jaymzh / concordance Goto Github PK
View Code? Open in Web Editor NEWProgram Harmony remote controls from Linux, Windows, or Mac!
License: GNU General Public License v3.0
Program Harmony remote controls from Linux, Windows, or Mac!
License: GNU General Public License v3.0
FYI, there seems to be some magic dance involved with Windows 10 and Concordance:
Setting up device
A device is undergoing additional setup.
Device setup complete
Device 'Harmony Remote 0-4.4.2' has completed setup.
concordance.exe -v -i
works fineconcordance.exe -v -c test.EZHex
), concordance just freezes until I unplug my remote when it fails with:ERROR: failed to requesting identity
Failed with error 1
^C
, even the -i
command won't work anymore, nothing just happensUSB Input Device
and/or HID-compliant vendor-defined device
with VID_046D&PID_C110
) from the Device Manager and everything goes to the initial state before the Setting up device
promptUSB CONNECTED
and Windows has not configured the device yet, everything works including flashing
So, it seems there's something funky going on with Windows and USB.
Thank you for your work!
The get-time function doesn't work.
Reproduce Steps:
concordance --set-time
concordance --get-time
Actual Result:
Remote time is 0000/00/00 Sun 00:00:00 +0
Failed with error 9
Expected Result:
It should print the expeted datetime by running set-time
set-time:
`linrex:harmoney$ concordance --set-time
Concordance 1.2
Copyright 2007 Kevin Timmerman and Phil Dibowitz
This software is distributed under the GPLv3.
Requesting identity: 100% done
Setting time: 100% done
Remote time has been set to 2020/01/08 Wed 14:51:10 +0
Success!`
get-time:
linrex:harmoney$ concordance --get-time
Concordance 1.2
Copyright 2007 Kevin Timmerman and Phil Dibowitz
This software is distributed under the GPLv3.
Requesting identity: 100% done
Remote time is 0000/00/00 Sun 00:00:00 +0
Failed with error 9
This is being moved from https://sourceforge.net/p/concordance/bugs/39/
Observed that 'make install' fails for libconcord of Concordance 1.0 on Linux (Ubuntu 13.04) if current directory contains spaces.
Excerpt of make output below. Current directory is /home/VFIefq/foo bar/.
libtool: install: chmod 644 /usr/local/lib/libconcord.a
libtool: install: ranlib /usr/local/lib/libconcord.a
/bin/bash: /home/VFIefq/foo: No such file or directory
make[1]: *** [install-libLTLIBRARIES] Error 127
I am not sure which milestone to select for this bug.
Hello,
Install Congruity-20.1 on Ubuntu 20.04. Attempted to login to MyHarmony using my email & password for my MyHarmony account. Fails to recognise the account. "Username and/or Password Incorrect".
What am I doing wrong?
TIA
There's a Guide to getting Pronto Hex Codes into your Harmony Remote posted here:
https://www.avforums.com/threads/guide-to-getting-pronto-hex-codes-into-your-harmony-remote.1510519/
Basically, if you're working off of an "extended IR" set, where you have no button on the remote for the command, where the commands only come from a PDF document or a spreadsheet published by a manufacturer, then there's no way to get those into the Harmony without going through Harmony support and waiting forever for them to add them.
I was trying to follow that guide but that old version of Concordance (0.2) that comes with that zip doesn't work. So, I grabbed 1.3a. However, 1.3a doesn't seem to have the ability to use the [H]ex option, only the [L]earn option, when processing a LearnIr.EZTut. What happened to the Pronto Hex format support mentioned here: https://sourceforge.net/p/concordance/mailman/search/?q=pronto+hex
It appears from reading that those patches never made it into the official release. Would it be possible to still get those patches merged in? Being able to have the Harmony learn from Hex input is a very valuable capability.
