWriter, instructions, relocatedBaseAddress);
// This method can also encode more than one block but that's rarely needed, see above comment.
bool success = BlockEncoder.TryEncode(decoder.Bitness, block, out var errorMessage);
if (!success) {
Console.WriteLine($"ERROR: {errorMessage}");
return;
}
var newCode = codeWriter.ToArray();
Console.WriteLine("New code bytes:");
for (int i = 0; i < newCode.Length;) {
for (int j = 0; j < 16 && i < newCode.Length; i++, j++) {
if (j != 0)
Console.Write(", ");
Console.Write("0x");
Console.Write(newCode[i].ToString("X2"));
}
Console.WriteLine();
}
// Disassemble the new relocated code. It's identical to the original code except that
// the RIP relative instructions have been updated.
Console.WriteLine("Disassembled code:");
var formatter = new NasmFormatter();
formatter.Options.DigitSeparator = "`";
formatter.Options.FirstOperandCharIndex = 10;
var output = new StringBuilderFormatterOutput();
var newDecoder = Decoder.Create(decoder.Bitness, new ByteArrayCodeReader(newCode));
newDecoder.IP = block.RIP;
endRip = newDecoder.IP + (uint)newCode.Length;
while (newDecoder.IP < endRip) {
newDecoder.Decode(out var instr);
formatter.Format(instr, output);
Console.WriteLine($"{instr.IP:X16} {output.ToStringAndReset()}");
}
}
// Simple and inefficient code writer that stores the data in a List<byte>, with a ToArray() method
// to get the data
sealed class CodeWriterImpl : CodeWriter {
readonly List<byte> allBytes = new List<byte>();
public override void WriteByte(byte value) => allBytes.Add(value);
public byte[] ToArray() => allBytes.ToArray();
}
/*
* This method produces the following output:
Disassembled code:
00007FFAC48ACDA4 push rbp
00007FFAC48ACDA5 push rdi
00007FFAC48ACDA6 push rsi
00007FFAC48ACDA7 sub rsp,50h
00007FFAC48ACDAE vzeroupper
00007FFAC48ACDB1 lea rbp,[rsp+60h]
00007FFAC48ACDB6 mov rsi,rcx
00007FFAC48ACDB9 lea rdi,[rbp-38h]
00007FFAC48ACDBD mov ecx,0Ah
00007FFAC48ACDC2 xor eax,eax
00007FFAC48ACDC4 rep stosd
00007FFAC48ACDC6 mov rcx,rsi
00007FFAC48ACDC9 mov [rbp+10h],rcx
00007FFAC48ACDCD mov [rbp+18h],rdx
*/
static void CreateInstructionsExample() {
const int bitness = 64;
var instructions = new InstructionList();
// push rbp
instructions.Add(Instruction.Create(Code.Push_r64, Register.RBP));
// push rdi
instructions.Add(Instruction.Create(Code.Push_r64, Register.RDI));
// push rsi
instructions.Add(Instruction.Create(Code.Push_r64, Register.RSI));
// sub rsp,50h
instructions.Add(Instruction.Create(Code.Sub_rm64_imm32, Register.RSP, 0x50));
// vzeroupper
instructions.Add(Instruction.Create(Code.VEX_Vzeroupper));
// lea rbp,[rsp+60h]
instructions.Add(Instruction.Create(Code.Lea_r64_m, Register.RBP, new MemoryOperand(Register.RSP, 0x60)));
// mov rsi,rcx
instructions.Add(Instruction.Create(Code.Mov_r64_rm64, Register.RSI, Register.RCX));
// lea rdi,[rbp-38h]
instructions.Add(Instruction.Create(Code.Lea_r64_m, Register.RDI, new MemoryOperand(Register.RBP, -0x38)));
// mov ecx,0Ah
instructions.Add(Instruction.Create(Code.Mov_r32_imm32, Register.ECX, 0x0A));
