macOS Catalina (OpenCore Build) Lenovo ThinkPad T450

COPIED FROM ECHOESPIRITS REPO (CREDIT HIM/HER) https://github.com/EchoEsprit/Hackintosh-Catalina-OpenCore-Lenovo-T450s-efi

- Intel 5th Generation Architecture (Broadwell)
- Intel HD Graphics 5500
- Intel Series 9 Chipset Family
- macOS Catalina Catalina
- OpenCore Based Configuration
- AirPort Extreme (Broadcom BCM94360CSAX & NGFF A/E Adapter) * Recommended Upgrade
- BETA BUILD!! Not all features may function like they do in my Clover Build

Important Information For Usining OpenCore Instead Of Clover

OpenCore will not boot if CSM support is enabled in the BIOS!!! This can be confusing because usually CSM is required to successfully boot Clover but it needs to be disabled for OpenCore.
You must also remove the existing Clover configuration from your system as well in order for OpenCore to function properly. I suggest you back it up before hand as well as make a second USB installallation drive with the configuration and Clover in the EFI partition and do the same with an OpenCore drive as well.

PayPal

If you like my work then please feel free to donate. Every little bit helps! [email protected] | Paypal.me/Sass86oh

iMessage (Contact me whenever for help)

[email protected] (or [email protected])

Credits

EchoEspirit - https://github.com/EchoEsprit/Hackintosh-Catalina-OpenCore-Lenovo-T450s-efi. His LenovoT450s OpenCore build is what I used as a base for this build as I'm still learning the ins and outs of proper building on OpenCore based systems since its a radically different approach compared with my previous venture into CLOVER based Hackintosh setups and whats required to build a successful one. Keep in mind the T450s is the same as the T450 in every important aspect in building a Hackintosh system so you can use this build of his as it is. The only thing that may need editing is the settings for proper battery reporting.

OpenCore Starter Guide From OCBuilder App

OpenCore Starter Guide 0.5.3

Updated 17th October

A brief guide to using the OpenCore boot-loader for hackintoshes

OpenCore is an alternative bootloader to CloverEFI or Chameleon. It is not only for Hackintosh and can also be used on real macs for purposes that require an emulated EFI. It also aims to have the ability to boot Windows and Linux without the need for using different acpi tables. It has a clean codebase and aims to stay closer to how a real mac bootloader functions. Kext injection has been greatly improved. While already functioning well,

OpenCore should be considered in Public Beta stage at this time and is intended to be used by experienced hackintosh users, developers, or users who are happy to recover a system which fails to boot or becomes broken in some way.

This guide may not always be able to keep up with every change to OpenCore, (currently OpenCore is in active development,and therefore a moving target) please keep that in mind when compiling the latest version of OpenCore. To be safe, use release versions of OpenCore rather than the latest commits. (0.0.4 Current Release)

This guide is intended to complement the excellent opencore “configuration.pdf” rather than be used instead of it. If you did not already do so, please read it now:

Full Documentation From Acidanthera GitHub

Current known issues

Refer to opencore bugtracker for current known bugs here

Opencore Pro’s

One average, OpenCore systems boot faster than those using Clover. OpenCore offers better overall security and better support for FileVault. OpenCore supports boot hotkey support via boot.efi - hold Option or ESC at startup to choose a boot device, Command+R to enter Recovery or Command+Option+P+R to reset NVRAM. OpenCore is designed with the future in mind, and uses modern methods to inject kernel extensions without breaking System Integrity Protection. BootCamp switching and boot device selection are supported by reading NVRAM variables set by Startup Disk just like a real mac. Furture development for AptioMemoryFix is directly tied to OpenCore, specifically being absorbed into OpenCore itself with the FwRuntimeVariable.efi being used as an extension. UEFI and Legacy boot modes are supported. OpenCore Must’s

Kernel extensions are loaded in the order specified in your config file, so you must load an extension’s dependencies before you load the extension itself. For example, Lilu must be loaded before WhateverGreen or VirtualSMC. ACPI patches and SSDTs are applied to all operating systems. Some systems require pure UEFI mode to boot. (This setting is commonly called “Windows 8/10 Mode” by motherboard manufacturers.) Issues can occur if NVMe devices are set up as SATA devices in the BIOS. Getting Started

Requirements:

OpenCorePkg (Recommend to build from scratch instead of using the prebuilt package as OpenCore is constantly being updated. As of writing we’re on Version 0.5.1 even though the current official release is 0.5.0). Easiest way to build is via the macbuild.tool or Use Pavo’s Opencore Builder App to Create the Entire EFI Folder (Requires Xcode Installed) Recommended BIOS settings:

Disable:

Fast Boot CFG Lock(MSR 0xE2 write protection) VT-d(can be enabled if you set DisableIoMapper to YES) CSM Thunderbolt Intel SGX Intel Platform Trust Enable:

VT-x Above 4G decoding Hyper Threading Execute Disable Bit EHCI/XHCI Hand-off OS type: Windows 8.1/10 EFI Drivers

For the majority of systems, you only need 3 .efi drivers to get up and running:

ApfsDriverLoader.efi Needed for seeing APFS volumes. VboxHfs.efi or HfsPlus.efi Needed for seeing HFS volumes. FwRuntimeServices.efi Replacement for AptioMemoryFix.efi, used for patching boot.efi for NVRAM fixes and better memory management. For extra functionality with OpenCore:

AppleGenericInput.efi Used for Apple Hot keys and FileVault support, some firmwares may not register all the keys while booting so this can be substituted with UsbKbDxe.efi. VirtualSmc.efi Used for proper FileVault support, cannot be used with FakeSMC For a full list of compatible drivers, see 11.2 Properties in the OpenCorePkg Docs

Kexts

Please refer to Kexts.md for a full list of supported kexts

SSDTs

So you see all those SSDTs in the AcpiSamples folder and wonder whether you need any of them. Well we’ll be going over a couple to see whether you need them. Do note you’ll need to compile these SSDTs with MaciASL and please read them before compiling. Some require you to adjust them for your specific system(ie: EC0 to H_EC for SSDT-EC-USBX)

SSDT-AWAC This is the 300 series RTC patch, needed for certain Z390 systems. SSDT-RTC0 Alternative to SSDT-AWAC when not compatible with your system. SSDT-EC-USBX Needed to setup USB power and such correctly, prefered option over renaming XHCI. This SSDT is meant for Skylake+ systems, please use SSDT-EC and SSDT-EHCx_OFF for older systems. SSDT-EC Needed to setup USB power correctly on pre-skylake systems. SSDT-EHCx_OFF Prefered alternative over renaming EHCI for setting up USB correctly on pre-skylake systems. SSDT-PLUG Sets PluginType, Clover altrenative would be under Acpi -> GenerateOptions -> PluginType. Do note that this SSDT is made for systems where AppleACPICPU attaches CPU0, though some systems have theirs starting at PR00 so adjust accordingly. SSDT-SBUS-MCHC Adds a SMbus device and fixes DeviceProperties injection via _DSM which is found in your DSDT table. Most can ignore. USB drive formatted as MacOS Journaled with GUID partition map. This is to test opencore without overwriting your working Clover. Knowledge of how a hackintosh works and what files yours requires. A previously setup and functioning hackintosh is assumed: which you are happy to potentially break. Time and patience. Without these, you are wasting your effort. *Sign out of all apple services until you are sure you have MLB and ROM sections of smbios set to match your previous Clover set up. Not doing so could cause said services to cease to function, or worst case block your machine.

InsanelyHack-Discord If you need any extra help join our discord.

Pavo’s OCBuilder Creates a Basic EFI Structure with Basic Kexts which are needed to Boot XCODE App is required

Creating the USB

Creating the USB is simple, format a USB stick (any size will suffice) as MacOS Journaled with GUID partition map.

Formatting the USB

Next, mount the EFI partition on the USB with either diskutil terminal command or Clover Configurator.

mountEFI

By default, the EFI partition will be empty.

EFI folder structure

To setup OpenCore’s folder structure, copy the files from OpenCorePkg so your EFI looks like the one below:

Place necessary .efi drivers from AppleSupportPkg and AptioFixPkg into the drivers folder, then kexts/ACPI into their respective folders.

Setting up the config.plist

While sharing the name, the config.plist in OpenCore, is very different from Clover config.plist, they cannot be mixed and matched. It is also not recommended to duplicate every patch and option from your clover config.

First, duplicate the sample.plist, rename it to config.plist and open in your .plist editor of choice.

The config contains a number of sections:

ACPI: This is for loading, blocking and patching the ACPI. Booter UEFI modifications on Apple bootloader (boot.efi). DeviceProperties: This is where you’d inject PCI device properties or set Intel Framebuffer. Kernel: Where we tell OpenCore what kexts to load, what order to load and which to block. Misc: Settings for OpenCore’s boot loader itself. NVRAM: This is where we set certain NVRAM properties like boot flags and SIP. Platforminfo: This is where we setup your SMBIOS. UEFI: UEFI drivers and related options. We can delete #WARNING -1 and #WARNING -2 You did heed the warning didn’t you?

ACPI

Add: Here you add your SSDTs or custom DSDT. (SSDT-EC.aml for example)

Block: Certain systems benefit from dropping some acpi tables, most modern desktops however require nothing in this section.

Patch: In OpenCore we should be keeping ACPI device renames to a minimum as they are often harmful and unnecessary. If your system absolutely needs something, you should add it in this section. Refer to configuration.pdf.