I have now got concordance running (with #31) and did -b -f
, -b -s
and -b -c
, but it raised some more questions:
But also:
I'm trying to use this to program my Harmony One+ because the MyHarmony simply stinks. However, I'm baffled about how to actually set up and use it. The referenced website looks like it may no longer be functional. I cannot log in or use it from a browser, even with the recommend Chrome extension. Does this software still work? What am I doing wrong here?
This was migrated from: https://sourceforge.net/p/concordance/feature-requests/6/
It would be very nice to have proxy server support in concordance / congruity, as many people are sitting behind proxies. If that is not easily possible, it would be good mention in some readme file that proxies are currently not supported.
This is being imported from: https://sourceforge.net/p/concordance/bugs/43/
There is a patch at the old ticket, and we'll close this once a release is out the door with that support.
On Windows, Concordance fails to connnect to members.harmonyremote.com, even though the site has a valid SSL cert. This applies to the released download and when I compile from the main branch.
Libcurl attempted to open ca-bundle.crt from a compiled-in location that is non-existent on Windows (/usr/i686-w64-mingw32/sys-root/mingw/etc/pki/tls/certs/ca-bundle.crt) and failed. Libcurl did not use Windows' system CA store for validation by default.
Fix A: To use Windows' system CA store, I added the following to the list of options in the Zap function in libconcord's web.cpp:
curl_easy_setopt(curl, CURLOPT_SSL_OPTIONS, CURLSSLOPT_NATIVE_CA);
This worked. Libcurl was able to use Windows' system CA store to successfully verify the certificate, and it did not need the ca-bundle.crt file. (It tries to load it, sees it's missing, and continues on instead of failing.)
Fix B: The Concordance installer does not provide a copy of ca-bundle.crt. And just copying ca-bundle.crt to the program directory does not solve the problem. However, if I copy it and pass the path to ca-bundle.crt to libcurl using
curl_easy_setopt(curl, CURLOPT_CAINFO, "C:\\Program Files (x86)\\Concordance\\ca-bundle.crt");
then it works. (Production code would, of course, not use a hardcoded path.)
Workaround C: Disabling SSL cert verification works as well, as presented in Issue #48.
========== Traces Below ==========
Here's the error on Windows without any code changes (output is from _DEBUG
):
* processing: https://members.harmonyremote.com/EasyZapper/New/ProcConnectivity/Connectivity_Receive_Zaps.asp
* Trying 52.44.86.125:443...
* Connected to members.harmonyremote.com (52.44.86.125) port 443
* ALPN: offers http/1.1
* error setting certificate file: /usr/i686-w64-mingw32/sys-root/mingw/etc/pki/tls/certs/ca-bundle.crt
* error setting certificate file: /usr/i686-w64-mingw32/sys-root/mingw/etc/pki/tls/certs/ca-bundle.crt
* Closing connection
* error setting certificate file: /usr/i686-w64-mingw32/sys-root/mingw/etc/pki/tls/certs/ca-bundle.crt
DEBUG (Zap): curl_easy_perform() failed: Problem with the SSL CA cert (path? access rights?)
Failed with error 13
The connection succeeds when I set CURLSSLOPT_NATIVE_CA
, no other changes:
* processing: https://members.harmonyremote.com/EasyZapper/New/ProcConnectivity/Connectivity_Receive_Zaps.asp
* Trying 52.44.86.125:443...
* Connected to members.harmonyremote.com (52.44.86.125) port 443
* ALPN: offers http/1.1
* successfully imported Windows CA store
* error setting certificate file, continuing anyway
* CAfile: /usr/i686-w64-mingw32/sys-root/mingw/etc/pki/tls/certs/ca-bundle.crt
* CApath: none
* SSL connection using TLSv1.2 / ECDHE-RSA-AES256-GCM-SHA384
* ALPN: server accepted http/1.1
* Server certificate:
* subject: CN=members.harmonyremote.com
* start date: Dec 12 03:58:41 2023 GMT
* expire date: Mar 11 03:58:40 2024 GMT
* subjectAltName: host "members.harmonyremote.com" matched cert's "members.harmonyremote.com"
* issuer: C=US; O=Let's Encrypt; CN=R3
* SSL certificate verify ok.
