jippi / docker-pritunl Goto Github PK
View Code? Open in Web Editor NEWPritunl on Docker
Home Page: https://hub.docker.com/r/jippi/pritunl/
Pritunl on Docker
Home Page: https://hub.docker.com/r/jippi/pritunl/
I am facing certain problems when I didn't pass pritunl volume(/var/lib/pritunl
) while recovering after a server crash.
Does pritunl need persistent file system?
When I try to generate a SSL certificate for a new install, I get the following error:
File "/usr/lib/pritunl/local/lib/python2.7/site-packages/pritunl/acme_tiny.py", line 111, in get_crt
ValueError: Error registering: 400 {
"type": "urn:acme:error:malformed",
"detail": "Provided agreement URL [https://letsencrypt.org/documents/LE-SA-v1.1.1-August-1-2016.pdf] does not match current agreement URL [https://letsencrypt.org/documents/LE-SA-v1.2-November-15-2017.pdf]",
"status": 400
I was wondering if it would be possible to provide a Docker image that would be compatible for servers using the arm64 architecture?
I am not an expert in this field, so I am not sure if this would be technically possible.
Could you please clarify in the documentation why it's required to run this container privileged? I just tried running it without and it seems to work up to the point where you start the server. At that point it looks like nothing happens (although no error message is shown). I'd prefer to keep the number of privileged containers to a minimum so I'd like to know why this is a requirement and if there's any way around it.
Hello. I deployed via docker compose. The container created successfully but only one line of log is showing:
No log line matching the '' filter
Files in the volumes looks correct.
│ ├── index-55-7996217468716057611.wt
│ ├── index-57-7996217468716057611.wt
│ ├── index-5-7996217468716057611.wt
│ ├── index-58-7996217468716057611.wt
│ ├── index-59-7996217468716057611.wt
│ ├── index-60-7996217468716057611.wt
│ ├── index-61-7996217468716057611.wt
│ ├── index-62-7996217468716057611.wt
│ ├── index-64-7996217468716057611.wt
│ ├── index-65-7996217468716057611.wt
│ ├── index-66-7996217468716057611.wt
│ ├── index-67-7996217468716057611.wt
│ ├── index-6-7996217468716057611.wt
│ ├── index-69-7996217468716057611.wt
│ ├── index-70-7996217468716057611.wt
│ ├── index-71-7996217468716057611.wt
│ ├── index-73-7996217468716057611.wt
│ ├── index-74-7996217468716057611.wt
│ ├── index-76-7996217468716057611.wt
│ ├── index-77-7996217468716057611.wt
│ ├── index-79-7996217468716057611.wt
│ ├── index-80-7996217468716057611.wt
│ ├── index-81-7996217468716057611.wt
│ ├── index-83-7996217468716057611.wt
│ ├── index-84-7996217468716057611.wt
│ ├── index-86-7996217468716057611.wt
│ ├── index-87-7996217468716057611.wt
│ ├── index-8-7996217468716057611.wt
│ ├── index-89-7996217468716057611.wt
│ ├── index-90-7996217468716057611.wt
│ ├── index-92-7996217468716057611.wt
│ ├── index-93-7996217468716057611.wt
│ ├── index-94-7996217468716057611.wt
│ ├── index-95-7996217468716057611.wt
│ ├── index-97-7996217468716057611.wt
│ ├── index-98-7996217468716057611.wt
│ ├── index-99-7996217468716057611.wt
│ ├── journal [error opening dir]
│ ├── _mdb_catalog.wt
│ ├── mongod.lock
│ ├── sizeStorer.wt
│ ├── storage.bson
│ ├── WiredTiger
│ ├── WiredTigerHS.wt
│ ├── WiredTiger.lock
│ ├── WiredTiger.turtle
│ └── WiredTiger.wt
├── pritunl
│ ├── pritunl.uuid
│ └── setup_key
└── pritunl.conf
version: '3.3'
services:
pritunl:
container_name: pritunl
image: ghcr.io/jippi/docker-pritunl
restart: unless-stopped
privileged: true
ports:
- '1080:80'
- '1443:443'
- '1194:1194'
- '1194:1194/udp'
dns:
- 127.0.0.1
volumes:
- '/home/administrator/pritunl/data/pritunl.conf:/etc/pritunl.conf'
- '/home/administrator/pritunl/data/pritunl:/var/lib/pritunl'
- '/home/administrator/pritunl/data/mongodb:/var/lib/mongodb'
Please help!