For those who need DSDT patches for things like XHC controllers can utilize the SSDT-EC-USBX.dsl or use similar Device Property patching like what’s seen with Framebuffer patching And to grab the location of such devices can use gfxutil.

Example, common device renames are handled now by WhateverGreen on-the-fly and in a safer way: GFX0 to IGPU HECI to IMEI Do NOT do these in the config.plist nor in DSDT/SSDT.

Do NOT rename EC0 to EC as this can cause an incompatible kext (AppleACPIEC) to load and cause strange issues at any time or a non bootable system. For those who utilize 300 series RTC patch can use the SSDT-AWAC.dsl.

Quirks:

FadtEnableReset: NO Enable reboot and shutdown on legacy hardware, not recommended unless needed NormalizeHeaders: NO Cleanup ACPI header fields, only relevant for macOS High Sierra 10.13 RebaseRegions: NO Attempt to heuristically relocate ACPI memory regions, not needed unless custom DSDT is used. ResetHwSig: NO Needed for hardware that fail to maintain hardware signature across the reboots and cause issues with waking from hibernation ResetLogoStatus: NO Workaround for OEM Windows logo not drawing on systems with BGRT tables.

Booter

This section allows to apply different kinds of UEFI modifications on Apple bootloader (boot.efi). The modifications currently provide various patches and environment alterations for different firmwares. Some of these features were originally implemented as a part of AptioMemoryFix.efi, which is no longer maintained. NOTES:

Most up-to-date UEFI firmware (check your motherboard vendor website). Fast Boot and Hardware Fast Boot disabled in firmware settings if present. Above 4G Decoding or similar enabled in firmware settings if present. Note, that on some motherboards (notably ASUS WS-X299-PRO) this option causes adverse effects, and must be disabled. While no other motherboards with the same issue are known, consider this option to be first to check if you have erratic boot failures. DisableIoMapper quirk enabled, or VT-d disabled in firmware settings if present, or ACPI DMAR table dropped. No ‘slide‘ boot argument present in NVRAM or anywhere else. It is not necessary unless you cannot boot at all or see No slide values are usable! Use custom slide! message in the log. CFG Lock (MSR 0xE2 write protection) disabled in firmware settings if present. Cconsider patching it if you have enough skills and no option is available. See VerifyMsrE2 nots for more details. CSM (Compatibility Support Module) disabled in firmware settings if present. You may need to flash GOP ROM on NVIDIA 6xx/AMD 2xx or older. Use GopUpdate or AMD UEFI GOP MAKER in case you are not sure how. EHCI/XHCI Hand-off enabled in firmware settings only if boot stalls unless USB devices are disconnected. VT-x, Hyper Threading, Execute Disable Bit enabled in firmware settings if present. While it may not be required, sometimes you have to disable Thunderbolt support, Intel SGX, and Intel Platform Trust in firmware settings present. Booter Quirks

AvoidRuntimeDefrag: YES Fixes UEFI runtime services like date, time, NVRAM, power control, etc DevirtualiseMmio: NO Reduces Stolen Memory Footprint, expands options for Slide=N values but may not be ompatible with all boards. Generally useful for APTIO V firmwares(Broadwell+) DisableSingleUser: NO Disables use of Cmd+S and -s, this is closer to the behaviour of T2 based machines DisableVariableWrite: NO Needed for systems with non-functioning NVRAM like Z390 and such DiscardHibernateMap: NO Reuse original hibernate memory map, only needed for certain legacy hardware EnableSafeModeSlide: YES Allows for slide values to be used in Safemode EnableWriteUnprotector: YES Removes write protection from CR0 register during their execution ForceExitBootServices: NO Ensures ExitBootServices calls succeeds even when MemoryMap has changed, don’t use unless necessary) ProtectCsmRegion: NO Needed for fixing artifacts and sleep-wake issues, AvoidRuntimeDefrag resolves this already so avoid this quirk unless necessary ProvideCustomSlide: YES If there’s a conflicting slide value, this option forces macOS to use a pseudo-random value. Needed for those receiving Only N/256 slide values are usable! debug message SetupVirtualMap: YES Fixes SetVirtualAddresses calls to virtual addresses ShrinkMemoryMap: NO Needed for systems with large memory maps that don’t fit, don’t use unless necessary MmioWhiteList: Designed to be filled with plist dict values, describing addresses critical for particular firmware functioning when DevirtualiseMmio quirk is in use. See MmioWhitelist Properties section below. MmioWhitelist Properties

Exceptional MMIO address, which memory descriptor should be left virtualised (unchanged) by DevirtualiseMmio. This means that the firmware will be able to directly communicate with this memory region during operating system functioning, because the region this value is in will be assigned a virtual address. *The addresses written here must be part of the memory map, have EfiMemoryMappedIO type and EFI_MEMORY_RUNTIME attribute (highest bit) set. To find the list of the candidates the debug log can be used. Fixing Certain NVRAM Issues

AvoidRuntimeDefrag : Set to YES for Enabled NVRAM Reading.