* using HTTP/1.1
> POST /EasyZapper/New/ProcConnectivity/Connectivity_Receive_Zaps.asp HTTP/1.1
--<snip>--
< HTTP/1.1 200 OK
The connection also succeeds when I copy ca-bundle.crt to the program directory and set CURLOPT_CAINFO
to point at the ca-bundle.crt file, no other changes:
* processing: https://members.harmonyremote.com/EasyZapper/New/ProcConnectivity/Connectivity_Receive_Zaps.asp
* Trying 52.44.86.125:443...
* Connected to members.harmonyremote.com (52.44.86.125) port 443
* ALPN: offers http/1.1
* CAfile: C:\Program Files (x86)\Concordance\ca-bundle.crt
* CApath: none
* SSL connection using TLSv1.2 / ECDHE-RSA-AES256-GCM-SHA384
* ALPN: server accepted http/1.1
* Server certificate:
* subject: CN=members.harmonyremote.com
* start date: Dec 12 03:58:41 2023 GMT
* expire date: Mar 11 03:58:40 2024 GMT
* subjectAltName: host "members.harmonyremote.com" matched cert's "members.harmonyremote.com"
* issuer: C=US; O=Let's Encrypt; CN=R3
* SSL certificate verify ok.
* using HTTP/1.1
> POST /EasyZapper/New/ProcConnectivity/Connectivity_Receive_Zaps.asp HTTP/1.1
--<snip>--
< HTTP/1.1 200 OK
At the moment of this typing I'm unable to test concordance directly, but earlier today I was using congruity and it was failing to notify the website that the connectivity test was complete. Forgetting about the concordance component I reported this in the congruity issues (congruity/congruity#7) but this probably needs to be looked at from the concordance level. At minimum an issue should probably exist just to allow users to see that there may be a current issue. The certificate used by members.harmonyremote.com expired a few days ago and I doubt the error in congrutiy is just a coincidence.
Can concordance be tested and reviewed to confirm if the certificate is the issue, and if so could it either be (hopefully just) temporarily patched or a end-user workaround be documented?
System:
Ubuntu 14.04.2 LTS
Firefox 39.0 (Mozilla Firefox for Ubuntu - canonical 1.0)
firefox running as root using sudo (I find this is necessary to successfully access Harmony firmware)
Steps to reproduce:
Perhaps I need my browser to spoof something else?
Apologies in advance if this is a noob issue. Sorry.
This is migrated from https://sourceforge.net/p/concordance/bugs/38/
libconcord and concordance compiled from git. Using a Harmony 200, about the only thing that seems to work is listing the remote info. Everything else just errors out.
parker@chrubuntu:~$ sudo concordance -i -v
Concordance 1.0
Copyright 2007 Kevin Timmerman and Phil Dibowitz
This software is distributed under the GPLv3.
Requesting identity: 100% done
Model: Logitech Harmony 200
Skin: 80
Firmware Version: 2.8
Firmware Type: 0
Hardware Version: 0.0.0
External Flash: 512 KiB - FF:12 25F040
Architecture: 16
Protocol: 9
Manufacturer: HarmonyRemote.com!
Product: Caffeine
IRL, ORL, FRL: 64, 64, 0
USB VID: 046D
USB PID: C125
USB Ver: 1080
Serial Number: {EEEEEEEE-EEEE-EEEE-EEEE-EEEEEEEEEEEE}
{D8A6FF4F-5C25-413A-A869-084E035F3DBC}
{1BC9F028-DD80-46F4-9175-C48E4B0625E5}
Config Flash Used: 99% (0 of 1 KiB)
Success!
parker@chrubuntu:~$ sudo concordance -r -v
Concordance 1.0
Copyright 2007 Kevin Timmerman and Phil Dibowitz
This software is distributed under the GPLv3.
Resetting...
