A git repository for lolMiner release versions

• Downloads releases : https://github.com/Lolliedieb/lolMiner-releases/releases
• Helpful information in : https://github.com/Lolliedieb/lolMiner-releases/wiki
• Telegram Group : https://t.me/lolMiner
• Discord Group : https://discord.gg/jvfRvK5wTv
• Youtube Channel : https://www.youtube.com/c/lolMinerSupport

To see some basic configuration examples, see here: https://github.com/Lolliedieb/lolMiner-releases/wiki/lolMiner-Basic-usage-(English)

Changes

• Fishhash: Significantly improved speed on AMD RX 470 - RX 590 series of gpus (by 30%), significantly improved speed on Nvidia CMP 170HX (by 8-9%)
• Fishhash: Implemented new DAG build procedure for Nvidia Turing and up gpus, that will build a valid DAG even on higher memory OC. This significantly reduces the number of defect shares in this situation.
• Pyrin: Improved Pyrin performance on Nvidia Turing and newer gpus by about 2%
• Ton / Gram: Improved performance on Nvidia Turing and newer gpus by about 1-2%
• Improved performance of Fishhash + Pyrin dual mining on Nvidia Turing and newer gpus by about +10% on the Pyrin side
• Improved performance of Fishhash + Alephium dual mining on Nvidia Ampere and newer gpus by about -2% speed on Fishhash side, but +10% on Alephium side with auto tune, about +5% on Alephium side at same Fishhash speed with manual tuning
• Added experimental support for Fishash + Gram / Ton dual mining for AMD Vega and VII GPUs. Might require manual setting of dual tuning ratio.
• The Ton job interface can now connect to pools or bridges using Ton mode 5 with http, so not enforcing https.
• Removed Blake3-Ironfish from visible algorithms. --algo IRONFISH will now redirect to FISHHASH.

Fixes

• Fixed a bug causing the display of defect shares when mining Ton / Gram with very high difficulty
• Fixed missing of Ton / Gram mining on AMD Tonga, AMD Fiji and RX 460 (Baffin) series of GPU. Was accidentally removed in a previous release.

Known issues:

• CMP cards might crash or display faulty device statistics when trying to set offset or memory lock clock settings via lolMiner. Please use your operating system functions to do so.

Changes

• Added support for FishHash including dual mining codes. Use -a FISHHASH to mine it. Fork for Ironfish will be April 2nd, 2024
• Significantly increased Ton / Gram mining performance on all supported AMD GPUs.
• Removed old Fishhash testing codes.
• lolMiner will now accept --algo to be put in multiple times. The last occurrence will be the selected algorithm.

Fixes

• Fixed a bug causing high amount of pool rejected shares with AMD cards and Gram mining

Driver compatibility for Fishhash and Ton (Gram)

Changes

• Significantly improved Gram hashrate on AMD RX 5000 and higher cards by almost 10%
• Added support for mining the Fishhash mainnet. New parameter -a FISHHASH. This will automatically use the new Ironfish stratum format that is mandatory after the fork. Supported GPUs: Nvidia GTX 1000 series and newer, AMD RX 5000 series and new. Supported dual mining options with Alephium (ALEPHDUAL), Gram (TONDUAL) and Radiant (RXDDUAL).
• Removed old Fishhash testing codes.

Fixes

• Fixed a bug causing high amount of pool rejected shares with AMD cards and Gram mining

Missing features

• The dual mining codes of Fishhash and Ethash B3 with Karlsen and Pyrin can be buggy at the moment.
• The Fishhash codes for AMD RX 400 / 500 and Vega generation cards are missing at the moment
• The Gram codes for Intel GPUs as well as AMD RX 400 / 500 and Vega and ADA generation cards are missing at the moment, for ADA please use previous version 1.84

Changes

• Improved Ton / Gram mining performance by 15-18% on AMD RDNA 1-3 and NVIDIA Pascal and newer GPUs
• Added EthashB3 + Ton dual mining via --dualmode TONDUAL
• Added support to mine Gram on gramcoin.org - the https endpoint https://api-pool.gramcoin.org will be detected automatically, but the mode also can be selected manually by using --ton-mode 5

Fixes

• Fixed a bug causing Ton / Gram mining not to work on Cuda 11 drivers
• Fixed a bug causing Ton / Gram mining to not work on newer AMD drivers

Changes

• Due to popular demand added back codes for mining TON / GRAM. Use -a TON or -a GRAM to mine it.
• Ton / Gram pool connector now detects pools lolminer.ton.ninja and gram.hashrate.to correctly with --ton-mode 6 and https://ninja.tonlens.com with --ton-mode 4 (fixed in this build, did not work with old versions of the miner)
• Added Ton support for Nvidia ADA and AMD RDNA3 generation of GPUs

Changes

• Improved Heavyhash-Pyrin performance on GTX16 cards by about 25-30%, improved Heavyhash-Pyrin performance on GTX 10 series cards by about 10%.
• Improved energy efficiency of Heavyhash-Karlsen mining on GTX 16 series cards. Also slightly improved performance by about 1.5%.

Fixes

• Fixed a bug causing ETH / ETC / Ubiq mining to sometimes crash with a segfault (introduced in 1.82a)
• Fixed the "submit not found" bug on Karlsen & Pyrin mining
• Fixed a bug causing too many rejected shares on Karlsen and Pyring when on unmineable pool.
• Fixed reading memory temperatures on AMD RTX 4000 cards
• Fixed a bug causing Beam mining to not work on AMD RX 5500 with 8G

Changes

• Added support to mine Heavyhash-Pyrin on AMD RX Fury, RX 400, RX 500 and Vega / VII series
• Increased Heavyhash-Pyrin performance of Nvidia GTX 16 series GPUs by over 100%
• Increased Heavyhash-Pyrin performance of AMD RX 5500 series and AMD 7000 series GPUs by over 60%
• Increased Heavyhash-Karlsen performance of AMD RX 5500 series and AMD 7000 series GPUs by over 15%
• Increased Heavyhash-Pyrin performance of Nvidia Pascal GPUs by about 6+%, Slightly increased Heavyhash-Karlsen performance on Nvidia Pascal series by 1.3%
• Slightly improved performance of Heavyhash-Pyrin on Nvidia RTX (by up to 1.5%) and AMD RDNA 2 cards (by 3% at improved efficiency), minor improvements to the Heavyhash-Karlsen performance as well
• Added support to read memory temperatures on Nvidia drivers 545 and upwards (for those cards that support it)

Fixes

• Fixed a bug causing dual mining ETHW, ETC, Ubiq + Alephium being broken from 1.77
• Fixed a bug causing Pyrin mining not starting on Nvidia GPUs without --no-cl parameter from 1.81

Changes

• Added support to mine Heavyhash-Pyrin (-a PYRIN) on Nvidia Turing and newer / AMD Navi and newer. Fee is 1%. Note: requires a Pyrin stratum pool or adjusted stratum bridge. Please keep an eye open on those.
• Added support to dual mine EthashB3 and Heavyhash-Pyrin on Nvidia Turing and newer / AMD Navi and newer. Fee is 1% + 1%
• Added support to dual mine EthashB3 and Heavyhash-Karlsen on AMD RX 5000 series.

Changes

• Added Karlsen support for AMD Vega and Radeon VII on PAL drivers (current Windows, older Linux). Note: For ideal performance and future developments on this mining software we strongly recommend moving to a Linux platform with modern drivers if you own this card, since not all future algorithms will be ported this way.
• Massively improved Karlsen mining performance on AMD RX 400, AMD RX 500 (both +45%) and AMD Vega 56 / 64 (both +92%).
• Improved Karlsen mining performance on AMD Radeon VII and AMD RX 5000 GPUs (+12%).

Note: All AMD Vega and VII cards still need a driver that reports its Driver version as 3261.0 (HSA1.1,LC) or higher. As far as we know all mining operation systems offer a driver packed that is new enough - but it might be this is the latest.

Fixes

• Improved / Fixed hashrate regression in 1.78a / 1.79 of Nvidia GPUs in Windows on Alephium, EthashB3, Ironfish, Karlsen, Nexa and Radiant.
• Fixes Karlsen performance regression on GTX 16xx GPUs from 1.78 to 1.79.
• Fixed an issue causing RX 5000 cards sometimes to not work in Windows on recently added algorithms

Changes

• Added Karlsen support for AMD RX 400, RX 500, RX Vega*, Radeon VII* and RX 5000 generation GPUs. This is for the stand alone solver only and not yet for RTH+KLS dual mining. * RX Vega and Radeon VII requiereing an OpenCL driver with version number 3261.0 or higher.
• Slightly improved Karlsen solvers for Nvidia GPUs by approximately 0.5 (Ampere) to 3 % (Pascal cards)

Fixes

• Fixed a bug causing FISHHASH-TESTNET solver not submitting shares to testnet server
• Fixed a bug causing 1.78 added dual mining codes to not start up on some Linux systems
• Fixed a bug causing multiple algorithms (RTH, NEXA, Radiant) not to start up on some systems in Windows
• Fixed a bug causing KLS solver to sometimes segmentation fault in Linux
• Fixed a bug causing AMD RDNA2 & RDNA3 cards to have low poolside Karlsen hashrate on older drivers. Hint: please update to drivers with OpenCL version above 3261.0 to get best possible performance out of your cards, cause the fix did cost a bit of raw speed.

Notes & Tips:

• If you see the miner re-tunes the dualmode very often, because of clock change, try to spot a good factor and fix it via --dualfactor
• The IRONDUAL dual mode does cost a lot of RETH performance on Nvidia cards. Therefore often the automatic tuning tunes it to 0. Therefore we advice to set a good for you --dualfactor on your own.

Changes

• Added support for Beam Hash III on Nvidia RTX 4000 and AMD RX 7000 generation GPUs
• Added support for Heavyhash-Karlsen for Nvidia Pascal and newer and AMD RX 6000 and newer GPUs. Use --algorithm KARLSEN to mine it, fee is 1%
• Added multiple dual mining options for EthashB3 algorithm (Rethereum). The algorithm can now be used with --dualmode to be set to ALEPHDUAL (Blake3 - Alephium), FISHDUAL (Blake3 - Ironfish), RXDDUAL (Sha512 / 256D, Radiant) or KARLSENDUAL (HeavyHash-Karlsen). Fee rule for dual mining: its the same as with the individual algorithms, so if EthB3 takes 1% and Radiant mining 0.75 as individual algorithms, you pay 1% on the EthB3 portion and 0.75% on the Radiant portion when dual mining. Usage is the same as described here for Ethash.
• The algorithms ALEPH, ETHASHB3, IRONFISH, KARLSEN, NEXA and RADIANT now support splitting the hashrate analog to the options described here. Use --dualmode SPLIT-X to put X% of the hashrate to the 2nd connection given by --dualuser and --dualpool
• When using split mining, the hashrate will now be displayed as one solver as well in stats as in the API. This gives a more consistent representation.
• Reduced stale shares on algorithms ALEPH, ETHASHB3, IRONFISH, NEXA and RADIANT.
• Windows: Updated GUI tool
• Added support for the FishHash algorithm (Future Ironfish PoW) for testing purposes. Use --algorithm FISHHASH-TEST to connect to a current Ironfish pool and run the shares just against the build in CPU verify. In this mode the difficulty is 1/256 of what the usual Blake3 difficulty would be. Use --algoriithm FISHHASH-TESTNET to connect to a real testnet pool and mine there including submitted shares.

Fixes

• Fixed a bug causing BEAM mining to crash on newer cuda versions.

• Fixed a bug causing multiple algorithms to show hashrate in wrong place of statistics when running two algorithms on different GPUs.