EnableWriteUnprotector : Set to YES for Enabled NVRAM Writing.

NVRAM read tests should display the NVRAM information in the Hackin tool/NVRAM correctly. NVRAM write testing shall ensure that the starting disk was correctly. (Default name was must be Macintosh HD) Tested on Asus X299, Z370M-Plus II, and Gigabyte Z370 AORUS Gaming 5 and 7. This feature is based on an OpenCore 0.0.4 08082018 distribution and works with the FwRuntimeService.efi driver. 4. DeviceProperties

Add: Sets device properties from a map.

This section is set up via Headkaze’s Intel Framebuffer Patching Guide and applies only one actual property to begin, which is the ig-platform-id. The way we get the proper value for this is to look at the ig-platform-id we intend to use, then swap the pairs of hex bytes.

If we think of our ig-plat as 0xAABBCCDD, our swapped version would look like DDCCBBAA

The two ig-platform-id’s we use are as follows:

0x3E9B0007 - this is used when the iGPU is used to drive a display 07009B3E when hex-swapped 0x3E920003 - this is used when the iGPU is only used for compute tasks and doesn’t drive a display 0300923E when hex-swapped Worth noting that for 10.12 -> 10.13.5, you would need to fake the iGPU to the same values in the Kaby Lake guide, as this was before native Coffee Lake iGPU showed up.

We also add 2 more properties, framebuffer-patch-enable and framebuffer-stolenmem. The first enables patching via WhateverGreen.kext, and the second sets the min stolen memory to 19MB. This is usually unnecessary, as this can be configured in BIOS.

I added another section as well that shows a fake device-id for the i3-8100’s UHD 630. This has a different device id than the UHD 630 found on the 8700k, for instance, (3e918086 vs 3e928086 ).

For this - we follow a similar procedure as our above ig-platform-id hex swapping - but this time, we only work with the first two pairs of hex bytes. If we think of our device id as 0xAABB0000, our swapped version would look like 0xBBAA0000. We don’t do anything with the last 2 pairs of hex bytes.

The device-id fake is set up like so:

0x3e920000 - this is the device id for the UHD 630 found on an 8700k 923e0000 when hex swapped Note: FakeID is only required for High Sierra, Mojave doesn’t require this

PciRoot(0x0)/Pci(0x1f,0x3) -> Layout-id

Applies AppleALC audio injection, you’ll need to do your own research on which codec your motherboard has and match it with AppleALC’s layout. AppleALC Supported Codecs. Keep in mind that some motherboards have different device locations, you can find yours by either examining the device tree in IOReg or using gfxutil. Please note that ADR for HDAS/HDEF is 0x001F0003 and Path = PciRoot(0x0)/Pci(0x1f,0x3), PciRoot(0x0)/Pci(0x1b,0x0) is for previous series

Do note that layout-id is a Data value meaning you will need to convert from Number to HEX so Layout=5 would be interpreted as <05000000> and Layout=11 would be <0B000000>

Fun Fact: The reason the byte order is swapped is due to Endianness, specifcally Little Endians that modern CPUs use for ordering bytes. The more you know!

Block: Removes device properties from map, for us we can ignore this

Kernel

Add: Here we can specify kexts to inject from our EFI into the kernel kextcache. Order of kexts is important, they are loaded in this order. Plugins for other kexts should always come after the main kext. Lilu should be first, then Lilu plugins like WhateverGreen and VirtualSMC.

BundlePath Name of the kext ex: Lilu.kext Enabled Self explaitroy, either enables or diables the kext Executableath Path to the actual executable hidden within the kext, you can see what path you kext has by right clicking and selecting Show Package Contents. Generally they’ll be Contents/MacOS/Kext but some have kexts hiddin within under Plugin folder. Do note that Plist only kexts do not need this filled in. ex: Contents/MacOS/Lilu PlistPath Path to the info.plist hidden within the kext ex: Contents/Info.plist Emulate: Needed for spoofing unsupported CPUs like Pentiums and Celerons

CpuidMask: When set to Zero, original CPU bit will be used <Clover_FCPUID_Extended_to_4_bytes_Swapped_Bytes> | 00 00 00 00 | 00 00 00 00 | 00 00 00 00 ex: CPUID 0x0306A9 would be A9 06 03 00 | 00 00 00 00 | 00 00 00 00 | 00 00 00 00 CpuidData: The value for the CPU spoofing FF FF FF FF | 00 00 00 00 | 00 00 00 00 | 00 00 00 00 Swap 00 for FF if needing to swap with a longer value Block: Blocks kexts from loading. Sometimes needed for disabling Apple’s trackpad driver for some laptops.