Is it not possible to move the pritunl.conf file to its own directory so that it doesn't have to be manually created before running this container for the first time? Since Docker doesn't (yet?) allow container single files to be copied to the host, this is necessary since pritunl.conf is in /etc/ with a bunch of other files that we're not interested in making persistent.
I couldn't get UDP working on 1194 despite forwarding 1194/udp, but it works after exposing 1194/udp. I am guessing that because it has EXPOSE 1194
it doesn't automatically expose 1194/udp.
Then using the embedded mongodb, the volume does not populate with mongodb files.
By just switching to latest from latest-focal mongodb files are populated.
If I want to switch from latest-focal
tag to latest
tag do I need to upgrade the existing Mongo DB from 5.0 -> 6.0 manually? The readme only specifies upgrades up to 5.0
Thanks
what is a recommended way to upgrade to the latest tag? noticed mongodb has changed versions and it currently does not start using old volume files
Hello, I am getting this error after i have upgraded to image a9aa1d2a63efc7f58340d78547086b7fd1a1c445b09b0d3fa772276f2465a8e7 since upgrade i could not make pritunl work i have tried delete my volumes and pull the image but i have ended up with same results. i am running Alpine Linux v3.18 with kernel 6.1.32-0-lts docker version 24.0.2 and docker compose v2.18.1. the whole error looks like this:
[undefined][2023-06-12 09:34:20,858][INFO] Starting setup server
[undefined][2023-06-12 09:34:20,875][INFO] Generating setup server ssl cert
[ancient-plateau-4428][2023-06-12 09:34:26,484][INFO] Starting server
selinux_context = "none"
[ancient-plateau-4428][2023-06-12 09:34:26,485][INFO] Generating server certificate...
[ancient-plateau-4428][2023-06-12 09:37:39,803][INFO] Starting vpn server
server_id = "6486e75b41761be5a0330eaf"
instance_id = "6486e76341761be5a0330ebf"
instances = []
instances_count = 0
route_count = 1
network = "192.168.237.0/24"
network6 = "fd00:c0a8:ed00::/64"
dynamic_firewall = false
host_id = "4e1aa29eab8b497eaa243f66b02f7e35"
host_address = "192.168.48.2"
host_address6 = null
host_networks = ["192.168.48.0/20"]
cur_timestamp = "2023-06-12 09:37:39.802316"
libipt = false
[ancient-plateau-4428][2023-06-12 09:37:40,683][ERROR] Popen returned error exit code
cmd = ["iptables", "-I", "INPUT", "-i", "tun0", "-j", "ACCEPT", "-m", "comment", "--comment", "pritunl-6486e75b41761be5a0330eaf"]
timeout = 15
return_code = 3
Process stderr:
modprobe: FATAL: Module ip_tables not found in directory /lib/modules/6.1.32-0-lts
iptables v1.6.1: can't initialize iptables table `filter': Table does not exist (do you need to insmod?)
Perhaps iptables or your kernel needs to be upgraded.
Traceback (most recent call last):
File "/usr/lib/python3.6/threading.py", line 884, in _bootstrap
self._bootstrap_inner()
File "/usr/lib/python3.6/threading.py", line 916, in _bootstrap_inner
self.run()
File "/usr/lib/python3.6/threading.py", line 864, in run
self._target(*self._args, **self._kwargs)
File "/usr/lib/pritunl/lib/python3.6/site-packages/pritunl/server/instance.py", line 1582, in _run_thread
self.iptables.upsert_rules()
File "/usr/lib/pritunl/lib/python3.6/site-packages/pritunl/iptables.py", line 1411, in upsert_rules
self._insert_iptables_rule(rule, tables=tables)
File "/usr/lib/pritunl/lib/python3.6/site-packages/pritunl/iptables.py", line 1229, in _insert_iptables_rule
return self._insert_iptables_rule_cmd(rule, ipv6)
File "/usr/lib/pritunl/lib/python3.6/site-packages/pritunl/iptables.py", line 1213, in _insert_iptables_rule_cmd
).run(15)
File "/usr/lib/pritunl/lib/python3.6/site-packages/pritunl/utils/proc.py", line 85, in run
stderr=self._stderrdata,
File "/usr/lib/pritunl/lib/python3.6/site-packages/pritunl/logger/__init__.py", line 55, in error
kwargs['traceback'] = traceback.format_stack()
[ancient-plateau-4428][2023-06-12 09:37:40,686][ERROR] Failed to insert iptables rule, retrying...