• Fixed a bug with Rethereum mining not working on Cuda 11 drivers.

  Examples DUAL RTH: Code ALPH: --dualmode ALEPHDUAL --dualpool your_pool_ALPH --dualuser your_WALLET_ALPH.%WORKER_NAME% your_OC

Code IRON: (Only RTH) --dualmode FISHDUAL --dualpool your_pool_IRON --dualuser your_WALLET_IRON.%WORKER_NAME% your_OC

Code KLS : (Only RTH) --dualmode KARLSENDUAL --dualpool your_pool_KLS --dualuser your_WALLET_KLS.%WORKER_NAME% your_OC

Code RXD: (Only RTH) --dualmode RXDDUAL --dualpool your_pool_RXD --dualuser your_WALLET_RXD.%WORKER_NAME% your_OC

Changes

• Added support to mine SHA512_256D used for Radiant (RXD). Use -a RADIANT to mine it, fee is 0.75%. Supported GPUs: AMD RX 470 - 590, Vega (requires rocm drivers) and all Navi and newer, Nvidia Pascal and newer.
• Added support to mine Ethash B3 used for Rethereum (RETH). Use -a ETHASHB3 to mine it, fee is 1.0%. Supported GPUs: AMD Navi and newer, Nvidia Pascal and newer.
• Added ethash dag correction tables for epochs 13-29 (PowBlocks, XPB), 112-129 (OCTA) and 608 - 619 (ETHW)

Fixes

• Fixed a bug in Ethash solvers for AMD Navi and newer and Nvidia GPUs that caused a crash when mining at some low epochs. This fix will allow to mine PowBlocks (XPB).
• Fixed a bug introduced in 1.76a causing CTXC mining to not work.

Changes

• Improved performance of Blake3-Alephium mining on Nvidia Turing and newer cards by 15-18%.
• Improved performance of Blake3-Ironfish mining on Nvidia Turing and newer cards by 9-11%.
• Slightly improved performance of Blake3-Ironfish mining on AMD cards by ~0.8%.
• Slightly improved performance of Nexa mining on Nvidia Turing and newer cards by ~0.6%.
• Updated dag repair tables for OctaSpace, ETHW & ETC mining to cover current epochs
• Added option --screen to enable a special mining mode in case a GPU is connected to a screen to prevent shuttering. The value -1 activates this mode for all cards, any value above or equal 0 will activate this mode for the GPU with index equal to the provided number. E.g. --screen 0 will active it for the first card detected by the miner. Note: it is in the nature of this option to cost some performance when used. At the moment this option is available for Ethash (AMD cards), Kaspa (Nvidia), Nexa, Alephium and Ironfish solvers.

Fixes

• Fixed a bug with Alephium mining on RTX4090 producing duplicated shares.
• Fixed a bug making some Nvidia only rigs to need --no-cl parameter to mine Ironfish.
• Fixed a bug causing Nvidia Ampere-based CMP HX GPUS & Nvidia Ax000 series not to mine blake3 algorithms.
• Fixed a bug rarely causing defect shares on AMD cards when mining Ironfish.

Changes

• Improved Ironfish mining speed by 4-5% on all supported GPUs.
• Added support to mine Alephium on AMD GCN3 (RX 400, Rx500) and newer GPUs
• Added support to mine Ironfish on AMD GCN3 gpus
• Renamed Blake3-Ironfish to Blake3-Iron to make it identical to competing miner softwares and better detectable by some mining OS

• Fixed a bug causing to little shares submitted when mining Alephium on Nvidia GPUs
• Fixed a bug causing high stale and defect share counts when mining Ironfish on AMD GPUs
• Fixed a bug causing AMD RX 7900 series GPUs not starting up Ironfish mining
• Fixed a bug causing only defect shares on Ironfish mining when a pool did not zero the Grafitti part of the block header (e.g. ezil pool)

Changes

• Added support for Ironfish mining (use -a IRONFISH for putting out your rod) for Nvidia Pascal and newer and AMD Vega and newer GPUs. (AMD Vega require rocm based drivers). Fee is 0.75%. This version uses the pool protocol extension of TeamRedMiner and should be compatible to all pools supporting their protocol as well as their solo mining protocol fork of Ironfish node.
• Slight improved performance and reduction of stales for Alephium mining on Nvidias.

Changes

• Massively improved Karlsen mining performance on AMD RX 400, AMD RX 500 (both +45%) and AMD Vega 56 / 64 (both +92%).
• Improved Karlsen mining performance on AMD Radeon VII and AMD RX 5000 GPUs (+12%).

Note: All AMD Vega and VII cards still need a driver that reports its Driver version as 3261.0 (HSA1.1,LC) or higher. As far as we know all mining operation systems offer a driver packed that is new enough - but it might be this is the latest.

Fixes

• Improved / Fixed hashrate regression in 1.78a / 1.79 of Nvidia GPUs in Windows on Alephium, EthashB3, Ironfish, Karlsen, Nexa and Radiant.
• Fixes Karlsen performance regression on GTX 16xx GPUs from 1.78 to 1.79.

Changes

Improved Kaspa codes:

• Improved performance of Kaspa on Nvidia Turing and newer by 0.2-1% depending on model
• Improved efficiency of Kaspa mining on Nvidia Turing and newer by 2-3% depending on model
• Halved number of stale shares on Kaspa on Nvidia Turing and newer

Improved Nexa codes:

• Improved performance of Nexa on Nvidia Turing and newer by 2-5% depending on model

• Improved performance of Nexa on AMD cards by 0.5 - 1.5% depending on model

• All GPUs on Nexa and Nvidia GPUs on Kaspa now do a clean shutdown once hitting ctrl+c - that should prevent issues and crashing when exiting / resetting oc

• Enabling reading of GPU junction temperature ( and memory temperature on Nvidia GDDR6x GPUs) on Nvidia 530 drivers or newer

• Windows: updated the oc gui with added AMD overclock functionality

Fixes

• Fixed a bug causing --tstart and --tstop not working in Nexa solvers
• Fixed a bug causing the miner not to pause on a connection loss in Nexa solvers

Changes

• Improved Nexa mining performance by 4% on AMD Vega, Navi and Big Navi gpus and by 2-3% on Nvidia Turing and Ampere gpus.

Changes

• Added support for mining Kaspa on AMD RX Vega using rocm based drivers (amdgpu-pro 20.50 and newer)
• Added support for mining Nexa on AMD RX 400 & 500 series gpus
• Improved Nexa mining performance on AMD Vega based gpuss by 45% (Vega 56 & Vega 64) and up to 60% on Radeon VII, Note: needs still drivers that are HSA based as very new amdgpu-pro versions or rocm drivers.
• Improved Nexa mining performance on all other supported AMD & Nvidia Turing and Ampere gpus by 1.5 - 3% depending on model

Fixes

• fixed a bug causing Vega GPUs not starting to mine Nexa on systems with xnack feature enabled.

Changes

• Improved Nexa mining performance by 6 - 8% on all supported GPUs (except AMD Vega / VII).
• Improved power efficiency of Nexa mining.

Hint: Due to recent problems we advice to use the miner with --dns-over-https 0 when connecting to an auto-location pool. Else the pool mirror you receive might not be ideal for your location.

Changes

• Added Nexa support for AMD Vega / VII (1) and RDNA 1-3 GPUs (2)
• The parameter --keepfree can now be used to keep a certain amount of memory free on each GPU on Nexa mining. This might end up in allocating a smaller lookup table, so the GPU memory has space left for other workloads (3)
• The --keepfree parameter is now working for each GPU separately. Use a comma separated list of values if you want to assign different values for each GPU.
• Nexa mining will now allocate memory for each GPU sequentially and delay later cards startup slightly to help systems with small virtual memory.

Changes

• Significantly improved Nexa mining performance on supported GPUs (e.g. up to +25% on 8G Ampere GPUs)

Fixes

• Fixed a bug that can make the miner crash with error message "Authorization problem on all configured pools 1" during Nexa mining

Note The alternative Windows version uses a different mechanism to determine the available memory on a Windows system. On most 8G GPUs this will cause the miner to select a smaller dataset table that has only slightly above 2 G. Therefore the alternative version might be a good choice for systems with connected screens or for Nexa / Zil mining using the Zil switching app.

Changes

• Improved Nexa performance on Nvidia Turing based gpus by approximately 35%+.
• Improved Nexa performance on 8G Nvidia Ampere gpus by approximately 1.5% when memory is not locked and ~3% on locked memory (5000). 10G and higher gpus got an additional 5% performance increase.
• Improved Nexa performance on Nvidia Ada based gpus by approximately 25% on locked memory clock (5000) and about 8% on unlocked memory.
• Added Nexa echelon mining protocol to support pools using it, e.g. 137pool.org. The needed format will be automatically detected when connecting to a pool using it.
• Updated WebUI for Nexa mining and more pools to support.
• Windows: Updated GUI

Fixes

• Fixed a bug causing scattered defect shared on Nexa mining (all OS)
• Fixed a display bug when setting power limit on Nvidia GPUs saying the value is out of Range, although its fine. (all OS)
• Fixed a bug in Nexa mining of the miner creating only defects (Windows)
• Fixed a bug in Nexa mining of the miner crashing silently after a few minutes (Windows)

Note 1: Every code update - in particular when so massive as here - may require re-tuning your oc & uv settings for ideal results and stability.
Note 2: memory locking on Ada gpus is only recommended if the core clock is locked as well and not maxed out - on high core clock in combination with memory locked to 5000 the performance will struggle due to worse memory timings.

General note: The Nexa gpu codes are (and will be in foreseeable future) joint work with Iedoc from BzMiner. Miner fees will be evenly shared regardless of which of these two flavors of the code you prefer.

Changes

• Added support for mining Nexa on Nvidia Pascal or newer generation GPUs (1). Use --algo NEXA to mine it. Fee is 2%. Note: The pool protocol supported matches the one introduced by rplant pool. That said pools tested by this version are in alphabetical order: acc-pool.pw, rplant.xyz, vipor.net and woolypooly.com. That said this list is not exclusive and every other pool following this protocol should work. Note 2: This code is joint work with Iedoc from BzMiner and it is a refined version with approximately 20% higher speed then the code released in BzMiner v13.0.1. An updated version of BzMiner featuring the improvements of this kernel as well as the same fee level will be released soon.

(1) Primary focus in optimization were the low to medium range Nvidia Ampere GPUs. The performance of other generations may vary, but certainly improve the next versions.

Changes

• Improved Kaspa performance in ETC and ETHW dual mining by about 6-7% on AMD (Big) Navi GPUs and 10-12% on Nvidia Turing and Ampere, measured at the same Ethash speed. The actual improvement depends on the concretely selected dual factor. Re-tuning your setup is highly recommended.
• Improved Kaspa performance in Kaspa only mining mode by 0.6 to 1.2% on Nvidia GPUs and 0.4-0.5% on AMD (Big) Navi GPUs at approximately same power draw.
• Beta feature: Added experimental support for AMD RX7900 series. Supported algorithms: Et(c)hash, kHeavyHash and the corresponding dual mining.

Fixes

• Fixed some minor display bugs

Changes

• Improved Kaspa only mining performance. Speed increase is about 8-8.5% on Nvidia Pascal GPUs, 4.5-5% on Nvidia Turing and Ampere GPUs and 3-4% on AMD Navi and Big Navi GPUs
• Beta feature: added options to set core clock offset (--coff), memory clock offset (--moff), power limit (--pl) and a fixed fan speed (--fan) on common Nvidia GPUs. Required are admin privileges and Nvidia drivers 520 or higher! The syntax is the same as with --cclk and --mclk - if a single value is given then it will be applied to all compatible GPUs, else a coma separated list of values can be given using a * character to skip over GPUs. (1)
• Added a new parameter --no-oc-reset to turn off the reset of overclock settings when ending the miner.
• Windows: Added a beta gui to generate overclock settings strings / .bat files for the miner. Also the tool can apply the chosen settings directly.

