A puppet module for the Unbound caching resolver.
- Debian
- FreeBSD
- OpenBSD
- OS X (macports)
- RHEL clones (with EPEL)
- openSUSE (local repo or obs://server:dns)
To use this moudule, you must be running at least Puppet 4.4. If you are on an older version of Puppet, please use a 1.x version of this module.
To use this module, you must install the puppetlabs/concat
and
puppetlabs/stdlib
modules, either from the forge using puppet module install
, or ensuring the following lines are present in your Puppetfile for an
R10k deployment.
mod 'concat', :git => 'git://github.com/puppetlabs/puppetlabs-concat.git'
mod 'stdlib', :git => 'git://github.com/puppetlabs/puppetlabs-stdlib.git'
At minimum you should setup the interfaces to listen on and allow access to a few subnets. This will tell unbound which interfaces to listen on, and which networks to allow queries from.
class { "unbound":
interface => ["::0","0.0.0.0"],
access => ["10.0.0.0/20","::1"],
}
Or, using hiera
unbound::interface:
- '::0'
- '0.0.0.0'
unbound::access:
- '10.0.0.0/20'
- '::1'
These are zones for which you have an authoritative name server and want to direct queries.
unbound::stub { "lan.example.com":
address => '10.0.0.10',
insecure => true,
}
unbound::stub { "0.0.10.in-addr.arpa.":
address => '10.0.0.10',
insecure => true,
}
# port can be specified
unbound::stub { "0.0.10.in-addr.arpa.":
address => '10.0.0.10@10053',
insecure => true,
}
# address can be an array.
# in the following case, generated conf would be as follows:
#
# stub-host: ns1.example.com
# stub-addr: 10.0.0.10@10053
# stub-host: ns2.example.com
#
# note that conf will be generated in the same order provided.
unbound::stub { "10.0.10.in-addr.arpa.":
address => [ 'ns1.example.com', '10.0.0.10@10053', 'ns2.example.com' ],
}
Or, using hiera
unbound::stub:
'10.0.10.in-addr.arpa.':
address:
- 'ns1.example.com'
- '10.0.0.10@10053'
- 'ns2.example.com'
Unless you have DNSSEC for your private zones, they are considered insecure,
noted by insecure => true
.
For overriding DNS record in zone.
unbound::record { 'test.example.tld':
type => 'A',
content => '10.0.0.1',
ttl => '14400',
}
Or, using hiera
unbound::record:
'test.example.tld':
type: 'A'
content: '10.0.0.1'
ttl: '14400'
Setup a forward zone with a list of address from which you should resolve queries. You can configure a forward zone with something like the following:
unbound::forward { '.':
address => [
'8.8.8.8',
'8.8.4.4'
]
}
Or, using hiera
unbound::forward:
'.':
address:
- '8.8.8.8'
- '8.8.4.4'
This means that your server will use the Google DNS servers for any zones that it doesn't know how to reach and cache the result.
Sets domain name to be insecure, DNSSEC chain of trust is ignored towards the domain name. So a trust anchor above the domain name can not make the domain secure with a DS record, such a DS record is then ignored. Also keys from DLV are ignored for the domain. Can be given multiple times to specify multiple domains that are treated as if unsigned. If you set trust anchors for the domain they override this setting (and the domain is secured).
class {'unbound:'
domain_insecure => ['example.com', example.org']
}
Or, using hiera
unbound::domain_insecure:
- example.com
- example.org
Configure a local zone. The type determines the answer to give if there is no match from local-data. The types are deny, refuse, static, transparent, redirect, nodefault, typetranspar- ent, inform, inform_deny, always_transparent, always_refuse, always_nxdomain. See local-zone in the unbound documentation for more information. You can configure a local-zone with something like the following.
class {'unbound:'
local_zone => { '10.0.10.in-addr.arpa.' => 'nodefault'}
}
Or, using hiera
unbound::local_zone:
10.0.10.in-addr.arpa.: nodefault
11.0.10.in-addr.arpa.: nodefault
class { "unbound":
interface => ["::0","0.0.0.0"],
access => ["10.0.0.0/20", "10.0.0.5/32 reject", "::1 allow_snoop"],
}
The access option allows to pass the action for each subnets, if the action is not provided we assume itβs 'allow'.
class { "unbound":
interface => ["::0","0.0.0.0"],
access => ["10.0.0.0/20","::1"],
custom_server_conf => [ 'include: "/etc/unbound/conf.d/*.conf"' ],
}
The custom_server_conf option allows the addition of arbitrary configuration parameters to your server configuration. It expects an array, and each element gets added to the configuration file on a separate line. In the example above, we instruct Unbound to load other configuration files from a subdirectory.
The Unbound remote controls the use of the unbound-control utility to issue commands to the Unbound daemon process.
class { "unbound::remote":
enable => true,
}
On some platforms this is needed to function correctly for things like service reloads.
In the case you're only building a caching forwarder and don't do iterative lookups you might not want to download the hints file containing the root nameservers because you don't need it, or you also might not be able to download it anyway because your server is firewalled which would cause the module would hang on trying to download the hints file. To skip the download set the skip_roothints_download parameter to true.
class { "unbound":
skip_roothints_download => true,
}
You can find more information about Unbound and its configuration items at unbound.net.
Please help me make this module awesome! Send pull requests and file issues.