rule = ["INPUT", "-i", "tun0", "-j", "ACCEPT", "-m", "comment", "--comment", "pritunl-6486e75b41761be5a0330eaf"]
Traceback (most recent call last):
File "/usr/lib/python3.6/threading.py", line 884, in _bootstrap
self._bootstrap_inner()
File "/usr/lib/python3.6/threading.py", line 916, in _bootstrap_inner
self.run()
File "/usr/lib/python3.6/threading.py", line 864, in run
self._target(*self._args, **self._kwargs)
File "/usr/lib/pritunl/lib/python3.6/site-packages/pritunl/server/instance.py", line 1582, in _run_thread
self.iptables.upsert_rules()
File "/usr/lib/pritunl/lib/python3.6/site-packages/pritunl/iptables.py", line 1411, in upsert_rules
self._insert_iptables_rule(rule, tables=tables)
File "/usr/lib/pritunl/lib/python3.6/site-packages/pritunl/iptables.py", line 1229, in _insert_iptables_rule
return self._insert_iptables_rule_cmd(rule, ipv6)
File "/usr/lib/pritunl/lib/python3.6/site-packages/pritunl/iptables.py", line 1221, in _insert_iptables_rule_cmd
rule=rule,
File "/usr/lib/pritunl/lib/python3.6/site-packages/pritunl/logger/__init__.py", line 55, in error
kwargs['traceback'] = traceback.format_stack()
[ancient-plateau-4428][2023-06-12 09:37:41,216][ERROR] Popen returned error exit code
cmd = ["iptables", "-I", "INPUT", "-i", "tun0", "-j", "ACCEPT", "-m", "comment", "--comment", "pritunl-6486e75b41761be5a0330eaf"]
timeout = 15
return_code = 3
and then it is stuck in a loop
my docker compose file looks like this:
version: '3.4'
services:
pritunl:
container_name: pritunl
image: ghcr.io/jippi/docker-pritunl
restart: unless-stopped
privileged: true
ports:
- '420:443'
- '1194:1194'
- '1194:1194/udp'
dns:
- 1.1.1.1
volumes:
- 'conf:/etc/'
- 'data:/var/lib/pritunl'
- 'db:/var/lib/mongodb'
volumes:
conf:
data:
db:
please help i can provide additional related information just ask.
logs:
[patient-thunder-4691][2023-02-28 14:42:05,478][ERROR] Failed to check notifications
Traceback (most recent call last):
File "/usr/lib/python3.8/urllib/request.py", line 1354, in do_open
h.request(req.get_method(), req.selector, req.data, headers,
File "/usr/lib/python3.8/http/client.py", line 1256, in request
self._send_request(method, url, body, headers, encode_chunked)
File "/usr/lib/python3.8/http/client.py", line 1302, in _send_request
self.endheaders(body, encode_chunked=encode_chunked)
File "/usr/lib/python3.8/http/client.py", line 1251, in endheaders
self._send_output(message_body, encode_chunked=encode_chunked)
File "/usr/lib/python3.8/http/client.py", line 1011, in _send_output
self.send(msg)
File "/usr/lib/python3.8/http/client.py", line 951, in send
self.connect()
File "/usr/lib/python3.8/http/client.py", line 1418, in connect
super().connect()
File "/usr/lib/python3.8/http/client.py", line 922, in connect
self.sock = self._create_connection(
File "/usr/lib/python3.8/socket.py", line 787, in create_connection
for res in getaddrinfo(host, port, 0, SOCK_STREAM):
File "/usr/lib/python3.8/socket.py", line 918, in getaddrinfo
for res in _socket.getaddrinfo(host, port, family, type, proto, flags):
socket.gaierror: [Errno -3] Temporary failure in name resolution
During handling of the above exception, another exception occurred:
Traceback (most recent call last):
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/runners/updates.py", line 25, in _check_updates
response = urllib.request.urlopen(request, timeout=60)
File "/usr/lib/python3.8/urllib/request.py", line 222, in urlopen
return opener.open(url, data, timeout)
File "/usr/lib/python3.8/urllib/request.py", line 525, in open
response = self._open(req, data)
File "/usr/lib/python3.8/urllib/request.py", line 542, in _open
result = self._call_chain(self.handle_open, protocol, protocol +
File "/usr/lib/python3.8/urllib/request.py", line 502, in _call_chain
result = func(*args)
File "/usr/lib/python3.8/urllib/request.py", line 1397, in https_open
return self.do_open(http.client.HTTPSConnection, req,
File "/usr/lib/python3.8/urllib/request.py", line 1357, in do_open
raise URLError(err)
urllib.error.URLError: <urlopen error [Errno -3] Temporary failure in name resolution>
[patient-thunder-4691][2023-02-28 14:42:05,484][WARNING] Failed to get public ip address
[patient-thunder-4691][2023-02-28 14:42:05,703][INFO] Starting server
selinux_context = "none"
[patient-thunder-4691][2023-02-28 14:42:05,703][INFO] Generating server certificate...