(1) Note: No responsibility taken for the values set. Please use with care. If your mining os had build in functions to set these settings we recommend using them instead of the miner settings.

Fixes

• Fixing a bug with ETHV1 (nicehash) stratum mode that may cause the worker name to be appended twice when it was given by --user . (the use of --worker did not have this issue).

Changes

• Improved the Kaspa only mining performance on Nvidia Turing, Ampere and Ada GPUs by about 3.5%. (1)
• Significantly improved the Kaspa only mining energy efficiency on Nvidia Turing, Ampere and Ada GPUs by 7-11% depending on the actual model.
• Values given to --dualfactor parameter will now be value checked and rounded / capped to working values.

(1) Can be higher in case the card was power limited before.

Fixes

• Fixed a bug causing the miner to show a crash message when lolMiner was ended via ctrl+c
• Fixed a bug causing lolMiner not to start Kaspa mining on Nvidia GPUs when the Nvidia OpenCL installation on the system is broken.

Changes

• Added basic support for Intel Arc Desktop GPUs on the following algorithms: ETC, ETC+KAS (1), Kaspa, Flux, Ergo, Beam (2) & Equihash 144/5 (2). Fees are equal to Nvidia and AMD GPUs on the corresponding algorithms. Tested Intel OpenCL driver versions are 22.24.23453 and 22.32.23937.
• Added support for mining Alephium in non-dual mode for Nvidia Pascal GPUs and newer. Use --algo ALEPH to mine it. Fee is 0.75%.
• Slight performance improvement for Kaspa non-dual on Nvidia GPUs.
• Added Aeternity Cuckoo 29 & Grin Cuckatoo 32 kernels for RX 6600 and RX 6700 series GPUs.
• Updated web ui for supporting Intel GPUs, more pools and coins.
• --cclk for locking core clock and --mclk for locking memory clock now work for Nvidia Pascal and Turing GPUs (3).
• If --cclk or --mclk are used to lock clocks, these will now be reset on lolMiner exit.
• Added reading of junction temperature and memory temperature for Nvidia GPUs for drivers 515 or newer.
• Re-arranged nonce consumption for Kaspa to allow pools with 3 bytes extra-nonce without (too many) duplicate shares.
• Linux: Added reading of GPU power draw and core clock on Intel Arc GPUs.

(1) Only on the 8G+ Intel GPUs: A580, A750 and A770. (2) Beam and Equihash are experimental on Intel GPUs. Also see known issues when running multiple cards. (3) Needs admin / sudo privileges. Tested 460.93 driver and higher. --mclk should only be used to mine core intense coins like Kaspa or Aleph in order to reduce power draw by the memory. Recommended value in this case: 810.

Fixes

• Fixed a bug that may cause a segmentation fault on startup.
• Fixed a bug causing LHR detection to sometimes start on Nvidia 520 and newer drivers
• Fixed a bug causing --list-devices not to work.
• Fixed a bug causing DNS over HTTPs to fail often.
• Fixed a bug causing Intel GPUs not to be sorted by PCIE bus and address in device list.
• Fixed a bug causing rejected shares on Equihash not appearing in API (but they did in miner dashboard stats).
• Fixed a bug in web ui to sometimes not refreshing.

Known issues

• When running multiple Intel Arc GPUs on Beam or Equihash 144/5 the cards will slow down. This is likely due to a limitation of the Intel OpenCL implementation and the way lolMiner works with it. We hope to get this fixed in one of the upcoming versions.

Changes

• Slightly improved performance of Flux mining on Nvidia Ampere and Turing cards (by approx 1.5-2.5% compared to 1.60)
• Improved system memory footprint when mining Flux or Beam on Nvidia GPUs. This allows running the solvers on more then 8 GPUs with only 4G system memory.
• Speed exposed by API is now smoothed, so especially on all Equihash based algorithms the hashrate figures derived from API values will appear more smooth

Fixes

• Fixed a bug causing Flux mining on Nvidia Pascal GPUs not working
• Fixed a bug causing stale shares being counted as defect shares in API - and not correctly exposed in miner UI as well.

Changes

• Significantly improved performance on Flux for Nvidia Turing & Ampere and AMD RX 5000 based GPUs. The expected performance on Ampere and Navi GPUs is about 15-20% above common implementations. On Turing based GPUs the performance matches common codes, but is more energy efficient. Fee is 1.5% for the new codes.
• Equihash 125/4 (Flux), 144/5 and 192/7 stratum can now distinguish between stale shares and other rejected.

Fixes

• Smaller fixes in Kaspa stratum, removing the extra string lines when a share gets rejected and fixing a potential infinite loop that might consume CPU time.

Changes

• Significantly improved Kaspa performance and efficiency on Nvidia Turing and Ampere GPUs. Also the new codes are now working much better when GPUs are power limited.
• Slightly improved Kaspa performance and efficiency on AMD Navi and Big Navi GPUs
• Kaspa performance statistics should now be a bit more smooth

Changes

• Added Kaspa only mining mode for Nvidia Pascal and new and AMD Polaris, Navi and Big Navi. Use --algo KASPA to mine it. Fee is 0.75%.

Tuning advice: On Nvidia Turing and Ampere GPUs this algorithm works best when locking the core clock to desired value (higher gives more performance, lower reduces power draw). We recommend to not set the power limit. Also to save energy, the memory clock can be chosen rather low. On Linux you can use --mclk 810 (but when you change back to an other algorithm you might need to reset this or reboot the rig).

Note: If your OS does not list lolMiner supporting Kaspa only mining yet, use the configuration for TON mining (cause temporarily we will accept --algo TON to mine Kaspa.

Changes

• An other performance improvement of Flux mining on Ampere based GPUs (1.5 - 3.5% depending on model and clocks)

Fixes

• Fixed a bug causing some Ergo pools to disconnect the miner frequently (Introduced with 1.56 :/ )

Changes

• Major performance increase for Flux mining on Nvidia Ampere GPUs
• Major performance increase for Beam mining on Nvidia Ampere GPUs
• Mining Flux and Beam on all Nvidia GPUs now uses Cuda instead of OpenCL
• Slight performance improvements for Flux mining on AMD RX 500, RX 5000 and RX 6000 (about 0.2 it/s)
• Mining any Equihash based coin (Flux, BTG, Aion, ...) now supports extra nonce subscription via stratum (e.g. for better profit switching pool experience)
• Added option --no-cl to disable detection of OpenCL powered GPUs (fixes a crash on some rigs where the Nvidia OpenCL driver crashes - happens mostly when having a rig with many GPUs)

Fixes

• Disabled DAG checking for ETC mining on 4G AMD GPUs, because this was always failing (investigating to bring it back asap)
• Nvidia LHR cards will no longer run the LHR unlock when not mining Et(c)hash or Ergo - this will prevent them from crashing on some other algorithms.

Changes

• Significantly improved Flux mining performance on AMD RX 5000 (+10% on 5700) and AMD RX 6000 based GPUs (+15-22%)
• Mining Flux, Beam, Equihash 144/5 and Equihash 192/7 will now display the iteration/s (it / s) for easier OC tuning and the pool sol/s calculated from submitted and accepted shares.
• Flux mining can now be selected via --algo FLUX without needing to specify --pers.
• Enabling Equihash 144/5 and Equihash 192/7 will now also support --pers auto instead of capital --pers AUTO for enabling pool automatic selection.
• Added DAG check and repair function for Ethereum Classic mining up to epoch 300
• Added ETH / ETC + Kaspa code for Nvidia Pascal based GPUs.
• Added option to mix different Ethash style algorithms when using the fail-over pool function. To use this you now can use eth:, etc: and ubiq: as a prefix for your fail-over pool address to indicate this pool uses a different algorithm then the one configured initially. This will allow to automatically switch from Ethash to an Etchash pool when "the merge" happens as one can configure for normal Ethash mining and configure one of the fail-over pools as Etchash, so when the primary pool gets disconnected or rejects the authorization (these two are expected behavior for Eth pools after the merge), then the miner can switch to a fail-over e.g. configured to mine Etchash. See example files "mine_eth_backup_etc.sh" or "mine_eth_backup_etc.bat" on how to use it. Note: when using this feature with prefixes like tls:// or ssl://, then put the new prefix after the prefix for the communication layer. So tls://etc: is valid, while etc:tls:// is not.

Fixes

• Fixed a bug that might cause the miner to crash when an Ergo pool connection needs to reconnect.
• Fixed a bug that can cause random invalid shared when mining Kaspa on AMD GPUs.

Fixes

• Fixed a bug sometimes causing duplicate send shares in Kaspa dual mining.
• Fixed a bug "Received a defect stratum message: conversion of data to type "b" failed" on new Kaspa pools and the solo mining adapters.
• Fixed a bug causing --dualworker not to work right with Kaspa dual mining.

Changes

• Added Eth/Etc/Ubiq + Kaspa dual mining solver for AMD RX 400, 500, 5000 and 6000 series and Nvidia RTX 2000 / 3000 series. Use --dualmode KASPADUAL to select it. Fee is 1% + 0%.
• Slightly improved dual mining performance of Ethash + Alephium on AMD RX 5000 and RX 6000 series
• Slightly improved energy efficiency of Ethash on AMD RX 5000 and RX 6000 series
• Added new parameter --max-latency. If the pool share latency is above this value and failover pools are configured, the miner will terminate the connection and connect to the next failover pool (at the earliest after 10 shares on the active connection). This is repeated if necessary until a pool remains below the latency limit. The default value is 0, which disables the feature. In dual-mining, multiple values can be specified separated by a comma, where the first value is for the first algorithm and the second is for the second algorithm. If only one value is specified, it applies to all connections.

Known issues : The miner seems to crash on some Windows machines running ETC+Kas on 4G cards. We are not yet sure why, but we will investigate.

Changes

• New memory management for Ergo on Nvidia GPUs. Fixes the miner not working on current epoch on latest release and fixes the requirement to restart the miner on Ergo epoch change
• Added 2 more epochs on Ergo for 3G AMD GPUs. Note that a better management with automatic switch to zombie mode is planned in next version.
• Updated WebUI with a lot of fancy redesign :)
• Slight changes to LHR unlocker to improve the unlocker stability.
• Removed: 2G zombie modes for Ergo on AMD cards
• Removed: Support for mining Ton in single and dual mining modes. Note that existing dual mining configurations will automatically launch Eth / Etc / Ubiq only mode, so existing configurations will not be broken.

Fixes

• Fixed multiple issues that caused the miner not to properly reconnect when it took too many attempts.
• Added an internal stratum watchdog, that will restart the entire stratum stack internally, when not connected for a longer while.
• Fixed a potential segmentation fault at startup
• Fixed a segmentation fault when Alephium dual mining is requested, but the dual worker did not get authorized

Changes

• Windows: significantly improved the speed of Nvidia Ethash mining
• Extended working range of 100% LHR unlocker to 470 and 472 drivers. Note: please do not use the new 515.x drivers - on them the unlock currently does not work.
• New parameter for dualmining: --dualfactor (default: "auto"). (see Note below)

Fixes

• Linux: Fixed a bug causing the Zombie mode on 5G Pascal GPUs (1060 5G, P2000) not to work.
• Minor LHR unlocker stability improvements.

lolMiner has only 0.7% fee on Ethash, 1.5% on Autolykos V2 and only 1%+0% fee on dual mining. You will find no lower ones in the market with this feature set.