Success!
parker@chrubuntu:~$ sudo concordance -c -v
Concordance 1.0
Copyright 2007 Kevin Timmerman and Phil Dibowitz
This software is distributed under the GPLv3.
Requesting identity: 100% done
Failed to dump config: Error while reading from the remote
Failed with error 3
parker@chrubuntu:~$ sudo concordance -f -v
Concordance 1.0
Copyright 2007 Kevin Timmerman and Phil Dibowitz
This software is distributed under the GPLv3.
Requesting identity: 100% done
Failed to dump firmware: Error while reading from the remote
Failed with error 3
dmesg output
[31006.715574] usb 2-1.4: new full-speed USB device number 9 using ehci-pci
[31006.803183] usb 2-1.4: New USB device found, idVendor=046d, idProduct=c125
[31006.803196] usb 2-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[31006.803203] usb 2-1.4: Product: Caffeine
[31006.803209] usb 2-1.4: Manufacturer: HarmonyRemote.com
(Note: I have not used concordance yet, but I'm looking for like-minded people, so I'm posting here)
I'm interested in understanding how these remotes work. I'll leave some references here and hope others share their findings / knowledge.
I've already looked at files from:
As a general overview, the regions (from 61.7.5) via file
and binwalk
:
64 0x40 QNX IFS, size: 3359776 bytes, machine-type: 0x28, little endian, UCL-compressed, version: 1
64 0x40 QNX IFS, size: 3359776 bytes, machine-type: 0x28, little endian, UCL-compressed, version: 1
Things I'd like to know:
I'm primarily interested in knowledge about Harmony One, but I was unable to find any firmwares for that yet - help would be appreciated.
I might make an emulator or custom firmware, depending how hard it is. I'm really bothered by the slowness of the device and the limited set of features.
The website at http://members.harmonyremote.com contains a generic IIS page, as if the entire members portal has been blown away.
The new website https://support.myharmony.com insist that you must install their app for Windows/Mac, which they will not even allow download using a Linux browser, so I haven't tried using wine yet.
Is this a Concordance killer? Has anyone found a way around it?
I can log in to https://members.harmonyremote.com/EasyZapper/UserHome.asp with my account and see my devices, etc. but as soon as I click on Add a Device I am taken to a Software Update Available page with just a Next button that goes to a dead link.
Same for Remove a Device.
Anyone able to use either of these functions on this website now?
I just discovered that http://members.harmonyremote.com/ is gone. There's a new site at https://setup.myharmony.com/ that if you poke around, you can almost get to a web configuration tool, but it refuses to run for a browser on Linux. By faking an IE useragent, I managed to get a page or two into it and create a new myharmony account, but then it wanted me to install Microsoft Silverlight...
This is obviously not a bug with concordance. But this seems like as good a place as any to see if a workaround can be found and share it.
I just found out about Concordance and am trying to make it work with my old Harmony 520 remote. I am stuck at the point of trying to obtain/download the Connectivity.EZHex file from logitech. I have tried on two different Windows 10 machines on Chrome, IE & Firefox, and I have tried adding extensions in Chrome & Forefox to Ignore X-frame headers, but I have never been able to trigger the download. I can log in to the Harmony software but when I click next on "ensure the Harmony 520 can communicate..." I get a blank page that refreshes every few seconds, and no file downloads.
Is there anything else I need to do to get the EZHex file?
Thanks for any assistance...
Hi, my remote is in Safe Mode, when i tried to update firmware i got this error:
concordance --write-firmware=C:\Users\39339\Desktop\firmware\firmware_ultimo.EZUp
Concordance 1.5
Copyright 2007 Kevin Timmerman and Phil Dibowitz
This software is distributed under the GPLv3.
Requesting identity: 100% done
Initializing update: 0% Failed to upload firmware: Unknown error
Failed with error 1
Someone can help me?
Thank you in advence.
Best regards
Emiliano
Hello
the installer of the 1.5 version cannot run on windows look like the file is corrupted/incomplet.
once downloaded the file does not show the setup icon like the previous version installation file.