Patch: Patches kexts (this is where you would add newer USB port limit patches and AMD CPU patches. Do note that the XhciPortLimit quirk is preferred for USB port limit patches).

Quirks:

AppleCpuPmCfgLock: NO Only needed when CFG-Lock can’t be disabled in BIOS, Clover counterpart would be AppleICPUPM AppleXcpmCfgLock: NO Only needed when CFG-Lock can’t be disabled in BIOS, Clover counterpart would be KernelPM AppleXcpmExtraMsrs: NO Disables multiple MSR access needed for unsupported CPUs like Pentiums and certain Xeons CustomSMBIOSGuid: NO Performs GUID patching for UpdateSMBIOSMode Custom mode. Usually relevant for Dell laptops DisableIOMapper: YES Needed to get around VT-D if either unable to disable in BIOS or needed for other operating systems ExternalDiskIcons: YES External Icons Patch, for when internal drives are treated as external drives but can also make USB drives internal. For NVMe on Z87 and below you just add built-in property via DeviceProperties. LapicKernelPanic: NO Disables kernel panic on AP core lapic interrupt, generally needed for HP systems. Clover equivalent is Kernel LAPIC PanicNoKextDump: YES Allows for reading kernel panics logs when kernel panics occurs. PowerTimeoutKernelPanic: NO An additional security measure was added to macOS Catalina (10.15) causing kernel panic on power change timeout for Apple drivers. Sometimes it may cause issues on misconfigured hardware, notably digital audio, which sometimes fails to wake up. For debug kernels \texttt{setpowerstate_panic=0} boot argument should be used, which is otherwise equivalent to this quirk. ThirdPartyTrim: NO Enables TRIM, not needed for NVMe but AHCI based drives may require this. Please check under system report to see if your drive supports TRIM XhciPortLimit: YES This is actually the 15 port limit patch, don’t rely on it as it’s not a guaranteed solution for fixing USB. Please create a USB map when possible as. The reason being is that UsbInjectAll reimplements builtin macOS functionality without proper current tuning. It is much cleaner to just describe your ports in a single plist-only kext, which will not waste runtime memory and such

Misc

Boot: Settings for boot screen (leave as-is unless you know what you’re doing)

HibernateMode: None Best to avoid hibernation with hackintoshes all together HideSelf: YES Hides the EFI partition as a boot option in OC’s boot picker PollAppleHotKeys: YES Allows you to use Apple’s hot keys during boot, needs to be used in conjunction with either AppleGenericInput.efi or UsbKbDxe.efi depending on the firmware. Popular commands: Cmd+V: Enables verbose Cmd+Opt+P+R: Cleans NVRAM Cmd+R: Boots Recovery partition Cmd+S: Boot in Singleuser mode Option/Alt: Shows boot picker when ShowPicker set to NO, alternative is ESC key Timeout: 5 This sets how long OpenCore will wait until it automatically boots from the default selection ShowPicker: YES Shows OpenCore’s UI, needed for seeing your available drives or set to NO to follow default option UsePicker: YES Uses OpenCore’s default GUI, set to NO if you wish to use a different GUI Debug: Debug has special use cases, leave as-is unless you know what you’re doing.

DisableWatchDog: NO (May need to be set for YES if macOS is stalling on something while booting, generally avoid unless troubleshooting) Security: Security is pretty self-explanatory.

AllowNvramReset: YES Allows for NVRAM reset both in the boot picker and when pressing Cmd+Opt+P+R RequireSignature: NO We won’t be dealing vault.plist so we can ignore RequireVault: NO We won’t be dealing vault.plist so we can ignore as well ScanPolicy: 0 0 allows you to see all drives available, please refer to Security section for furthur details Tools Used for running OC debugging tools like clearing NVRAM

Name Name shown in OpenCore Enabled Self explanitory, enables or disables Path Path to file after the Tools folder ex: Shell.efi Entires: Used for specifying iregular boot paths that can’t be found naturally with OpenCore

Name Name shown in boot picker Enabled Self explanitory, enables or disables Path PCI route of boot drive, can be found with the OpenCoreShell and the map command ex: PciRoot(0x0)/Pci(0x1D,0x4)/Pci(0x0,0x0)/NVMe(0x1,09-63-E3-44-8B-44-1B-00)/HD(1,GPT,11F42760-7AB1-4DB5-924B-D12C52895FA9,0x28,0x64000)/\EFI\Microsoft\Boot\bootmgfw.efi Emulated NVRAM and NVRAM

Add: 4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14 (Booter Path, majority can ignore but )