Changes

• 100% LHR unlock on LHR V1 and V2 GPUs. Unlock working on all supported algorithms including Ethash and dual Mining. Requires Nvidia driver versions 510.x (Linux) or 512.x (Windows) and sudo / administrator privileges!
• Added experimental LHR v3 unlock to ~90% (3050) and ~92% (3080 12G) (default enables) Use --lhrv3boost 0 to disable the mode and fall back to ~65% unlock (see notes below).
• If the pool connection gets lost on the dual mining algorithm, the miner will now stop the dual mining to save the energy and continues in Ethash only mode until the connection is re-established.
• Updated web gui

Fixes

• Fixed a bug in 1.49 causing Ergo mining not to start on Nvidia GPUs.

Notes

• The LHR unlock will start about 30 seconds after the miner did start, giving room for running the DAG generation with delayed OC.
• If any of the above requirements are not met, the miner will load the old 79% unlock function and print a fitting warning method with the statistics.
• The experimental mode for LHR V3 seems to sometimes have unstable when starting up with only a reboot solving it - but after a first successful start it is stable - therefore the option to turn it off if you are struggling to start it up too many times.
• When configuring the --lhrv3boost via json file, use "LHRV3BOOST" : 1 to set it.

Changes

• Improved performance of Nvidia LHR V2 cards in Ethash to 79 - 79.5% (86.5 - 87 % on RTX 3060 V1 and 460.39 driver). Note that dual mode codes remain unchanged.
• Added an experimental zombie mode for Nvidia Pascal generation 5GB cards, allowing them to continue mining Ethash after epoch 492 (in Linux)
• Reduced fee for LHR unlocker back to 0.7%. Now all Ethash solo codes have only 0.7% fee (again).
• LHR cards that have memory junction temperature sensors will automatically throttle LHR unlock by ~0.4 - 0.5% when hitting 106° C memory clock to prevent unneeded locks
• LHR calibration on startup now taking approx 2 minutes instead of 4.
• Extended crc table for Ethash up until epoch 550
• Changed default behavior for "." signs in wallet address when Ton or Aleph dual mining. These will now automatically separate the string at the given position, so the thing after a . is treated as worker name.

Fixes

• Fixed a bug that may cause TLS connections not cleanly reconnecting after a connection loss

Changes

• Implementing the new LHR scheme in Windows. Recommended driver: 512.15
• Slightly improved initial speed after startup on 510.x & 512.x drivers allowing to reach best performance faster
• Made the LHR unlocker more robust against small changes in work load. We still recommend to not put other load then mining during the calibration phase - after that is finished, the miner is more robust.
• Full hash rate cards will disable LHR detection latest one minute after --lhrwait has passed. This means that by default one minute after the DAG was created the cards now get "protected" from further detection.
• Added Nvidia core junction temperature reading
• Added color grades for temperatures in web api
• Change in configuration for making it more comfy: If the number of entries for --cclk, --mclk, --lhrtune or --maxdualimpact matches exactly the number of selected GPUs, the miner will now automatically skip over the inactive devices. E.g. --devices 1,2,4 --cclk 1050,1400,1500 now makes sense, while before --cclk ,1050,1400,,1500 was needed to skip over inactive devices.
• --lhrtune 0 is now semantically identical to --lhrtune off

Fixes

• Changed handling of user/wallet names containing one or multiple dots. This should fix issues with mining rig rentals and ezil pool. Note: some pool might not like appending your user name with a dot. If so and you get authorization rejected make sure you use --worker instead
• Fixed a bug causing LHR unlock not working when too many GPUs needed to perform DAG repair in Aleph dual mining (yea, that is a special case one ... )
• Fixed a bug causing RTX 3050 & RTX 3080 12GB to have extremely low Ethash performance when dual mining
• Fixed a bug causing dual mining hash rate on FHR cards not showing up during dual mine calibration in 1.47
• Fixed a bug causing --lhrtune off occasionally not to work in 1.47

Note: at the moment the release is Linux only, because testing the new scheme on Windows will take us some time. Be patient please :)

Changes

• lolMiner bringing you the fastest public Ethash LHR solver! 77.2 - 78.2% on GDDR6 and 76 - 77% on GDDR6X Nvidia Ampere cards! Exceptions: 86% on RTX 3060 v1 with driver 460.39 or older, 55-58% on RTX 3050 and RTX 3080 12G. Fee on the new scheme is 1%, other solvers are unchanged. Please read the important notes section below.
• Added support for LHR unlock in 470.103.01 and all 510.x drivers. In fact we highly recommend using these drivers, because it will give a more stable unlocker experience!
• the parameter --lhrtune now takes absolute % values to fix a certain percentage of unlocking. If chosen too high, lolMiner will reduce the value to the maximum possible. The value will be tied to keep regardless of the number of locks this implies. The default is "auto" in which the miner tries to balance the number of locks and re-calibrations with the speed to achieve, hash rate might change from time to time based on unlock quality heuristics.
• Cheaper locks: when unlocking the miner will continue mining at low speed to make the unlock procedure more cheap.
• Reduced Ton & Alephium fee in Eth+Ton / Ethash+Alephium dual mining to 0%. You will be only paying the 1% fee on Ethash in this dual mining. This also means: no more unsafe connections to Ton servers to collect fee in case you are in a country with mining restrictions - if your own Ton connection is using Stratum over TLS.
• New parameter --silence that controls the amount of information the miner will print during its work. 0 is the default behavior, 1 will turn off "new job" messages, 2 will additionally turn of the messages about found shares, 3 will leave the miner with the minute statistics only.
• Added Nvidia memory junction temperature readings on cards that support this, e.g. GDDR6X customer GPUs, most professional and server GPUs and so on.

Fixes

• Fixed a bug with dual mining on LHR cards where the dual algorithm was mined with reduced rate after Ethash epoch change.
• Fixed a bug with --compactaccept not showing the * sign on short statistics.

Important notes about the new LHR unlocker scheme

• Use 470.103.01 or 510.x drivers! They have turned out to be much more stable in unlock in testing then older drivers.
• The miner software needs to learn certain aspects about your cards over time to optimize for the best balanced pool hash rate. The needed calibration will get better over time, but the things learned are too complex to display them or store into parameters.
• Therefore in automatic mode the miner might start with a slightly slower hash rate at the beginning, but will get better over time. In non-automatic mode you might see more re-calibrations during the first hour of mining then normal. If the number keeps too high after that point, lower the requested % value.
• As a consequence: the longer you can keep it running the better - avoid frequent restarts of the software.
• Dual mining with Aleph & Ton is supported as well as doing ZIL dual mining. When doing ZIL make sure --enablezilcache is used on all the LHR cards, because the re-calibration is needed on every hard epoch change.
• Try to keep your settings as stable es possible. Especially: Set clocks that your GPUs can keep without running into thermal throttling. Also use locked clock core with no set power limit to maintain a stable GPU core clock for ideal results. Having GPUs freely changing their clocks and sometimes running into their power limit will invalidate a lot of data collected and decrease efficiency of the unlocker a lot. Same applies to memory clock - do not change it after the calibration did start. Use --lhrwait parameter to delay the initial calibration until you are done with your settings.
• The initial configuration takes approx 3-4 minutes from the moment the DAG was build.
• Keep away other work load from your GPU as e.g. connected screens. Also CPU mining in parallel to the new unlocker is untested and might give unexpected results.

Changes

• Significantly improved the Ton performance in Eth+Ton dual mining for all supported GPUs. Gain is 15-20% over the old implementation at same Eth reward - combined with new tuning some cards can be much higher (e.g. RX 580) while others optimize for more Eth hash rate (e.g. RX 5700)
• Changed the Eth+Ton and Eth+Alephium tuning functions on AMD and all Nvidia non-LHR cards. Tuning now uses a scoring function to score resulting Eth and dual coin rewards and try to optimize this. Note that with --maxdualimpact you still can just define the max % of Eth hashrate to give away. This will overwrite the scoring function.
• Added experimental Eth+Alephium dual mining kernels for Pascal GPUs.
• API now also gives the worker name on Ethash, Ton and Alephium mining.
• Updated Web-gui.
• Ton stratum: https://next.ton-pool.com now using mode 2 automatically again. New whalespool server wss://stratum.whalestonpool.com/stratum now using mode 6 automatically.

_Fixes _

• 1.46a: Fixed a bug causing the miner to sometimes end up in an infinite re-connect cycle - instead of actually reconnecting
• 1.46a: Fixed a bug causing --maxdualimpact not having effect on some Nvidia cards
• Fixed a bug causing connection time out (for a retry) not working properly
• Fixed a bug in Alephium stratum: miner did not check fail-over when primary worker name was not accepted by the pool
• Fixed a crash when trying to specify more fail-over pools for dual algorithm then for the primary connection
• Windows: fixed a bug causing dual mining (especially Eth+Alephium) freeze the card & driver on startup
• Fixed some minor glitches

Changes

• Added Ethash + Alephium dual mining mode analogous to existing Ethash + Ton mode. Use --dualmode ALEPHDUAL to use it. Supported GPUs: Nvidia Turing & Ampere generation, AMD Polaris (RX 400, 500), Navi and Big Navi generations.
• Stratum connections will now have an increasing timeout (steps of 5 seconds) when reconnecting plus a small random time of 1 second in order to not overload the target pool in case of recovering from a network outtake.
• lolMiner API now has new page /gui, which allows you to watch your rig mining in a web browser. Navigate to http://<ip of your rig>:<apiport>/gui in your brower doing so.
• Added experimental (at the moment a bit slow) Ethash kernels for new AMD BC-250 APUs
• In dual mining the algorithm that mined a share will now be shown in command line output
• --ton-mode 6 stratum mode will now obey the prefix send to it on the first bytes of the nonce (request from other pools that want to use this scheme)
• Startup time of dual mining on non-LHR cards is now reduced to 30 seconds after DAG build
• Removed --ton-mode 2 from automatic detection (you still can request it explicitly) - ton-pool.com will instead use mode 1 for existing and mode 6 for upcoming new stratum servers.

Fixes

• Fixed multiple stratum bugs - mostly crash fixes when running web socket based connections
• Windows: clicking into the miner Window will no longer halt the miner completely

Features

• Added experimental Ethash + Ton dual mining kernels for Nvidia Pascal generation GPUs.
• Setting the parameter --maxdualimpact to 0 will now completely disable dual mining on this card.
• Setting the parameter --dualdevices can now be used to make GPUs mine Ton only in Eth+Ton dual mode. In combination with --maxdualimpact this means one can choose for every card which algorithm to mine. (See example below)
• Automatic tuning for dual mining will now always make sure the parameter is adjusted so the GPUs start on both algorithms if --maxdualimpact is not set. Manually setting --maxdualimpact will disable automatic parameter stretching.
• Windows: Adjusted LHR parameters a bit for more stable operation.
• icemining.ca Ton stratum now can use the --pass or --dualpass parameter to apply pool settings.

Fixes

• Windows: fixed a bug that caused abnormal high stale rates on Ethash and Ethash / Ton dual mining on Nvidia cards.
• Windows: fixed a bug that made the miner crash when a https connection tried to re-connect (mostly Ton).
• Linux: fixed a bug that might cause a SIGSEV or SIGPIPE crash on some Linux platforms when reconnecting.
• Fixed a bug that caused the miner to enter re-connect routine when one endpoint of a Ton - pool did not work, although other endpoints did connect well (That in combination with the previous one was root cause for most Ton errors in Windows we recently had).
• Fixed a bug with icemining.ca Ton stratum not sending correct job id when dual mining on AMD cards.
• Fixed a bug with json style configuration not working with dual mining in 1.43 release version.
• Temporarily disabled the ZIL cache function on AMD GPUs, because it sometimes did not swap clearly. We will bring this back as soon as possible.

