This is a WIP project. Here you can find: -all the 3d printable parts as STL; -all the non 3d printable parts; -the PCB eagle files; -the arduino firmware; -the chitubox profiles; -the Android APP beta. Note: the current app stores the PNGs in the app directly, so you must put all your layers in the RES\drawables folder manually, then compile. I plan to implement the ability to select files from a folder from the App, but at the moment, all the LumiBee development (hardware, software, firmware, app and all the testing) is done by ONE single person (me) as a side project, for free. So feel free to contribute.

To do: -complete BOM -assembly instructions -how to use the screen luminosity tester -how to use - guide -how to use the app In the next days this guide wil be update so if you do not find some info, just write me.

A 3D viewable model of the assembly is available here: https://sketchfab.com/3d-models/lumibee-43fde758bdf04565baee1a75a64f292f

You can contribute to this project with a donation to support it if you like it, with a paypal donation at [email protected]