[patient-thunder-4691][2023-02-28 14:42:07,222][INFO] Retrying get public ip address
[patient-thunder-4691][2023-02-28 14:42:10,227][INFO] Retrying get public ip address
[patient-thunder-4691][2023-02-28 14:42:13,231][INFO] Retrying get public ip address
[patient-thunder-4691][2023-02-28 14:42:16,233][INFO] Retrying get public ip address
[patient-thunder-4691][2023-02-28 14:42:16,235][WARNING] Failed to get public ip address
[patient-thunder-4691][2023-02-28 14:44:41,007][INFO] Starting vpn server
server_id = "63fda2cd63b1bd184972bd12"
instance_id = "63fda2d963b1bd184972bd27"
instances = []
instances_count = 0
route_count = 1
network = "10.8.0.0/24"
network6 = "fd00:a080::/64"
dynamic_firewall = false
host_id = "add784af049f44bc9a79768b56049f0b"
host_address = "192.168.0.10"
host_address6 = "fe80::c9e5:d139:ca9f:7b83"
host_networks = ["192.168.0.0/22", "172.17.0.0/16"]
cur_timestamp = "2023-02-28 06:44:41.007481"
libipt = false
[patient-thunder-4691][2023-02-28 14:44:41,594][ERROR] Failed to add wg interface
Traceback (most recent call last):
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/server/instance.py", line 1306, in start_wg
utils.check_output_logged([
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/utils/misc.py", line 223, in check_output_logged
raise subprocess.CalledProcessError(
subprocess.CalledProcessError: Command '['ip', 'link', 'add', 'dev', 'wg0', 'type', 'wireguard']' returned non-zero exit status 2.
server_id = "63fda2cd63b1bd184972bd12"
[patient-thunder-4691][2023-02-28 14:44:41,595][ERROR] Popen returned error exit code
cmd = ["ip", "link", "add", "dev", "wg0", "type", "wireguard"]
return_code = 2
Process stderr:
RTNETLINK answers: Operation not supported
Traceback (most recent call last):
File "/usr/lib/python3.8/threading.py", line 890, in _bootstrap
self._bootstrap_inner()
File "/usr/lib/python3.8/threading.py", line 932, in _bootstrap_inner
self.run()
File "/usr/lib/python3.8/threading.py", line 870, in run
self._target(*self._args, **self._kwargs)
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/server/instance.py", line 1650, in _run_thread
self.start_wg()
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/server/instance.py", line 1306, in start_wg
utils.check_output_logged([
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/utils/misc.py", line 216, in check_output_logged
logger.error('Popen returned error exit code', 'utils',
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/logger/init.py", line 55, in error
kwargs['traceback'] = traceback.format_stack()
[patient-thunder-4691][2023-02-28 14:44:41,613][ERROR] Server error occurred while running
Traceback (most recent call last):
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/server/instance.py", line 1650, in _run_thread
self.start_wg()
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/server/instance.py", line 1306, in start_wg
utils.check_output_logged([
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/utils/misc.py", line 223, in check_output_logged
raise subprocess.CalledProcessError(
subprocess.CalledProcessError: Command '['ip', 'link', 'add', 'dev', 'wg0', 'type', 'wireguard']' returned non-zero exit status 2.