Example for --dualdevices and --maxdualimpact Consider a 6 card rig with --dualdevices 4,5 --maxdualimpact 0,0,*,*,*,* This rig will mine:

• Eth only on GPUs 0 & 1 (ton dual mining disabled by maxdualimpact)
• Eth + Ton on GPUs 2 & 3
• Ton only on GPUs 4 & 5 (eth mining disabled by dualdevices)

Changes

• Added DNS over HTTPS name resolving for establishing your pool connection. This has advantages when your normal DNS resolving might be blocked or modified by a firewall. You can control its behavior with the parameter --dns-over-https value with the values 0: turns DNS over HTTPS off; 1: DNS over HTTPS is enabled, fallback to normal DNS resolving is possible (default); 2: enforcing DNS over HTTPS, normal DNS is completely disables (1)
• Updated internal libraries for TLS connection handling
• Moved more fee pools to use TLS connection. When mining Ethash, Etchash (both +ZIL), Ergo and Beam the fee connection is now always encrypted (TLS 1.2) and mining data packages can not be identified as such.
• Changed LHR kernel defaults for RTX 3060 and RTX 3070, because the default ones had an issue with defect shares at high oc.

(1) A big kudos to Flexpool for helping out with this

Feature Changes

• Improved Ethash performance on Turing based graphic cards (GTX 16 series, RTX 20 series, lower tier CMP cards) by about 0.4 to 0.7%.
• Improvement of Ethash performance (up to 1%) and reduction of stale share rate for Maxwell and Pascal (GTX 10) based GPUs.
• Changes LHR tuning algorithm to minimize the number of locks & time for finding a stable value: The tuning might be improved by the miner later once stable for long enough time.
• Improved LHR performance for 3060 V1 (GA106-300-A1) on older drivers (460.39 and earlier)
• Added Ergo kernels for RX 6700XT and RX 6600 (XT) on newer AMD drivers.
• Ethereum stratum code will now print the pool difficulty in better human readable number
• The miner will now print the ip of the connected pool - to be able to detect e.g. faulty DNS entries
• Added parameters --dualtls and --dualworker to toggle TLS and the worker name for the dual connection. To be used as with the parameters for the standard connection.
• --statsformat can now distinguish between the number of LHR locks "lhrlks" and the current --lhrtune parameter "lhrparam"
• Added a parameter --vstats to modify the terminal width in number of characters to overwrite the automatic detection, which sometimes does not work with some terminal emulators like putty.
• Added a parameter --hstats . Given this parameter will switch the statistics to a way such that the statistics write a horizontal line per GPU instead of the default vertical (see screenshot below). When the automatic read terminal width is reached, the remaining entries will be printed to a 2nd set of lines. The vertical statistics can be combined with the usual --statsformat patterns to customize the displayed values per card. The optional number overwrites the the automatic screen width detection. To fit all values of --statsformat extended into one line we need --hstats 150 or higher (recommended setting this value manually when accessing the rig via terminal emulator).

Fixes

• Fixed 3060 V1 (GA106-300-A1) internal parameters for drivers 460.39 and below, stabilizing the hash rate (they pretty much did not work stably unlocked in 1.36)
• Fixed a bug causing a wavy hash-rate report in some FHR rigs
• Fixed a bug causing --mode a kernels to be defect for Ampere and Turing GPUs in 1.36(a) releases
• Fixed a bug causing a segmentation fault when trying to mine EXCC.

Feature updates

• Improved Ethash & Etchash performance on all Nvidia Turing & Ampere GPUs by 0.3 to 0.7% depending on card & system.
• Decreased rate of stales on Nvidia Turing & Ampere GPUs.
• Modified LHR auto tuning to use finer steps (0.2 instead of 1). Also when the miner is more then 2 hours stable on its current settings and a lock appears, the card will unlock again, but the tuning will not be reduced.
• New parameter: --lhrwait n will set the miner to wait n seconds, until the LHR detection and calibration gets active. Allows to wait for systems with delayed memory overclock settings.

Fixes

• Fixed a potential crash between switching between cached Eth and Zil dag on Nvidia cards
• Fixed a bug: Worker name got lost on ezil.me mining pool (since 1.34)
• Fixed a bug causing rare defect shares on LHR cards
• 1.36a: Fixed a bug causing no LHR unlock to normal speed after epoch change
• 1.36a: Reverted some LHR kernels to a specification more similar to what was in 1.35. These are default in Windows and on RTX 3080 on Linux, other cards can request this kernels by using --lhrtune wauto or wTuneNumber in case the default is unstable.

Feature changes

• Ergo: Adjusted all codes mining Autolykos v2 to be ready for the epoch 1 and higher, starting Sunday Nov 7th ~8 am UTC. To continue mining Ergo, please update to this version. (1)
• Ergo: Added ability for all AMD cards to pre-build the next Ergo data set while mining. This is at a cost of slightly slower mining directly after a height change, but generally improves poolside performance. In case you find it unstable the pre-building can be deactivated by using parameter --ergo-prebuild -1 / 0 / 1. Here -1 stands for the cards default, 0 is off, 1 is on. Default is on for all AMD GPUs except GCN1 and Vega generations - those were more stable with the option turned off. The value can be set per card by using a comma separated list of values.
• Ergo: Improved performance of AMD Hawaii generation of chips by about 2%.
• Ethash: Added error correcting tables to check the DAG integrity up to epoch 499 (Early June 2022)
• Ethash: Added option to use the version 1.33 semi-unlocker style - this was more performant for some GDDR6X cards. Use --lhrtune xauto to activate the 1.33 solver style auto tuning and use --lhrtune x to set a predetermined tune value. The 1.33 style solver can be mixed with 1.34+ style solvers by using a comma separated list of values.

Bug fixes

• Ethash: Fixed a bug some crashed Nvidia cards did not trigger the watchdog
• Ethash: Fixed a bug causing the worker name not to be correctly passed to the pool in some cases in 1.34(a)

(1) The new Ergo epochs will increase the size of the data set used for mining by 5% every ~75 days. Some cards might need a bit more core clock to achieve the used performance. Also 2G cards in zombie mode will see a significant reduction in speed, because the data set is more then 2150 MBytes in size now.

Fixes

• Added further epochs to the dag correction detection / table. This can resolve issues with defect shares that appeared in 1.34 or earlier with start of epoch 450.
• Slightly changes internal LHR parameters of 3070 ti & 3080 - we hope to improve stability by this plus a small speedup.

Note: this is a Linux only release and also of rather temporary character. The added epochs will minimum last until the 1.35 release. After that an update should be made.

Rework of LHR semi-unlocker (again)

• Improved performance of RTX 3060 and RTX 3060 Ti by up to 2%, generally allowing a bit less core clock
• Auto tuning will now be quicker to reasonable hashrates
• Improved stability on found parameters
• Found parameters that are hard coded with --lhrtune are now applied within 30 seconds after dag build
• --lhrtune now understands the parameter "off" to disable any kind of LHR handling - this is useful for cards that sometimes trigger the lhr detection although they are non-LHR.
• Improved compatibility with many current drivers. Still on Linux we recommend 470.74 and on Windows 472.12 for LHR v2 cards. The 460 series drivers might perform up to 0.5% worse. For 3060 LHR V1 use either 460.39 or earlier driver (Linux) or the full unlock with 470.05 Beta in Windows.

Feature updates

• The parameter --workmulti now has effect on Nvidia GPUs on Ethash. Default value is 192, lower values will improve stale count, higher values will reduce CPU load (and can be a tiny bit quicker, although only very tiny).
• Added support of RTX A6000 / RTX A5000 / RTX A4000 (and future RTX A2000) Nvidia workstation GPUs
• Reduced RAM usage of Nvidia Ethash solver (some 10+ card rigs got issues with 1.33 when they only had 4G of memory)
• --statsformat now understands the string "lhrinfo" to print the --lhrtune parameter and the lock count in custom set up statistics.

Fixes

• Fixed a bug with --tstop or a lost stratum connection triggering a LHR GPU to lock
• Fixed a bug that RTX 3070Ti only triggered the lock detector on rather low memory clock.
• Fixed a bug with invalid shares in Pitcairn Ergo Zombie mode
• Improved stability of Ethash stratum and statistics module - fixed minor issues that might rarely cause a miner crash in them.

Core Feature: Complete rework of LHR semi-unlock feature

• Better performance of LHR semi-unlock, about 70%+ on GDDR6x cards (3070 Ti & 3080 (Ti) ), about 71-72%+ on GDDR6 (3060 (Ti) & 3070), 81%+ on 3060 LHR V1 with the right drivers (earlier then 460.39). Recommended driver for LHR v2: 470.74 (Linux), 472.12 (Windows) Important hint: We saw some calibration bugs with 460.93 driver (Linux). Please do not use it!
• Less performance difference between low and high core clock then earlier versions
• Cards are automatically detected if they are LHR - no more --mode switch required
• In the beginning the miner will calibrate to your exact core & memory clocks. The total process takes 3-4 minutes total, one with rather low speed and the remaining time with speed closer to the final value. Try not to change any overclock after or during calibration, else the performance might be lower then expected!
• --lhrtune has now default value of auto for an automatic tuning. Results of automatic tuning will be displayed in stats after calibration is completed. Note: re-tuning of values used in 1.32a is required!

Other feature changes

• Default --shortstats interval lowered to 15 seconds, default --longstats interval lowered to 60 seconds
• More stable displayed hashrate on Nvidia cards when mining Eth
• Changes in Api: On supported algorithms the miner now exposes the number of stale shares in API (stales and defect shares are no longer collapsed into one value)

Fixes:

• Fixed a bug with processing old style --dualmode etc dualmine settings
• Fixed some minor bugs of the API
• Fixed a bug causing a non-realistic high hash rate to be displayed on LHR cards when overclocked after start

• Beta Feature: Added RTX 3000 series semi-unlock for LHR v2 cards giving up to 30% more performance then in locked state. Use --mode LHR2 to call it (and --mode LHR1 for 3060 LHR1 cards). Also added a low power LHR mode for V2 cards (--mode LHRLP). See below for more details. Recommended drivers for LHR2 and LHRLP: 470.63.01 or 465.31 - others could be more unstable. Most tests were done in Linux. Use --lhrtune to improve either performance or stability. Read the guide for configuring here: https://github.com/Lolliedieb/lolMiner-releases/wiki/Nvidia-Mode-Switch-&-LHR-Semi-Unlock (2)
• Improved performance of RTX 3060 LHR v1 semi-unlock by 2-3% depending on configuration - at same low consumption!
• Added detection of the "fan glitch" for RTX 3000 LHR cards. When the glitch is detected, the GPUs will leave the special LHR modes automatically.
• Significantly improved Ergo performance on GCN Gen 1 GPUs (e.g. HD 7970, R9 280, R7 370)
• Added Ergo kernels for Pitcairn GPUs.
• New configuration scheme for Et(c)hash + Zil dual mining with dual stratum! See documentation here: https://github.com/Lolliedieb/lolMiner-releases/wiki/Dual-Mining-from-1.32. When using json configuration style use "DPOOLS" with same format as "POOLS" currently.
• When a pool requests a re-connection, the miner will now do so immediately instead of waiting 1 second and no longer say the connection got "lost".
• Added support for extra nonce subscription on Ergo stratum - this will cause less reconnects on Nicehash

Fixes

• Fixed an issue causing "invalid" shares on Ethash when the pool makes intensive use of variable difficulty (e.g. HiveOn, Nicehash...) (1)
• Fixed an issue that might cause the epoch to update too late when doing Eth + Zil dual stratum
• Fixed an issue causing too much stale or very late shares in Ergo
• Fixed partially defect .bat example files
• Updated complete network stack to newer libraries - for more stability.
• A lot of internal re-structuring and fixes.
• 1.32a: Fixed --mode LHR1 not starting in unlocked state on many systems.
• 1.32a: Fixed 3060 LHR V1 not starting in semi-unlock when the right drivers are detected.