// xor eax,eax
instructions.Add(Instruction.Create(Code.Xor_r32_rm32, Register.EAX, Register.EAX));
// rep stosd
instructions.Add(Instruction.CreateStosd(bitness, RepPrefixKind.Rep));
// mov rcx,rsi
instructions.Add(Instruction.Create(Code.Mov_r64_rm64, Register.RCX, Register.RSI));
// mov [rbp+10h],rcx
instructions.Add(Instruction.Create(Code.Mov_rm64_r64, new MemoryOperand(Register.RBP, 0x10), Register.RCX));
// mov [rbp+18h],rdx
instructions.Add(Instruction.Create(Code.Mov_rm64_r64, new MemoryOperand(Register.RBP, 0x18), Register.RDX));
var codeWriter = new CodeWriterImpl();
ulong relocatedBaseAddress = exampleCodeRIP + 0x200000;
var block = new InstructionBlock(codeWriter, instructions, relocatedBaseAddress);
bool success = BlockEncoder.TryEncode(bitness, block, out var errorMessage);
if (!success) {
Console.WriteLine($"ERROR: {errorMessage}");
return;
}
var newCode = codeWriter.ToArray();
Console.WriteLine("Disassembled code:");
var formatter = new NasmFormatter();
formatter.Options.DigitSeparator = "`";
formatter.Options.FirstOperandCharIndex = 10;
var output = new StringBuilderFormatterOutput();
var newDecoder = Decoder.Create(bitness, new ByteArrayCodeReader(newCode));
newDecoder.IP = block.RIP;
ulong endRip = newDecoder.IP + (uint)newCode.Length;
while (newDecoder.IP < endRip) {
newDecoder.Decode(out var instr);
formatter.Format(instr, output);
Console.WriteLine($"{instr.IP:X16} {output.ToStringAndReset()}");
}
}
/*
* This method produces the following output:
00007FFAC46ACDA4 mov [rsp+10h],rbx
OpCode: REX.W 89 /r
Instruction: MOV r/m64, r64
Encoding: Legacy
Mnemonic: Mov
Code: Mov_rm64_r64
CpuidFeature: X64
FlowControl: Next
Displacement offset = 4, size = 1
Memory size: 8
Op0Access: Write
Op1Access: Read
Op0: r64_or_mem
Op1: r64_reg
RSP:Read
RBX:Read
[SS:RSP+0x10;UInt64;Write]
00007FFAC46ACDA9 mov [rsp+18h],rsi
OpCode: REX.W 89 /r
Instruction: MOV r/m64, r64
Encoding: Legacy
Mnemonic: Mov
Code: Mov_rm64_r64
CpuidFeature: X64
FlowControl: Next
Displacement offset = 4, size = 1
Memory size: 8
Op0Access: Write
Op1Access: Read
Op0: r64_or_mem
Op1: r64_reg
RSP:Read
RSI:Read
[SS:RSP+0x18;UInt64;Write]
00007FFAC46ACDAE push rbp
OpCode: 50+ro
Instruction: PUSH r64
Encoding: Legacy
Mnemonic: Push
Code: Push_r64
CpuidFeature: X64
FlowControl: Next
SP Increment: -8
Op0Access: Read
Op0: r64_opcode
RBP:Read
RSP:ReadWrite
[SS:RSP+0xFFFFFFFFFFFFFFF8;UInt64;Write]
00007FFAC46ACDAF push rdi
OpCode: 50+ro
Instruction: PUSH r64
Encoding: Legacy
Mnemonic: Push
Code: Push_r64
CpuidFeature: X64
FlowControl: Next
SP Increment: -8
Op0Access: Read
Op0: r64_opcode
RDI:Read
RSP:ReadWrite
[SS:RSP+0xFFFFFFFFFFFFFFF8;UInt64;Write]
00007FFAC46ACDB0 push r14
OpCode: 50+ro
Instruction: PUSH r64
Encoding: Legacy
Mnemonic: Push
Code: Push_r64
CpuidFeature: X64
FlowControl: Next
SP Increment: -8
Op0Access: Read
Op0: r64_opcode
R14:Read
RSP:ReadWrite
[SS:RSP+0xFFFFFFFFFFFFFFF8;UInt64;Write]
00007FFAC46ACDB2 lea rbp,[rsp-100h]
OpCode: REX.W 8D /r