Then when trying to run it with admin right we end with an error cannot found file "file_path"\concordance-1.5-installer.exe
And the setup does not start.
If you can upload again the file to correct the issue.
Thanks
Hi
The easyzapper link has no login button anymore. But the logitech harmony java app seems to still work. Is it possible to leverage that to download the blob?
Thanks
Hey,
Title says it all. I am not sure when they decided to but as you can see here they are basically forcing all users to use the software either via the desktop of via an 'app'
Maybe we can hack something together if we can be bothered to reverse the software but to be honest I am starting to think that it is more effort than it is worth.
What ye think? Is this the end for Linux support for Harmony remotes?
Hey,
It seems http://members.harmonyremote.com/EasyZapper/ is now broken. I get the first page, but clicking on "Next" lead to a 404 error. Fortunately, I was able to bypass it with http://members.harmonyremote.com/EasyZapper/New/ProcLogin/Start.asp?BrowserIsChecked=True.
I bought a Harmony 665 a few days ago to replace my failing Harmony 350 from a couple years ago. I set it up on my MacBook Pro, but I ran into a problem - it turns out that the version of the Harmony software on my MacBook is too old for this remote. My MacBook is from 2011 and it can only go as far as macOS 10.13 (High Sierra), but the new Harmony software needs macOS Catalina (10.15) or later.
The version of the Harmony software on my MacBook was able to set up the remote fairly well, but with one glaring omission - volume controls. Towards the beginning of the setup process, it should have asked me which device should be used for volume control (i.e. TV, receiver), but it didn't. I looked into the matter and there's supposed to be another way to go about it, but that didn't work either.
I much prefer Linux and Congruity. Unfortunately, Congruity is missing a couple things, so I sometimes use Logitech's software.
I tried fixing this volume issue in Congruity, but no luck.
Hi, is there something I could try to test libconcordance von Harmony 950?
concordance -v -i
Concordance 1.2
Copyright 2007 Kevin Timmerman and Phil Dibowitz
This software is distributed under the GPLv3.
Requesting identity: 100% done
Model: Unknown Unknown
Skin: 112
Firmware Version: 4.11
Firmware Type: 0
Hardware Version: 1.0.0
External Flash: 512 KiB - FF:12 25F040
Architecture: 17
Protocol: 9
Manufacturer: Logitech
Product: Harmony Remote
IRL, ORL, FRL: 0, 0, 0
USB VID: 046D
USB PID: C12B
USB Ver: 1112
Serial Number: <>
Config Flash Used: 0% (0 of 512 KiB)
Success!
this is all I got running so far.
Hi:
I've used the Concordance and Congruity apps for several years to reconfigure my Logitech Harmony One remote control on the Members.HarmonyRemote.com site, but I'm unable to log in to their new site (https://setup.myharmony.com/).
I believe that the problem is that I haven't configured Firefox to report its capabilities properly (although it seems straightforward enough, and I've done it for other sites).
I believe I have the most updated versions of Concordance, Congruity, and Firefox, and am running on a regularly updated version of Ubuntu 16.04.
Can you tell me how exactly I can use Logitech's newest site (or even if its possible) as I added another remote (650) that can't be updated with the "legacy" site?
Thanks in advance.
This is migrated from https://sourceforge.net/p/concordance/bugs/41/
Downstream reported a segfault. Here's a exerpt from the stacktrace:
Thread 1 (Thread 0x7fbd89593700 (LWP 8786)):
#0 op_cancel_transfer (itransfer=0x7fbd6c000038) at os/linux_usbfs.c:2166
tpriv = 0x7fc27c0417d8
transfer = 0x7fbd6c000098
__FUNCTION__ = "op_cancel_transfer"
#1 0x0000003dd0808ab6 in libusb_cancel_transfer (transfer=0x7fbd6c000098) at io.c:1494
itransfer = 0x7fbd6c000038
r = <optimized out>
__FUNCTION__ = "libusb_cancel_transfer"
#2 0x00007fbd8d7c4471 in hid_close (dev=0x7fbd6c004260) at hid.c:1155
No locals.