UIScale: 01: Standard resolution(Clover equivalent is 0x28) 02: HiDPI (generally required for FileVault to function correctly on smaller displays, Clover equivalent is 0x2A) 7C436110-AB2A-4BBB-A880-FE41995C9F82 (System Integrity Protection bitmask)

boot-args: -v - this enables verbose mode, which shows all the behind-the-scenes text that scrolls by as you’re booting instead of the Apple logo and progress bar. It’s invaluable to any Hackintosher, as it gives you an inside look at the boot process, and can help you identify issues, problem kexts, etc. dart=0 - this is just an extra layer of protection against Vt-d issues, keep in mind this requires SIP to be disabled debug=0x100 - this prevents a reboot on a kernel panic. That way you can (hopefully) glean some useful info and follow the breadcrumbs to get past the issues. keepsyms=1 - this is a companion setting to debug=0x100 that tells the OS to also print the symbols on a kernel panic. That can give some more helpful insight as to what’s causing the panic itself. shikigva=40 - this flag is specific for Nvidia users. It enables a few Shiki settings that do the following (found here): 8 - AddExecutableWhitelist - ensures that processes in the whitelist are patched. 32 - ReplaceBoardID - replaces board-id used by AppleGVA by a different board-id. Do note that this generally needed for systems running Nvidia GPUs csr-active-config: Settings for SIP, generally recommended to manually change this within Recovery partition with csrutil via the recovery partition csr-active-config is set to E7030000 which effectively disables SIP. You can choose a number of other options to enable/disable sections of SIP. Some common ones are as follows:

00000000 - SIP completely enabled 30000000 - Allow unsigned kexts and writing to protected fs locations E7030000 - SIP completely disabled nvda_drv: <> For enabling Nvidia WebDrivers, set to 31 if running a Maxwell or Pascal GPU. This is the same as setting nvda_drv=1 but instead we translate it from text to hex prev-lang:kbd: <> Needed for non-latin keyboards Block: Forcibly rewrites NVRAM variables, not needed for us as sudo nvram is prefered but useful for those edge cases. Note that Add will not overwrite values already present in NVRAM

LegacyEnable: NO

Allows for NVRAM to be stored on nvram.plist, needed for systems without native NVRAM LegacySchema

Used for assigning NVRAM variables, used with LegacyEnable set to YES Emulated NVRAM

So this section is for those who don’t have native NVRAM, Hardware to have incompatible native NVRAM with macOS are the Z390-300 series chipsets:

B360 B365 H310 H370 Q370 Z390 Making the nvram.plist

Outlay’s to making a NVRAM.plist file, Requires the following:

Change these settings within the config.plist:

Booter Section

DisableVariableWrite: set to YES NVRAM Section LegacyEnable: set to YES LegacySchema: NVRAM variables set and injected into OpenCore and compares these variables present in nvram.plist Security Section ExposeSensitiveData: set to 0x3 (Which allows all data exposure) And within your EFI:

FwRuntimeServices.efi (Needed for sleep, wake and shutdown and other services to work correctly (Goes in the EFI/OC/Drivers Folder) Now grab the ‘LogoutHook.command’ and place it somewhere safe like within your user directory:

/Users/(your username)/LogoutHook/LogoutHook.command

Open up terminal and run the following:

sudo defaults write com.apple.loginwindow LogoutHook /Users/(your username)/LogoutHook/LogoutHook.command

Now you have emulated NVRAM, Just to note that for macOS to support the -x flag and work correctly which is unavailable on 10.12 and below. nvram.mojave fixes this by injecting it instead of the system based one.

Platforminfo

This section used be filled in correctly to avoid errors, if using non automatic setup make sure (DATA, BOOLEAN, STRING) types are set as shown in the Sampleconfig.plist or setting up the SMBIOS info, we’ll use acidanthera’s macserial application.

To get the SMBIOS info generated with macserial, you can run it with the -a argument (which generates serials and board serials for all supported platforms). You can also parse it with grep to limit your search to one SMBIOS type.

For this Coffee Lake example, I chose the iMac18,1 SMBIOS - this is done intentionally for compatibility’s sake. There are two main SMBIOS used for Kaby Lake:

iMac18,1 - this is used for computers utilizing the iGPU for displaying. iMac18,3 - this is used for computers using a dGPU for displaying, and an iGPU for compute tasks only. To get the SMBIOS info generated with macserial, you can run it with the -a argument (which generates serials and board serials for all supported platforms). You can also parse it with grep to limit your search to one SMBIOS type.

With our iMac18,1 example, we would run macserial like so via the terminal:

macserial -a | grep -i iMac18,1

Which would give us output similar to the following:

The iMac18,1 part gets copied to Generic -> SystemProductName.

The Serial part gets copied to Generic -> SystemSerialNumber.

The Board Serial part gets copied to Generic -> MLB.

We can create an SmUUID by running uuidgen in the terminal (or it’s auto-generated via my GenSMBIOS script) - and that gets copied to Generic -> SystemUUID.