Instruction: LEA r64, m
Encoding: Legacy
Mnemonic: Lea
Code: Lea_r64_m
CpuidFeature: X64
FlowControl: Next
Displacement offset = 4, size = 4
Op0Access: Write
Op1Access: NoMemAccess
Op0: r64_reg
Op1: mem
RBP:Write
RSP:Read
00007FFAC46ACDBA sub rsp,200h
OpCode: REX.W 81 /5 id
Instruction: SUB r/m64, imm32
Encoding: Legacy
Mnemonic: Sub
Code: Sub_rm64_imm32
CpuidFeature: X64
FlowControl: Next
Immediate offset = 3, size = 4
RFLAGS Written: OF, SF, ZF, AF, CF, PF
RFLAGS Modified: OF, SF, ZF, AF, CF, PF
Op0Access: ReadWrite
Op1Access: Read
Op0: r64_or_mem
Op1: imm32sex64
RSP:ReadWrite
00007FFAC46ACDC1 mov rax,[7FFAC47524E0h]
OpCode: REX.W 8B /r
Instruction: MOV r64, r/m64
Encoding: Legacy
Mnemonic: Mov
Code: Mov_r64_rm64
CpuidFeature: X64
FlowControl: Next
Displacement offset = 3, size = 4
Memory size: 8
Op0Access: Write
Op1Access: Read
Op0: r64_reg
Op1: r64_or_mem
RAX:Write
[DS:0x7FFAC47524E0;UInt64;Read]
00007FFAC46ACDC8 xor rax,rsp
OpCode: REX.W 33 /r
Instruction: XOR r64, r/m64
Encoding: Legacy
Mnemonic: Xor
Code: Xor_r64_rm64
CpuidFeature: X64
FlowControl: Next
RFLAGS Written: SF, ZF, PF
RFLAGS Cleared: OF, CF
RFLAGS Undefined: AF
RFLAGS Modified: OF, SF, ZF, AF, CF, PF
Op0Access: ReadWrite
Op1Access: Read
Op0: r64_reg
Op1: r64_or_mem
RAX:ReadWrite
RSP:Read
00007FFAC46ACDCB mov [rbp+0F0h],rax
OpCode: REX.W 89 /r
Instruction: MOV r/m64, r64
Encoding: Legacy
Mnemonic: Mov
Code: Mov_rm64_r64
CpuidFeature: X64
FlowControl: Next
Displacement offset = 3, size = 4
Memory size: 8
Op0Access: Write
Op1Access: Read
Op0: r64_or_mem
Op1: r64_reg
RBP:Read
RAX:Read
[SS:RBP+0xF0;UInt64;Write]
00007FFAC46ACDD2 mov r8,[7FFAC474F208h]
OpCode: REX.W 8B /r
Instruction: MOV r64, r/m64
Encoding: Legacy
Mnemonic: Mov
Code: Mov_r64_rm64
CpuidFeature: X64
FlowControl: Next
Displacement offset = 3, size = 4
Memory size: 8
Op0Access: Write
Op1Access: Read
Op0: r64_reg
Op1: r64_or_mem
R8:Write
[DS:0x7FFAC474F208;UInt64;Read]
00007FFAC46ACDD9 lea rax,[7FFAC46F4A58h]
OpCode: REX.W 8D /r
Instruction: LEA r64, m
Encoding: Legacy
Mnemonic: Lea
Code: Lea_r64_m
CpuidFeature: X64
FlowControl: Next
Displacement offset = 3, size = 4
Op0Access: Write
Op1Access: NoMemAccess
Op0: r64_reg
Op1: mem
RAX:Write
00007FFAC46ACDE0 xor edi,edi
OpCode: o32 33 /r
Instruction: XOR r32, r/m32
Encoding: Legacy
Mnemonic: Xor
Code: Xor_r32_rm32
CpuidFeature: INTEL386
FlowControl: Next
RFLAGS Cleared: OF, SF, CF
RFLAGS Set: ZF, PF
RFLAGS Undefined: AF
RFLAGS Modified: OF, SF, ZF, AF, CF, PF
Op0Access: Write
Op1Access: None
Op0: r32_reg
Op1: r32_or_mem
RDI:Write
*/
static void InstructionInfoExample() {
var codeReader = new ByteArrayCodeReader(exampleCode);
var decoder = Decoder.Create(exampleCodeBitness, codeReader);
decoder.IP = exampleCodeRIP;
ulong endRip = decoder.IP + (uint)exampleCode.Length;
// For PERF, use a factory to create the instruction info if you need register
// and memory usage. If it's something else, eg. encoding, flags, etc, there
// are properties on Instruction that can be used instead that don't allocate.