(1) Thanks to my Spanish mining community for letting me know and the help to track down this issue. (2) Feel free to discuss good tuning values in the discussion section of this release page.

Fixes (compared to 1.30)

• Fixed a bug with Ethash Nicehash protocol reporting "conversion of data to type 'b' failed" on new jobs.
• Linux: Slightly adjusted parameters for RTX 3060 (LHR V1) semi-unlock to be more resilient over different configurations.
• Windows: Re-Worked GPU detection mechanism fixing the bug that miner fails to start up on some systems without any error message.

Known issues:

• Pitcairn GPUs (HD 7850, R9 270, R9 270) still need a new kernel for Ergo. This is work in progress.

Note: Windows version will follow in a few days. Sorting out driver issues ;)

• Added Autolykos V2 mining (ERGO) use --algo AUTOLYKOS2 to select it (a)
• fee: 1.5%
• Cuda solver: Supports Nvidia Maxwell (GTX 900 series) and newer GPUs with at least 3G of VRAM
• OpenCL solver: Supports AMD GCN1 (Radeon HD 7950) and newer (b) with at least 3G of VRAM
• Linux: Experimental zombie mode for AMD GPUs with 2G of memory (like HD 7870, RX 550, ...) (c)

Further feature changes

• Improved performance of RTX 3060 semi-unlocker in Linux
• Reduced power draw of RX 3060 semi-unlocker in Linux

Fixes:

• Significantly improved DAG repair process on all Nvidia GPUs. Even at high OC now the DAG should be created successfully withing a short time.
• Fixed a bug with 3060 semi-unlocker not unlocking after DAG rebuild
• Fixed a bug in Ethash stratum when mining with Nicehash protocol on some pools not sticking 100% close to protocol.
• Some minor fixes

Notes: (a) General tuning tip: The dataset generation of Ergo is more core heavy then e.g. for Ethash. Please allow more core clock and accordingly voltage! The mining phase of Autolykos V2 instead is not very power hungry. So the average consumption can still expected to be rather low.
(b) Optimization target were AMD GCN 3 cards with 4G of memory like RX 470, 560, ... (c) In case the miner does not start on older cards, try to increase --keepfree slightly. Personal note: I am aware many would like to mine Ergo+Zil ... this will be possible in future versions, but before I am changing some things how ZIL mining works internally - to make it more flexible to be added to other x + Zil configs :)

This is a Linux only release

Added the Nvidia 3060 "Unlocker" for Linux. This new mode mode allows to mine at a speed about 3/4 of the maximum speed of this cards. Differences to popular Windows solution:

• Works with Linux
• Does not fully unlock card, but partially (~3/4 of max performance, +40-45% over locked card)
• Allows using risers
• Allows multiple GPUs in one system
• Needs Nvidia Linux driver between 455.45.01 and 460.39, 460.39 is the recommended. Other driver versions will run at locked speed.

Read the wiki page about more information and how to install this drivers on your favorite mining OS: https://github.com/Lolliedieb/lolMiner-releases/wiki/3060-Booster

• Significantly improved / speed up DAG repair function. The miner now should produce a valid DAG also at high overclock.
• Emergency temperature stop (--tmode, --tstart, --stop) now also working for Nvidia GPUs using CUDA.

Fixes

• Zombie mode GPUs no longer crash during DAG verify.
• When one Nvidia GPU stops because of a recoverable error (e.g. not enough memory for DAG or temperature limit reached), this will no longer crash all other Nvidia GPUs.
• The parameter --disable-dag-verify was not working for OpenCL fired cards. Not it does.
• Fixed overzealous reconnection on Ethash connections when not receiving new work within 30 seconds (now limit is 150 seconds). This caused problems, especially on ETC+ZIL.
• Fixed 3G Nvidia card not starting on ETC mining

• Added verify routine for Ethash dag epochs 400 to 450. In case the miner will detect defect entries, the CPU will try to fix this. Mining will be paused until the repair is completed. Use --disable-dag-verify to disable the verify & repair mechanism routine.
• Re-worked default Ethash kernels for Pascal GPUs - improved their performance
• Added Ethash kernels for Fermi and Kepler GPUs. Most of them will only work for small epoch Eth forks.
• Nvidia cards on Ethash now pause when the stratum reports no current work (e.g. when connection was lost).
• Added a split DAG mode for Nvidia GPUs in case that the memory allocation fails on the primary kernels. This will be a bit slower, but improve compatibility, especially for 5G GPUs. Use --mode s to force it.
• Added parameter --cclk to fix the core clock of Nvidia Turing and newer GPUs without using external tools. Use a comma separated list to give different values to cards, use * to skip over cards. Needs super user or administrator privileges to work. See a detailed description here: https://github.com/Lolliedieb/lolMiner-releases/wiki/Fix-Clock-Nvidia-for-Cuda-by-lolMiner-(English)
• Added new dualmode zilEx. This works like --dualmode zil but with the ability to use --dualdevices to exclude GPUs from switching to ZIL. They will continue on the secondary connection and do not switch.
• Added new dualmode eth. This will allow to point different GPUs to different pools.
• Added parameter --statsformat to use custom format for the bigger statistic box. The expected values are either compact or default or extended or a comma separated list of values. Use --help-format to get a list with accepted entries. The list is also documented at https://github.com/Lolliedieb/lolMiner-releases/wiki/Stats-Format-(English)
• Added reading of current core and memory clocks for AMD and Nvidia GPUs

Fixes

Fixed a stratum error, that caused the "all shares stale" bug when too many reconnect attempts in a row did fail Fixed a crash on Nvidia GPUs when mixing ethproxy and Nicehash stratum modes in dualmodes. Fixed zombie tune values not applied when using json format for configuring Fixed displayed names of RX 6000 generation of cards and RTX 3060 in 460.x drivers.

Deprecation notice

This will be the last release that allows to use the Zombie-Mode in Windows. This is because the current implementation will start throwing invalid shares at some point and also going too slow to be worth using it any more. Furthermore Cuckaroo-29 with 48 cycle length - originally planned for Italocoin - got removed because of the lack of use.

• Slightly improved performance of Ethash on Pascal / Turing & Ampere GPUs (about +0.1 - 0.2 mh per card)
• Further reduced internal latency in Ethash Cuda back end (less stale shares & CPU load)
• Added experimental Grin-C32 kernel for Radeon 6700

Fixes

• Fixed a bug in Cuda back-end to crash with a segfault on Epoch change (introduced in 1.25)
• Fixed a bug that Nvidia-GPUs did not start when Cuda Toolkit was not installed (It reported "No OpenCL devices found ..." - which was complete nonsense)
• Fixed some (rare) potential faults in Beam stratum
• Windows: Fixed message about Light Cache build time was missing (introduced in 1.25)

Added a real Cuda back-end for better Nvidia GPU support on Ethash. Features:

• Supports Maxwell to Ampere GPU generations.
• Two different mining kernels. Use --mode a (faster) --mode b (better energy efficiency) to select between the two. The selection can be done per card via a comma separated list. In mixed system select 'a' for skipping over the AMD cards.
• Both kernel modes need less energy and perform better then in 1.24a
• Reduced internal latency for less stale shares
• Reduced CPU load when mining with Nvidia cards
• lolMiner works now without OpenCL driver installed
• In case of mixed rigs AMD GPUs will use OpenCL while Nvidia cards use Cuda
• ZIL cache feature fully supported (and stable)
• Temperature stop & Zombie mode is currently not supported

Further Changes (over 1.24a)

• Added Ethash, Beam Hash III, Grin Cuckatoo 32 and Cortex kernels for RX 6700
• The Ethash stratum interface will now try to run up to three attempts of reconnecting before switching the stratum mode

Bug fixes

• Fixed "Warning: index out of bounds" error when switching from ETHPROXY to ETHV1 stratum mode. This might solve problems with some pools on connection loss.

Recommendations for Cuda backend

• Recommendation: When using lolMiner on Nvidia cards only use "--watchdog exit" mode and run the miner in a script that will automatically restart it on closing.
• For ideal efficiency fix the core clock, do not use the offset functionality. Recommended values for selected GPUs:

(1) Using Windows and Nvidia Driver 470.05 Beta

lolMiner 1.22 - 1.24 are Linux only releases that targets improvements of the performance of the zombie mode in the Linux specific code. Therefore the yesterday released version 1.21 will remain the recent release for Windows. Miners that do not have a card using the zombie mode can safely ignore this update - it will behave identical to 1.21.

• Added (tunable) zombie mode kernels for R9 290(x) and R9 295 GPUs - on a popular request.

Bug Fixes

• Fixed a bug, that often caused the amdgpu driver to report a VM_CONTEXT1_PROTECTION_FAULT_STATUS on startup
• Fixed defect shares and wrong reported has hrate when started with fixed --zombie-tune parameters directly
• Fixed a bug with Baffin (RX 450,460, 550, 560) and Tonga (R9 380(X) ) GPUs showing too high hashrate and producing invalids in 1.23 zombie mode.
• Fixed a bug with ETC mining not starting up when more then two 4G GPUs in 1.23.

Personal release notes I received quite some requests with problems about Nvidia cards and also if I can add in zombie mode kernels for 4G Nvidias and RX 5500. I need to say I tried, but there are some hurdles that prevented it. I will do better Nvidia codes in the future, but preparing it takes time. That said the Navi cards somehow to not like to zombie tuning at all, that is why they only feature the standard zombie mode. Currently I also can not recommend mixing them into rigs where RX 4xx and 5xx cards run in zombie mode, because that seems to cause stuck systems from time to time. Mixing with 8G cards and do normal mining seems not to be an issue though.

lolMiner 1.22 & 1.23 are Linux only releases that targets improvements of the performance of the zombie mode in the Linux specific code. Therefore the yesterday released version 1.21 will remain the recent release for Windows. Miners that do not have a card using the zombie mode can safely ignore this update - it will behave identical to 1.21.

lolMiner 1.22 is a Linux only release that targets improvements of the performance of the zombie mode in the Linux specific code. Therefore the yesterday released version 1.21 will remain the recent release for Windows. Miners that do not have a card using the zombie mode can safely ignore this update - it will behave identical to 1.21.

• Significantly improved the performance of zombie mode on RX 400 and RX 500 GPUs in Linux, especially for low zombie tune values between 0 and 4 and rather high epochs. Performance increases by 7-11% on epoch 393 (--4g-alloc-size 4080 on a RX 580. 4G) and 15-20% on epoch 400. Re-tuning using the auto-tune is recommended. Also this version might draw a bit more power, but with approximately same total efficiency.