server_id = "63fda2cd63b1bd184972bd12"
instance_id = "63fda2d963b1bd184972bd27"
[patient-thunder-4691][2023-02-28 14:44:41,984][ERROR] Failed to stop wg interface
Traceback (most recent call last):
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/server/instance.py", line 1385, in stop_wg
utils.check_output_logged([
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/utils/misc.py", line 223, in check_output_logged
raise subprocess.CalledProcessError(
subprocess.CalledProcessError: Command '['ip', 'link', 'set', 'wg0', 'down']' returned non-zero exit status 1.
server_id = "63fda2cd63b1bd184972bd12"
[patient-thunder-4691][2023-02-28 14:44:41,985][ERROR] Popen returned error exit code
cmd = ["ip", "link", "set", "wg0", "down"]
return_code = 1
Process stderr:
Cannot find device "wg0"
Traceback (most recent call last):
File "/usr/lib/python3.8/threading.py", line 890, in _bootstrap
self._bootstrap_inner()
File "/usr/lib/python3.8/threading.py", line 932, in _bootstrap_inner
self.run()
File "/usr/lib/python3.8/threading.py", line 870, in run
self._target(*self._args, **self._kwargs)
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/server/instance.py", line 1831, in _run_thread
self.stop_wg()
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/server/instance.py", line 1385, in stop_wg
utils.check_output_logged([
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/utils/misc.py", line 216, in check_output_logged
logger.error('Popen returned error exit code', 'utils',
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/logger/init.py", line 55, in error
kwargs['traceback'] = traceback.format_stack()
[patient-thunder-4691][2023-02-28 14:44:42,000][ERROR] Failed to del wg interface
Traceback (most recent call last):
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/server/instance.py", line 1395, in stop_wg
utils.check_output_logged([
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/utils/misc.py", line 223, in check_output_logged
raise subprocess.CalledProcessError(
subprocess.CalledProcessError: Command '['ip', 'link', 'del', 'dev', 'wg0']' returned non-zero exit status 1.
server_id = "63fda2cd63b1bd184972bd12"
[patient-thunder-4691][2023-02-28 14:44:42,001][ERROR] Popen returned error exit code
cmd = ["ip", "link", "del", "dev", "wg0"]
return_code = 1
Process stderr:
Cannot find device "wg0"
Traceback (most recent call last):
File "/usr/lib/python3.8/threading.py", line 890, in _bootstrap
self._bootstrap_inner()
File "/usr/lib/python3.8/threading.py", line 932, in _bootstrap_inner
self.run()
File "/usr/lib/python3.8/threading.py", line 870, in run
self._target(*self._args, **self._kwargs)
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/server/instance.py", line 1831, in _run_thread
self.stop_wg()
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/server/instance.py", line 1395, in stop_wg
utils.check_output_logged([
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/utils/misc.py", line 216, in check_output_logged
logger.error('Popen returned error exit code', 'utils',
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/logger/init.py", line 55, in error
kwargs['traceback'] = traceback.format_stack()
[patient-thunder-4691][2023-02-28 14:45:00,592][INFO] Starting vpn server
server_id = "63fda2cd63b1bd184972bd12"
instance_id = "63fda2ec63b1bd184972bd44"
instances = []
instances_count = 0
route_count = 1
network = "10.8.0.0/24"
network6 = "fd00:a080::/64"
dynamic_firewall = false
host_id = "add784af049f44bc9a79768b56049f0b"
host_address = "192.168.0.10"
host_address6 = "fe80::c9e5:d139:ca9f:7b83"
host_networks = ["192.168.0.0/22", "172.17.0.0/16"]
cur_timestamp = "2023-02-28 06:45:00.591786"
libipt = false
[patient-thunder-4691][2023-02-28 14:45:01,210][ERROR] Failed to add wg interface
Traceback (most recent call last):
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/server/instance.py", line 1306, in start_wg
utils.check_output_logged([
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/utils/misc.py", line 223, in check_output_logged
raise subprocess.CalledProcessError(
subprocess.CalledProcessError: Command '['ip', 'link', 'add', 'dev', 'wg1', 'type', 'wireguard']' returned non-zero exit status 2.