We set Generic -> ROM to either an Apple ROM (dumped from a real Mac), your NIC MAC address, or any random MAC address (could be just 6 random bytes, for this guide we’ll use 11223300 0000)

Automatic: YES

Generates PlatformInfo based on Generic section instead of DataHub, NVRAM, and SMBIOS sections SpoofVendor: YES Swaps vendor field for Acidanthera, generally not safe to use Apple as a vendor in most case UpdateDataHub: YES Update Data Hub fields UpdateNVRAM: YES

Update NVRAM fields UpdateSMBIOS: YES

Updates SMBIOS fields UpdateSMBIOSMode: Create

Replace the tables with newly allocated EfiReservedMemoryType, use Custom on Dell laptops requiring CustomSMBIOSGuid quirk 9. UEFI

ConnectDrivers: YES

Forces .efi drivers, change to NO will automatically connect added UEFI drivers. This can make booting slightly faster, but not all drivers connect themselves. E.g. certain file system drivers may not load. Drivers: Add your .efi drivers here

Protocols: (Most values can be ignored here as they’re meant for real Macs/VMs)

ConsoleControl: YES Replaces Console Control protocol with a builtin version, set to YES otherwise you may see text output during booting instead of nice Apple logo. Required for most APTIO firmware FirmwareVolume: NO Fixes UI regarding Filevault, set to YES for better FileVault compatibilty HashServices: NO Fixes incorrect cusor size when running FileVault, set to YES for better FileVault compatibilty UnicodeCollation: NO Some older firmware have broken unicode collation, fixes UEFI shell compatibility on these systems(generally IvyBridge and older) Quirks:

AvoidHighAlloc: NO Workaround for when te motherboard can’t properly access higher memory in UEFI Boot Services. Avoid unless necessary(affected models: GA-Z77P-D3 (rev. 1.1)) ExitBootServicesDelay: 0 Only required for very specific use cases like setting to 5 for ASUS Z87-Pro running FileVault2 IgnoreInvalidFlexRatio: NO Fix for when MSR_FLEX_RATIO (0x194) can’t be disabled in the BIOS, required for all pre-skylake based systems IgnoreTextInGraphics: NO Fix for UI corruption when both text and graphics outputs happen, set to YES with SanitiseClearScreen also set to YES for pure Apple Logo(no verbose screen) ProvideConsoleGop: YES Enables GOP(Graphics output Protcol) which the macOS bootloader requires for console handle ReleaseUsbOwnership: NO Releases USB controller from firmware driver, avoid unless you know what you’re doing. Clover equivalent is FixOwnership RequestBootVarRouting: NO Redirects AptioMemeoryFix from EFI_GLOBAL_VARIABLE_GUID to OC_VENDOR_VARIABLE_GUID. Needed for when firmware tries to delete boot entries and is recommended to be enabled on all systems for correct update installation, Startup Disk control panel functioning, etc. ReplaceTabWithSpace: NO Depending on firmware, some system may need this to properly edit files in the UEFI shell when unable to handle Tabs. This swaps it for spaces instead but majority can ignore it but do note that ConsoleControl set to True may be needed SanitiseClearScreen: NO Fixes High resolutions displays that display OpenCore in 1024x768, recommened for user with 1080P+ displays ClearScreenOnModeSwitch: NO Needed for when half of the previously drawn image remains, will force black screen before switching to TextMode. Do note that ConsoleControl set to True may be needed AMD Zen Based CPU’s and Threadripper

Starting Point

You’ll want to start with the sample.plist that OpenCorePkg provides you and rename it to config.plist. Next, open up your favourite XML editor like Xcode and we can get to work.

Kernel patches:

Ryzen/Threadripper(17h) (10.13, 10.14, and 10.15) Bulldozer/Jaguar(15h/16h) (10.13, 10.14, and 10.15) Do note that these patches are pulled from the AMD OS X discord and that they’re made for OpenCore 0.5.0. Users of 0.5.1 will need to wait for updated patches.

Extra Importamt Note: Current kernel patches will only work with 041045f and older. To ease users experiences, please use OpenCorePkg 0.5.0

Time to boot with OpenCore!

AboutThisMac

Making Opencore your default Bootloader

When you are satisfied opencore boots your system correctly, simply mount your Clover efi partition, (back it up somewhere safe) and overwrite it with your OpenCore one. Certain system BIOS may require you to manually remove Clover as an EFI boot option (rarely some system might need a factory reset to permanently remove it).

Legacy Install

OpenCore supports DuetPkg which emulates a UEFI environment for legacy systems.

To start, you need the following:

BootInstall.command Install source Within your OpenCore build folder, navigate to Utilities/BootInstall. Here you’ll find a file called BootInstall.command. What this does is install DuetPkg to your desired drive.