• slightly improved the performance of Linux zombie mode on Polaris GPUs on medium tune stages (needs re-tuning from previous settings)
• increased range of accepted zombie tune parameter for GPUs with high interconnect bandwidth
• slightly decreased GPU load of Polaris GPUs during DAG build
• Added more control about handling cards that are detected to be non-working any more. Use parameter --watchdog off/exit/script to turn off any action, exit the miner with a specific exit code or to run an external script. See detail description on the 1.21 release page
• Nvidia cards that experienced a OpenCL driver error (e.g. "CL_OUT_OF_RESOURCES" will now also trigger the watchdog with the configured effect.
• The --ethstratum parameter can now take two options separated by a ',' to give different options in case the dual or split mining mode is used.
• The dns resolving and the connection attempt can now timeout (after 10 seconds each) and will re-try to connect afterwards. This fixes an issue when a pool went offline and the following connection attempt takes indefinitely much time. Each timeout event contributes to the counter that will trigger switching to fail-over pools.
• New option --apihost (default 0.0.0.0) which controls to which host address the api binds. Use 127.0.0.1 to restrict api access to only your computer, 0.0.0.0 is equivalent to everyone can access when rig is reachable on the used apiport. IPV6 ip addresses should be supported, but is untested.

Fixes

• Fixed a issue that might cause the rig to drop to 0 hash rate on epoch changes - including changes with activated ZIL caching
• Fixed the pool hash rate reporting not working correctly in dual & split stratum modes
• Fixed the dual stratum connection not picking up the correct worker name when --worker is used
• Fixed miner not loading Ethash / Etchash kernels on Tahiti and Hawaii GPUs when using older then end 2017 drivers.

Note on Watchdog use There are different reasons why a card might crash and drop to 0 mh/s or g/s or sol/s. Often this happens when the card is slightly too much undervolted, but other problems like heat are possible. Additionally the OpenCL driver of Nvidia cards sometimes crashes with a CL_OUT_OF_RESOURCE error - this is rather a software then a hardware thing and will be fixed soon. Anyways: Once a card is crashed some cards - mostly AMD cards - need a system reboot to get the faults card working again. Other cards - mostly Nvidia - just need a closing of the miner program - a few seconds wait time - and then are fine to get going again. Therefore the crashed card detection now allows three different options to proceed with a crashed card or driver:

--watchdog off This will do nothing except for printing a message. If only a single card did crash and not the whole driver this means the other cards will continue mining.

--watchdog exit This will close the miner with a exit code of 42. This can be picked up by the .sh or .bat script that did start the miner (an example is provided in mine_eth.sh and mine_eth.bat) so the miner will restart after some seconds of pause. This is recommended option for Nvidia cards.

--watchdog script With this option the miner will call an external script (default path is current working directory and there emergency.sh / .bat), which can be configured with --watchdogscript. The moment the script is called the miner itself will exit. The script needs to take care about rebooting the rig or informing the OS what to do. Since this was the default behavior in previous versions it also is the default. In case the script can not be found, an error will be printed and the miner will continue as with --watchdog off.

• Significantly improved Ethash mining speed on R9 390 (+6 mh/s on stock settings compared to 1.19) and Etchash speed on R9 290.
• Added new split & dual mining options. This allows more freedom or better latency and stability on ETH+ZIL dual mining as well as split mining, i.e. let some cards mine ETH while other (3 and 4G) cards mine ETC. Read instructions on usage here: https://github.com/Lolliedieb/lolMiner-releases/blob/master/dual_and_split_mining.md
• The archives for ZIL example files now contain examples how to bypass the ZIL pools. Also an example configuration for ETH / ETC card split is provided.

Bug Fixes

• Fixed a bug with 4G cards crash on mining ETC when trying to falsely enter zombie-tune.
• Fixed R9 380 cards not start mining Beam
• Fixed "Address already in use" API bug in Linux (that incidentally got introduced in 1.19)

About the split mining There are two new splitting modes. Read here for configuration: https://github.com/Lolliedieb/lolMiner-releases/blob/master/dual_and_split_mining.md

a) For ETH+ZIL or ETC+ZIL:
Usually when mining ZIL you need to mine ETH on the same pool or you need to rely on a pool proxy forwarding mechanism implemented by the pool. The first case restricts restricts your mining to a single pool while the latter might have the disadvantage of a worse ETH mining latency or pool forwarding instabilities. lolMiner 1.20 and up allow to bypass the situation by adding a second stratum connection that will pick up your ETH (or ETC) shares and bring them directly to the pool you like, while the ZIL shares will be send during the ZIL shard epochs to the ZIL pool.

b) For mining an other algorithm with your 4G cards: Usually miners allow using only one algorithm at a time. With lolMiner 1.20 the miner starts supporting to create two connections to your favorite pools and mine two algorithms within the same miner instance. Concretely this mode was build to mine ETCHASH on some GPUS while others stay on ETH.

• Added automatic tuning mode for --zombie-tune. This is default on, so just run the miner with --4g-alloc-size set only to run the zombie mode automatic tuning. At the end it will report the configuration in case you want to use the configuration again. You can also exclude cards from tuning or set their value manually, e.g. --zombie-tune 2,auto,0,auto will run the automatic tuning on the 2nd and 4th GPU while using fixed number 2 for first card and 0 for the 3rd one. The tuning will need about 30 seconds per card in the rig to show first results. The next two phases take about 1 minute per card and followed by a approximately 1.5 minutes fine tune phase.

• Ethash stratum connection will now reconnect after three pool rejected shares in a row that did pass own CPU verify before. This solves issues with unstable proxy forwarding e.g. in some ZIL pools. Also helps to get quicker to a failover pool if configured.

Fixed bugs

• Miner did not start up when "DEVICES" was configured in as a vector in json file, e.g. in some ETHOS configurations. #110

• Improved linux zombie mode power draw & speed Polaris GPUs (R9 380, RX Fury, RX 4x0 and RX 5x0). Depending on configuration, the zombie mode now uses 0.5 to 1W less energy and is 0.2 to 0.4 mh/s faster.
• Added --zombie-tune parameter for Polaris GPUs. This will increase the performance of zombie mode (further up on the general improvement) by an other 5-15%, depending on parameter and epoch (later epochs profit more). Default value is 0 (off), for most cards the value of 2 is optimal. If you see cards getting slower then before, set to 0 or 1. Note: you either can give one value for the whole rig or provide a comma separated list for each card individually. Cards not running zombie mode ignore the parameter.
• The parameter --4g-alloc-size can now also be set for each card individually
• Slight rework of Beam Hash III back end. Improves poolside hash rate by approx 0.2 to 0.3% - displayed hashrate and power consume kept equal.
• Added a 4G_Ethash_Linux_Readme.txt file to the Linux release, giving guidance how to configure for ideal zombie mode performance. See online version: https://github.com/Lolliedieb/lolMiner-releases/blob/master/4G_Ethash_Linux_Readme.md

Bug fixes

• Fixed: segmentation fault when the dns resolve of a pool fails #109
• Fixed: miner does not restart after connection loss. #108
• Applied potential fix for "address or port already in use" bug.

Compatibility note: The new zombie-tune parameter has only been tested with amdgpu-pro 20.30 and 20.40. Other drivers might cause issues. Also make sure your mining rig is configured to use PCIe-gen 2 connection to your GPUs.

Example effect of --zombie-tune parameter on the hash rate in Zombie Mode Note: it may be needed to tune each card individually. Tune value of 2 works for most cards, but some do not like the mode, especially when on PCIe-gen1 riser.

• Significantly reduced Ethash power draw on Navi GPUs, Slightly improved performance of 6800 (XT) / 6900
• Added Cuckoo-29, Cuckaroo-30 CTX, Cuckatoo-31 (MWC) and Cuckatoo-32 (Grin) for RX 6800 family of GPUs
• Reduced number of stale shares on Cortex algorithm. This will result in a minimally lower displayed hash rate, but higher pool side hash.
• Added a basic temperature protection mechanism. See notes below for usage.
• Added parameter --singlethread to work with Ethash and Equihash algorithm. This will disable the 2nd mining thread and slightly reduce performance of the involved cards. Use this option to reduce stumbles when a card does graphic output in parallel. Use --singlethread (equivalent to --singlethread -1) to enable single thread mode for all GPUs, use --singlethread to set the mode for one single card.
• Added reading of junction temperature on AMD GPUs.
• The API is now bound to the local host, causing less issues with firewalls.
• Windows: use --computemode to automatically enable the compute mode on all detected AMD GPUs. Requires higher privileges and a driver restart, see example files.
• lolMiner.exe Windows executable is now digitally signed.

Fixed bugs:

• Ethash Ethproxy stratum mode some times loosing worker name.
• Beam Hash III not starting up in Linux on RX 5000 & RX 6000 series card on amdgpu-pro 20.45 driver.
• Ethash & Beam not starting up on Radeon R9 380
• Ethash not starting up on some 6G Nvidia cards
• Ethash mining frequently trying to start up a card if there was an error during mining.
• "DEVICES" parameter not working when configuring the miner from json file.

Known issues:

• ETC mining is currently not working for Nvidia GTX cards with 3G of memory.
• On some Linux kernels there is a memory leak in the GPU driver component that effects lolMiner quite hard when mining with Navi cards. Keep system updated. (Note that this bug also affected earlier versions of lolMiner - so if it worked fine in last version it can be expected to do so further.)

_Basic temperature management / overheating protection. _ Use --tstop to stop any mining operation on a GPU at the given temperature. Use --tstart to allow a restart of the card below a lower temperature. Further you can use --tmode edge/junction/memory to apply the scheme to edge (chip), junction (hotspot) or memory temperature. If a GPU does not have the required sensors the chip temperature will be used as a back up - if no sensors are available at all the parameters will be ignored.

Note that at the moment the miner has no fan control module and also no throttling to keep a target temperature. This may be included in a future version. Thus you should put the limit high enough so the operation system or the driver has a chance to ramp up the fan speed itself. Currently tstop is supposed to be a overheat protection to prevent hardware damage in extreme cases, e.g. broken fans.

• Fixed performance regression on Nvidia cards
• Added support of Ethash and Beam Hash III for RX 6000 generation of GPUs
• All supported algorithms now show the share difficulty and have best share statistics.
• New feature: use --rebuild-defect n to trigger a rebuild of DAG if a GPU produced n defect shares on the current one. Default is 3, use 0 to deactivate this feature.
• New feature: Use --workmulti n to modify the amount of Ethash work a GPU does per batch. Higher values will cause less CPU load but more stale shares, lower values will give less stale shares but higher CPU load. Performance may vary for different values. Default is 128.
• New feature: if Ethash pool disconnects within 2 seconds from connection attempt (immediate reconnect), then the other stratum mode is tested to login.
• New feature: AMD Vega and newer cards now display memory temperature in statistics & api (only visible if there is at least one such GPU in the rig).
• Default ethstratum changed from ETHV1 to ETHPROXY for better pool compatibility.
• Stratum pool addresses now understand "stratum+tcp://", "stratum+ssl://" and "ssl://" prefixes (turning on or of ssl / tls automatically) for better compatibility with existing configurations.
• Slightly reduced CPU load when mining Ethash
• New coloring scheme with more friendly colors. For terminals that do not have rgb colors (e.g. shellinabox) use --basecolor to restrict to a simpler set. Use --nocolor to deactivate coloring completely.
• Fixed bug: Cards may crash when switching from ZIL cache back to normal mining.
• Fixed bug: Wavy hashrate - especially for rigs with many AMD Navi GPUs.
• Fixed bug: (Linux:) Watchdog not called when a GPU is stuck & extremely high CPU load on crashed GPU. (1)
• Fixed bug: Hashrate reporting not working on some pools (e.g. sparkpool)
• Fixed bug: Miner can crash after trying to reconnect to same pool over 5 minutes.
• Fixed bug: Miner crashes when mixing TLS and non-TLS pools for fail-over.

(1) Note on watchdog use: When the watchdog script is called the miner will stop working on the other cards. If this is not wished use --disablewatchdog. Please make sure the script can be executed with the current user rights / does password-less operations.