server_id = "63fda2cd63b1bd184972bd12"
[patient-thunder-4691][2023-02-28 14:45:01,211][ERROR] Popen returned error exit code
cmd = ["ip", "link", "add", "dev", "wg1", "type", "wireguard"]
return_code = 2
Process stderr:
RTNETLINK answers: Operation not supported
Traceback (most recent call last):
File "/usr/lib/python3.8/threading.py", line 890, in _bootstrap
self._bootstrap_inner()
File "/usr/lib/python3.8/threading.py", line 932, in _bootstrap_inner
self.run()
File "/usr/lib/python3.8/threading.py", line 870, in run
self._target(*self._args, **self._kwargs)
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/server/instance.py", line 1650, in _run_thread
self.start_wg()
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/server/instance.py", line 1306, in start_wg
utils.check_output_logged([
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/utils/misc.py", line 216, in check_output_logged
logger.error('Popen returned error exit code', 'utils',
File "/usr/lib/pritunl/lib/python3.8/site-packages/pritunl/logger/init.py", line 55, in error
kwargs['traceback'] = traceback.format_stack()
pritunl now add wireguard option but your image does not implement that.
update it please.
It would be really helpful if it would be possible to control where the configuration file is located. That way you could mount a volume at /etc/pritunl
without interfering with the entire /etc
folder. Mounting a volume instead of the config file directly would make it easier to use this image in a docker-compose stack.
Noticed recent builds on dockerhub are failing, tried it myself and saw the same thing. Here's why:
Step 3/9 : RUN locale-gen en_US en_US.UTF-8 && dpkg-reconfigure locales && ln -sf /usr/share/zoneinfo/UTC /etc/localtime && echo 'deb http://repo.mongodb.org/apt/ubuntu xenial/mongodb-org/3.2 multiverse' > /etc/apt/sources.list.d/mongodb-org-3.2.list && echo 'deb http://repo.pritunl.com/stable/apt xenial main' > /etc/apt/sources.list.d/pritunl.list && apt-key adv --keyserver hkp://keyserver.ubuntu.com --recv 42F3E95A2C4F08279C4960ADD68FA50FEA312927 && apt-key adv --keyserver hkp://keyserver.ubuntu.com --recv 7568D9BB55FF9E5287D586017AE645C0CF8E292A && apt-get update -q && apt-get upgrade -y -q && apt-get dist-upgrade -y -q && apt-get -y install pritunl mongodb-org iptables && apt-get clean && apt-get -y -q autoclean && apt-get -y -q autoremove && rm -rf /tmp/*
---> Running in e01856bda59b
/bin/sh: 1: locale-gen: not found
I'll look into it, just wanted to capture the issue first.
finally managed to upgrade mongodb, unfortunately openvpn seems to fail with the latest-focal image, seeing this repeating in the server output:
[thawing-plains-2188] 2022-09-12 13:47:02 ERROR Management socket exception
[thawing-plains-2188] Mon Sep 12 13:47:02 2022 OpenVPN 2.4.7 x86_64-pc-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Mar 22 2022
[thawing-plains-2188] Mon Sep 12 13:47:02 2022 library versions: OpenSSL 1.1.1f 31 Mar 2020, LZO 2.10
[thawing-plains-2188] Mon Sep 12 13:47:02 2022 OpenSSL: error:1408518A:SSL routines:ssl3_ctx_ctrl:dh key too small
[thawing-plains-2188] Mon Sep 12 13:47:02 2022 SSL_CTX_set_tmp_dh
[thawing-plains-2188] Mon Sep 12 13:47:02 2022 Exiting due to fatal error
does that suggest that letsencrypt can't do its thing or the missing /var/lib/pritunl/pritunl.key
and /var/lib/pritunl/pritunl.crt
could be to blame?
ps: can you set pritunl to only use wireguard?
Can we upgrade the Dockerfile such that it installs a recent version?
I followed your docker compose.yaml file and I get this in the logs.. seems I cant get away from this error docker install or not::
mknod: /dev/net/tun: Operation not permitted
Hi! Hello! Could you update the mongo version in your project? Now version - 3.2 .
I need to learn how to backup Mongo Atlas via docker-compose .
Ty
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.