#3 0x00007fbd8dbe8e39 in deinit_concord () from /lib64/libconcord.so.3
No symbol table info available.
#4 0x00007fbd8dbe8fc8 in reset_remote () from /lib64/libconcord.so.3
No symbol table info available.
#5 0x00007fbd8dbeb3a4 in update_configuration () from /lib64/libconcord.so.3
No symbol table info available.
#6 0x0000003db8005d8c in ffi_call_unix64 () at ../src/x86/unix64.S:76
No locals.
#7 0x0000003db80056bc in ffi_call (cif=cif@entry=0x7fbd895926b0, fn=fn@entry=0x7fbd8dbeb2c0 <update_configuration>, rvalue=rvalue@entry=0x7fbd895925c0, avalue=avalue@entry=0x7fbd89592590) at ../src/x86/ffi64.c:522
classes = {X86_64_INTEGERSI_CLASS, 32701, 2304320960, 32701}
stack = 0x7fbd895923a0 "\005"
argp = 0x7fbd89592450 "\n"
arg_types = <optimized out>
gprcount = 3
ssecount = <optimized out>
ngpr = 1
nsse = 0
i = <optimized out>
avn = <optimized out>
ret_in_memory = <optimized out>
reg_args = 0x7fbd895923a0
#8 0x00007fbd9000ac8b in _call_function_pointer (argcount=3, resmem=0x7fbd895925c0, restype=<optimized out>, atypes=<optimized out>, avalues=0x7fbd89592590, pProc=0x7fbd8dbeb2c0 <update_configuration>, flags=4353) at /usr/src/debug/Python-2.7.5/Modules/_ctypes/callproc.c:832
error_object = 0x0
cc = 2
_save = 0x1c00750
space = 0x53dfb40790adf700
cif = {abi = FFI_UNIX64, nargs = 3, arg_types = 0x7fbd89592560, rtype = 0xdb39e0, bytes = 0, flags = 10}
#9 _ctypes_callproc (pProc=pProc@entry=0x7fbd8dbeb2c0 <update_configuration>, argtuple=argtuple@entry=0xfaf910, flags=4353, argtypes=argtypes@entry=0x18f0af0, restype=0xdb34f0, checker=0x0) at /usr/src/debug/Python-2.7.5/Modules/_ctypes/callproc.c:1179
i = <optimized out>
n = <optimized out>
argcount = <optimized out>
argtype_count = <optimized out>
resbuf = <optimized out>
args = 0x7fbd895925e0
pa = <optimized out>
atypes = <optimized out>
rtype = <optimized out>
avalues = <optimized out>
retval = 0x0
#10 0x00007fbd90004a85 in PyCFuncPtr_call (self=<optimized out>, inargs=<optimized out>, kwds=<optimized out>) at /usr/src/debug/Python-2.7.5/Modules/_ctypes/_ctypes.c:3929
restype = <optimized out>
converters = <optimized out>
checker = <optimized out>
argtypes = <optimized out>
dict = <optimized out>
result = <optimized out>
errcheck = <optimized out>
pProc = <optimized out>
inoutmask = 0
outmask = 0
numretvals = 0
#11 0x0000003ddbe4a0d3 in PyObject_Call () from /lib64/libpython2.7.so.1.0
No symbol table info available.
#12 0x0000003ddbede37c in PyEval_EvalFrameEx () from /lib64/libpython2.7.so.1.0
No symbol table info available.
#13 0x0000003ddbee0980 in PyEval_EvalFrameEx () from /lib64/libpython2.7.so.1.0
No symbol table info available.
#14 0x0000003ddbee21dd in PyEval_EvalCodeEx () from /lib64/libpython2.7.so.1.0
No symbol table info available.
#15 0x0000003ddbe6f0d8 in ?? () from /lib64/libpython2.7.so.1.0
No symbol table info available.