// The factory only allocates once and reuses the internal arrays; calling
// Instruction.GetInfo() allocates every single call.
var instrInfoFactory = new InstructionInfoFactory();
while (decoder.IP < endRip) {
decoder.Decode(out var instr);
// Gets offsets in the instruction of the displacement and immediates and their sizes.
// This can be useful if there are relocations in the binary. The encoder has a similar
// method. This method must be called after Decode() and you must pass in the last
// instruction Decode() returned.
var offsets = decoder.GetConstantOffsets(instr);
// A formatter is recommended since this ToString() method defaults to masm syntax,
// uses default options, and allocates every single time it's called.
var disasmStr = instr.ToString();
Console.WriteLine($"{instr.IP:X16} {disasmStr}");
var opCode = instr.OpCode;
var info = instrInfoFactory.GetInfo(instr);
const string tab = " ";
Console.WriteLine($"{tab}OpCode: {opCode.ToOpCodeString()}");
Console.WriteLine($"{tab}Instruction: {opCode.ToInstructionString()}");
Console.WriteLine($"{tab}Encoding: {instr.Encoding}");
Console.WriteLine($"{tab}Mnemonic: {instr.Mnemonic}");
Console.WriteLine($"{tab}Code: {instr.Code}");
Console.WriteLine($"{tab}CpuidFeature: {string.Join(" and ", instr.CpuidFeatures)}");
Console.WriteLine($"{tab}FlowControl: {instr.FlowControl}");
if (offsets.HasDisplacement)
Console.WriteLine($"{tab}Displacement offset = {offsets.DisplacementOffset}, size = {offsets.DisplacementSize}");
if (offsets.HasImmediate)
Console.WriteLine($"{tab}Immediate offset = {offsets.ImmediateOffset}, size = {offsets.ImmediateSize}");
if (offsets.HasImmediate2)
Console.WriteLine($"{tab}Immediate #2 offset = {offsets.ImmediateOffset2}, size = {offsets.ImmediateSize2}");
if (instr.IsStackInstruction)
Console.WriteLine($"{tab}SP Increment: {instr.StackPointerIncrement}");
if (instr.ConditionCode != ConditionCode.None)
Console.WriteLine($"{tab}Condition code: {instr.ConditionCode}");
if (instr.RflagsRead != RflagsBits.None)
Console.WriteLine($"{tab}RFLAGS Read: {instr.RflagsRead}");
if (instr.RflagsWritten != RflagsBits.None)
Console.WriteLine($"{tab}RFLAGS Written: {instr.RflagsWritten}");
if (instr.RflagsCleared != RflagsBits.None)
Console.WriteLine($"{tab}RFLAGS Cleared: {instr.RflagsCleared}");
if (instr.RflagsSet != RflagsBits.None)
Console.WriteLine($"{tab}RFLAGS Set: {instr.RflagsSet}");
if (instr.RflagsUndefined != RflagsBits.None)
Console.WriteLine($"{tab}RFLAGS Undefined: {instr.RflagsUndefined}");
if (instr.RflagsModified != RflagsBits.None)
Console.WriteLine($"{tab}RFLAGS Modified: {instr.RflagsModified}");
for (int i = 0; i < instr.OpCount; i++) {
var opKind = instr.GetOpKind(i);
if (opKind == OpKind.Memory || opKind == OpKind.Memory64) {
int size = instr.MemorySize.GetSize();
if (size != 0)
Console.WriteLine($"{tab}Memory size: {size}");
break;
}
}
for (int i = 0; i < instr.OpCount; i++)
Console.WriteLine($"{tab}Op{i}Access: {info.GetOpAccess(i)}");
for (int i = 0; i < opCode.OpCount; i++)
Console.WriteLine($"{tab}Op{i}: {opCode.GetOpKind(i)}");
// The returned iterator is a struct, nothing is allocated unless you box it
foreach (var regInfo in info.GetUsedRegisters())
Console.WriteLine($"{tab}{regInfo.ToString()}");
foreach (var memInfo in info.GetUsedMemory())
Console.WriteLine($"{tab}{memInfo.ToString()}");
}
}
}
}
MIT
Logo processor
by Creative Stall from the Noun Project