• Fixed bug: Miner causing invalid shares on 4G cards on some systems (mostly Linux)
• Fixed bug: Miner hangs up when changing epoch when using the ZIL cache feature
• Fixed bug: Miner sometimes produces invalid shares when a new job with different epoch arrives while the miner is currently creating the DAG file for an earlier job.
• Fixed bug: Miner not calling the default emergency scripts when a GPU was hung up (it only worked with custom scripts)
• Improved Ethash efficiency on Nvidia GPUs
• ZIL cache now can be used by cards with less then 8G when enough memory is available (e.g. 6G cards or when mining e.g. ETP + ZIL)
• General stability improvements (resolved many potential miner hangs up causes)
• Changed color scheme in Windows for Ethash mining (new jobs are now white, accepted shares green)

• Added Ethash Zombie mode for 4G Nvidia GPUs. Use --4g-alloc-size to calibrate the number of MBytes the GPUs are allowed to use.
• Fixed a segmentation fault on Nvidia & mixed rigs when starting Ethash mining

• Ethash: Reduced power draw significantly on non-zombie mode for Rx Fury & Rx 470 - 590, slight reduction for Vega & Navi
• Ethash: Slightly improved performance on Vega, Navi and Nvidia GPUs. Significantly improved performance on R9 390. (1)
• Added (Linux) Zombie mode for RX 5300XT & RX 5500 4G cards. Windows users can try it by using "--win4galloc off --4g-alloc-size 4008". (Vary the last number to find out sweet spot)
• Added ETCHash support for Radeon HD 79x0 / R9 280 (X) & RX 5300 3G. On Linux will be good for ETCHash till epoch ~250 (about July 2022)
• Added caching of last 5 used light caches. This will reduce the switching time for Nicehash & ZIL dual mining significantly.
• Added support for extranonce subscription on EthereumStratum/1.0.0 (Nicehash) format - this will stop the miner from frequently reconnecting to Nicehash
• Added detection of pool not accepting worker name in <wallet.workerName> format when using ETHPROXY stratum. Miner will reconnect with worker name copied into --worker in this case.
• Added experimental workaround for mining epoch 385+ with RX 470 - 590 and Linux kernel 5.6.x: Note this fix will deactivate the ZIL cache ability and force the miner to create DAG a bit slower. Deactivate it with --disableLinux56fix . Other Linux kernel versions and other GPUs are unchanged.
• Fixed bug: "conversion of data to type "b" failed" when using ETHPROXY stratum mode on some pools.
• Fixed potential issue causing GPUs to freeze when a GPU needs to reboot, e.g. epoch change or connection loss.
• Fixed benchmark mode for ETCHash. Use --benchmark ETCHASH --benchepoch 390 to benchmark performance post fork.
• Fixed benchmark mode not starting up when called from json type configuration.

(1) (its still not perfect, but way better)

• Added support for ETCHash (Ethereum Classic dag size reduction planned for end November). Use --algo ETCHASH to activate it. (See note on release page).
• Reworked Ethash codes for late epochs on Windows. See 4G_Windows_Readme.txt for configuring it.
• Slightly improved Ethash efficiency for GCN 3 (R9 Fury, 470 - 590) & Navi cards
• Added experimental support for Ethash on Nvidia GPUs (See note on release page)
• Added new parameter: --4g-alloc-size to define the memory allowed for Ethash on 4G cards. Maxing out will give more epochs of mining & better Zombie mode performance, lower values may improve compatibility. Suggested values: Linux: 4076, Windows 4008 - 4024
• Added new parameter: --worker to set the worker in ETHPROXY stratum mode (improves pool compatibility)
• Overall new Ethash host size back end - hopefully improving stability of mining
• Fixed bug: Zombie mode generates defect shares in Windows
• Fixed bug: Logs were not written when "LOG" : 1 was set in json style config file

• lolMiner got a restructure how to configure it and also features a 2nd, more simple config file format. Use lolMiner -h to get a list of new supported parameters or visit the new online manual
• Added optimizes solvers for Beam Hash III for AMD & Nvidia cards. Use --coin BEAM to auto switch from BeamHash II to BeamHash III on fork (approx June 28th, requires 8G card) or select Beam Hash III solver manually with --algo BEAM-III (requires 6G card)
• Added performance improved (+ >10%) GRIN-C29M solver for 8G GPUs
• Added Cuckaroo-30 solver to mine Cortex Ai (--coin CTXC or --algo C30CTX) for all 8G and higher GPUs
• Added support for non-integer difficulty on Grin
• Reactivated support for Beam Hash I including support for personalization strings.
• AMD Navi does now work on all supported algorithms
• Removed Grin Auto-Switcher (C31 is obsolete now and the switcher would not work on next Grin fork)
• Removed support for MNX (Minex Coin project is dead / abandoned by developers)
• Added temperature, consumption and fan speed readings in API and long statistics
• Internal bug fixes

• Improved GRIN-C29M solver, Better performance (+7-12% depending on card) and smaller memory use (fits 6G now)
• Added support for Radeon 5500 (XT) and 5600 (XT) on all Grin algorithms
• Added BEAM support for Radeon 5500, 5600 and 5700 series (Needing 19.30 and newer driver)
• Fixed driver incompatibilities with some newer driver versions (e.g. Linux 19.50)
• Renamed GRIN-AD29 to MWC-C29D to mine cuckarood-29
• Added a small penalty to C32 in auto switcher - it seems the solver has not perfect fidelity and the penalty will make it switch a bit later to cover this. Will hopefully be fixed in next version
• Removed 14 cycle fidelity from overview - new C29M solver does not output it properly.

• Significant improvement on GRIN-C29M performance (+6-7% on 580 and Vega cards, +10% on Navi)
• Significant improvement on GRIN-C31 and GRIN-C32 solver (~ +6% on all AMD cards)
• Added a 16G GRIN-C32 solver (Approx 20% faster on Radeon VII, Vega FE and 570 16G)

• Added support for Grin CuckarooM-29 (hard fork on Jan 16th) on 8G AMD GPUs, use --coin GRIN-C29M to mine with it.
• Improved C31 performance on 8G cards by ~5% (Windows: relatively to 0.9.3, Linux: relatively to 0.9.4)
• Navi on Windows now runs same kernels as in Linux
• Slightly lowered energy use of C31 / C32 solver
• Added aliases GRIN-C31 and GRIN-C32 for the Cuckatoo solvers (the old names still exist and continue to work)

• New GRIN-AT31 performance code for Vega (+7%) and Navi (+12%). Requires amdgpu-pro 18.50 or newer or ROCm 2.10 driver
• Experimental support for Cuckatoo-32 (use --coin GRIN-AT32) on 8G AMD cards (see further notes on releases page)
• Windows release postponed due to incompatibilities with the new performance codes.

• Extended GRIN-AT31 compatibility to older drivers (18.x +)
• Improved GRIN-AT31 performance on ROCm (RX 470/480/570/580/Vega/VII)
• Introduced early job cancellation for GRIN-AT31+ (improves hash on pool side, see further release notes on releases page)
• Deeply reworked kernel scheduler
• Fixed GRIN-AT31 kernel bugs (improving stability and fidelity)
• Fixed Bug: Vega FE loading 8G instead of 16G GRIN-AT31 solver in Windows
• Fixed Bug: Watchdog did not call right file in Windows
• Added --disablewatchdog 1 parameter to disable the 0 sol/s / 0 g/s detection

• Significant performance improvement of GRIN-AT31 on 8 / 16G cards (+5% on Polaris & Vega, +10 on Navi)
• Experimental support for GRIN-AT31 and Polaris, Vega and VII using AMD ROCm drivers
• Added range checks to GRIN-AT31 code (improves better stability)
• Added function to call external watchdog scripts in case a GPU fails during mining (see release notes)

In case the miner detects no action of a GPU for at least a minute it will call the included scripts "reboot.sh" (Linux) or "reboot.bat" (Windows) and display a warning message in red. Afterwards the counters are reset. The scripts can be used to trigger a reboot of the rig or to call any other watchdog actions. The miner itself will take no further action and continue operation on the remaining cards.

• Added GRIN-AT31 solver for 16G AMD cards (Better performance on Radeon Vega FE, Radeon VII and Sapphire RX 570 16G)
• Updated GRIN-AT31 solver for 4G AMD cards (Better performance on Fiji based GPUs, Polaris 10 4G)
• Fixed a bug causing too low pool hash on GRIN-AT31
• Added experimental GRIN-AT31 support for AMD Navi (8G), AMD Fiji (4G) and AMD Hawaii (4G / 8G) GPUs

Edit: support for Fiji was broken, A fix can be found here: https://github.com/Lolliedieb/lolMiner-preview/releases/tag/0.9.1hotfix

• Significant performance improvement for GRIN-AT31 on 8G AMD cards (+22% on Polaris to 30% on Radeon VII)
• Disabled 16G solver for GRIN-AT31 (the 8G is faster at the moment)
• Reduced Grin stale shares
• In command line lolMiner now accepts --pool address:port pattern
• Fixed a bug with the API crashing when accessed by Chrome based browsers
• Fixed a bug in EXCC stratum not passing number of submitted shares to the API

• Added support for Beam Hash II on older AMD cards (R 9 200 / 300 4 & 8G cards; R9 280(X), HD 79x0 with 3G). Note that the auto-switcher is only working with at least 4G, for the 3G cards please use --coin BEAM-II manually on fork height.
• Fixed an issue with Genesis Network (GENX) missing in lolMiner 0.8.x

• Added support the BEAM hard fork on block 321321 (approx Aug15th).
• Fixed a bug with the BEAM stratum back end in case of formatted job descriptions (e.g. new Nicehash platform)

• Fixed a 0 sol/s issue for Zelcash
• Reduced Zelcash memory usage to 2.9 GBytes
• Fixed a bug with the stratum for 125/4, 144/5, 192/7 and 96/5 in case the pool sends a very low job id.

• Added 16 GByte solver for Cuckatoo-31 (GRIN). Better performance and less energy use for Radeon VII, Radeon Pro Duo Polaris, Vega Frontier and RX 570 16GByte

• Added support for ZelHash (EquihashR 125/4/0) for the hard fork (July 2nd)

• Added support for NiceHash on Grin
• Fixed a bug with some pool software (e.g. grinmint.com)
• Reduced number of stale shares submitted

• Added support for Grin (Cuckatoo-31) for 4G (Slean) and 8G cards. The parameter is "--coin GRIN-AT31"
• Grin cycle finding is completely done on GPU, the miner has almost 0 CPU load (on AMD, Nvidia has some due to OpenCL back end)
• Stratum bug fixes (NiceHash) for 144/5, 192/7 and 96/5
• Fixed AUTO192_7 configuration
• Improved general stability
• Added a distinct 1G / 3&4G / 6&8G kernel for mining MNX (Windows, Linux had this in 0.7.1)

• Added support for Beam (BEAM, modified Equihash 150/5), only tuned for AMD cards
• Added TLS support for stratum. The default is off for all coins except Beam but on for Beam. This adds a new parameter --tls to control TLS on / off (see manual on usage)
• Some bugfixes and reworks in the stratum code. It is more stable now
• Complete rework of the mining back end. Lower CPU load for AMD graphic cards.
• GPU sorting changed. Its now sorted by PCIE bus address. This addresses are also shown at startup and in API.
• Integrated all kernel files to the executable
• Lowered fee of ALL algorithms / coins to 1%
• Added --help parameter (needs formating)
• API update interval is now fixed to 10 seconds
• API now smooths the performance data over approx one minute

Coin specific changes:

• Removed workbatch parameter for MNX, its obsolete now
• Removed 96/5 Nvidia specific kernel
• Changed Safecoin (SAFE) from Equihash 144/5 to 192/7
• Added Vidulum (VDL), Equihash 192/7