Now you’ll want to run BootInstall.command, do note that you may need sudo for this to work correctly on newer versions of macOS

sudo Utilities/BootInstall/BootInstall.command This will give you a list of available disks, choose yours and you will be prompted to write a new MBR. Choose yes[y] and you’ll be finished. This will provide you with an EFI partition with a boot file, this is where we’ll add our OpenCore EFI.

TroubleShooting

Stuck on EndRandomSeed

Couple problems:

ProvideConsoleGop is likely missing as this is needed for transitioning to the next screen, this was originally part of AptioMemoryFix but is now within OpenCore as this quirk Other possible problem is that some users either forget or cannot disable CFG-Lock in the BIOS(specifically relating to a locked 0xE2 MSR bit for power managment, obviously much safer to turn off CFG-Lock). When this happens, there’s a couple fixes:

Enable AppleXcpmCfgLock, this disables PKG_CST_CNFIG_CONTROL within the XNU itself and likely the cause of the stall. Clover equivalent is KernelPm Enable AppleXcpmCfgLock, this disables PKG_CST_CNFIG_CONTROL within AppleIntelCPUPowerManagment. Clover equivalent is AppleIntelCPUPM Still waiting on root device

Gernally seen as a USB error, couple ways to fix: if you’re hitting the 15 port limit, you can temporarily get around this with XhciPortLimit but for long term use we recommend making a USBmap. CorpNewt also has a guide for this: USBmap Guide Other issue can be that certain firmwares won’t pass USB ownership to macOS, to fix this we can enable ReleaseUsbOwnership. Clover equivalent is FixOwnership iMessage and Siri Broken

En0 device not setup as Built-in, couple ways to fix: Find PCI path for your NIC with gfxutil(ex: ethernet@0). Then via DeviceProperties in your config.plist, apply the property of built-in with the value of 01 and type Data NullEthernet.kext + SSDT-RMNE Windows Startup Disk can’t see APFS drives

Outdated Bootcamp drivers(generally ver 6.0 will come with brigadier, BootCamp Utility in macOS provides newer version like ver 6.1). InsanelyHack has also forked brigadier fixing these issues as well: brigadier Incorrect resolution with OpenCore

Follow Hiding Verbose for correct setup, set UIScale to 02 for HiDPI Users also have noticed that setting ConsoleMode to Max will sometimes fail, leaving it empty can help Receiving “Failed to parse real field of type 1”

A value is set as real when it’s not supposed to be, generally being that Xcode converted HaltLevel by accident: ``` HaltLevel 2147483648 To fix, swap real for `integer`: HaltLevel 2147483648


Booting OpenCore reboots to BIOS

Incorrect EFI folder structure, make sure all of your OC files are within an EFI folder located on your ESP(EFI system partition)
Directory Structure from OpenCore's DOC

How to Enable a bootchime?

Copy BootChimeDxe.efi & AudioDxe.efi to OC/Drivers folder.
Copy BootChimeCgf.efi & HdaCodecDump.efi to OC/Tools folder.
Bootchime can be played through the WAV file in the EFI root folder.
Add BootChimeDxe.efi & AudioDxe.efi drivers to UEFI/Drivers in Config.plist.
Add BootChimeCfg.efi & HdaCodecDump.efi drivers to Misc/Tools in Config.plist.
Reboot & wait a few seconds.
The default sound reproduction is line 1 of the built-in sound, and the speaker volume depends on the NVRAM setting.
Credits

khtonokernel For the Orginal Guide Which is amazing!
Apple for MacOS.
Acidanthera for everything they contribute to hackintosh. :)
Pavo-IM for Opencore Builder and edits
ZISQO to translate this guide for korean language and update gigabyte and asus data.
MacProDude for images and guide rewrite
AlGrey AMD Kernel patches
InsanelyMac For finding issues and solutions to different hardware issues
Developers of OpenCore:

Download-Fritz
Goldfish64
savvamitrofanov
vit9696

ishangavidusha / lenovo-t450-catalina-opencore Goto Github PK

lenovo-t450-catalina-opencore's Introduction

macOS Catalina (OpenCore Build) Lenovo ThinkPad T450

COPIED FROM ECHOESPIRITS REPO (CREDIT HIM/HER) https://github.com/EchoEsprit/Hackintosh-Catalina-OpenCore-Lenovo-T450s-efi

Important Information For Usining OpenCore Instead Of Clover

PayPal

iMessage (Contact me whenever for help)

Credits

OpenCore Starter Guide From OCBuilder App

Quirks:

lenovo-t450-catalina-opencore's People

Contributors

Watchers

Recommend Projects

React

Vue.js

Typescript

TensorFlow

Django

Laravel

D3

Recommend Topics

javascript

web

server

Machine learning

Visualization

Game

Recommend Org

Facebook

Microsoft

Google

Alibaba

D3

Tencent