can you make it for it can be shown in 12 hour clock, instead of 24 hour clock. You could make Mario throw a shell at the pm\am block every time at noon and midnight.

Hi

I've received my kit from Makerfabs today, flashed the firmware and connected to wifi. The unit appears to be working but the only colour displayed is red and the display is very dim.

Have I missed part of the hardware install as there were no instructions in the box? I've conencted the ESP32 to the port on the left of the unit (as seen from the rear), connected the spade connectors to the ESP32 and using one of the two-headed cables provided.

EDIT: I've just disconnected the 5V lead from the ESP32 to the top of panel 1 and the panel stayed on so not even sure the ESP32 is providing aux power to the panel (if it needs to).

I picked up a Cheap-Yellow-Display and a configurable clock for it would be amazing. The display is 320 x 240, so it should be spot on for a 1:1 (or 1:2 zoom) recreation of Mario. Is something like this feasible? I'd be happy to work with you to get it tested and off the ground.