#16 0x0000003ddbe4a0d3 in PyObject_Call () from /lib64/libpython2.7.so.1.0
No symbol table info available.
#17 0x0000003ddbe590c5 in ?? () from /lib64/libpython2.7.so.1.0
No symbol table info available.
#18 0x0000003ddbe4a0d3 in PyObject_Call () from /lib64/libpython2.7.so.1.0
No symbol table info available.
#19 0x0000003ddbedc027 in PyEval_CallObjectWithKeywords () from /lib64/libpython2.7.so.1.0
No symbol table info available.
#20 0x0000003ddbf10822 in ?? () from /lib64/libpython2.7.so.1.0
No symbol table info available.
#21 0x0000003db5807ee5 in start_thread (arg=0x7fbd89593700) at pthread_create.c:309
__res = <optimized out>
pd = 0x7fbd89593700
now = <optimized out>
unwind_buf = {cancel_jmp_buf = {{jmp_buf = {140452029871872, 3369074863727771819, 0, 0, 140452029872576, 140452029871872, -3334272243924402005, 3367057263870804139}, mask_was_saved = 0}}, priv = {pad = {0x0, 0x0, 0x0, 0x0}, data = {prev = 0x0, cleanup = 0x0, canceltype = 0}}}
not_first_call = <optimized out>
pagesize_m1 = <optimized out>
sp = <optimized out>
freesize = <optimized out>
#22 0x0000003db50f4b8d in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:111
The full stacktrace is at https://bugzilla.redhat.com/attachment.cgi?id=956472
The 1.3 Windows installer built last year doesn't install a working version. I see this pull #19 was merged in that fixes the problem, but a new release has not been released since then. I downloaded the 1.3a installer linked from here https://sourceforge.net/p/concordance/mailman/message/36475537/.
Can we get a new release?
Hello,
congruity used to work with no problem, but today, when I tried to update the configuration on my remote, I download Connectivity.EZHex, then run congruity on it with no apparent problem, but the harmonyremote.com website seem to not register the fact that the connection with the remote was correct.
If I test it with concordance I've:
% concordance -t Connectivity.EZHex
Concordance 1.3
Copyright 2007 Kevin Timmerman and Phil Dibowitz
This software is distributed under the GPLv3.
Requesting identity: 100% done
Contacting website: 100% done
Success!
But the harmonyremote.com website is still waiting for something.
I did all this on a debian machine (sid, with Concordance 1.3 and congruity version 20)
Thanks.
I have a couple old Harmony Links sitting around that are currently useless. Is it possible to use this to get those to work in any way?
Over the next 12 weeks, jobs using the macos-latest runner label will migrate from macOS 12 (Monterey) to macOS 14 (Sonoma)
Additionally, per the Current List of Images (https://github.com/actions/runner-images), macos-latest
is pointing to macos-14
which is arm64, not x64.
If I run ci-macos.yml
with runs-on: macos-13
(or 12) instead of runs-on: macos-latest
it works, which is the quick fix.
But, if I run it on macos-latest
aka macos-14
:
First it complains that libtool
is missing (ref) and when pip3 installs build it refuses to install the package due to it being an "externally-managed-environment" (ref). OK, so I work around it with the following:
- name: Install dependencies
run: |
brew install autoconf automake hidapi libzip libtool
pip3 install --break-system-packages build
But now we get the following when it's time to build:
checking for hidapi/hidapi.h... no
checking for hid_init in -lhidapi... no
configure: error: libhidapi is missing!
And it didn't throw any error when installing hidapi earlier:
==> Pouring hidapi--0.14.0.arm64_sonoma.bottle.tar.gz
๐บ /opt/homebrew/Cellar/hidapi/0.14.0: 19 files, 191.3KB
I have attached logs from the bad runs and a good run for reference.
1-logs_23416837081 Externally Managed Error.zip
2-logs_23417917674 libtool Missing.zip
3-logs_23418156127 libhidapi Missing.zip
logs_23419707015 GOOD OSX 12 run.zip
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.