[Issue]: Jellyfin plays particularly quietly，whether consider to enhance the sound in the future? about jellyfin HOT 12 OPEN

Hi, it seems like your issue report has the following item(s) that need to be addressed:

• You have not filled in the environment completely.

This is an automated message, currently under testing. Please file an issue here if you encounter any problems.

from jellyfin.

Can you go to settings -> playback and change the Maximum Allowed Audio Channels to stereo, scroll down, click save, and then try again?

from jellyfin.

Can you go to settings -> playback and change the Maximum Allowed Audio Channels to stereo, scroll down, click save, and then try again?

thanks，I have tried but it seem did not have any different

from jellyfin.

Can you show a screenshot of playback info after you changed that?

from jellyfin.

Can you show a screenshot of playback info after you changed that?

from jellyfin.

For JMP, I think you need to go to the client settings and change audio channels to stereo there:

from jellyfin.

Also, you may want to disable this:

from jellyfin.

对于JMP，我认为您需要转到客户端设置并在那里将音频通道更改为立体声：

The main thing is that the vocals are too quiet, and I had to turn the volume up to 100%, which is completely different from plotplayer playback

from jellyfin.

I thought I had noticed a week or two ago, around one the 10.9 updates that the volume on a series I was watching was quieter than it had been - I have to raise my PC volume much higher than normal to hear the show now. Did something change in terms of the volume level that should be produced under any of the 10.9 updates?

from jellyfin.

I’ve also been noticing that I have to turn my sound system up much higher than before to get the volume to an acceptable place. This is on a Roku Ultra playing through a Denon 5.1 surround system playing both direct Dolby Digital surround mixes and stereo AAC.

I don’t really have a good memory for what baseline volume levels were before on Web or JMP otherwise I’d test that too.

from jellyfin.

I’ve also been noticing that I have to turn my sound system up much higher than before to get the volume to an acceptable place. This is on a Roku Ultra playing through a Denon 5.1 surround system playing both direct Dolby Digital surround mixes and stereo AAC.

I don’t really have a good memory for what baseline volume levels were before on Web or JMP otherwise I’d test that too.

My experience is mainly in JMP where I can say for sure that I’ve never had to have my windows volume over 60 to hear shows, and all other system sound is overly loud (normally keep it around 40).

from jellyfin.

Yes, my usual volume on the Denon is 50 from the Roku, but now I have to turn it up to 60 for Jellyfin.

from jellyfin.