Ceph is a unified, distributed storage system designed for excellent performance, reliability, and scalability.
The ceph-osd charm deploys the Ceph object storage daemon (OSD) and manages its volumes. It is used in conjunction with the ceph-mon charm. Together, these charms can scale out the amount of storage available in a Ceph cluster.
The list of all possible storage devices for the cluster is defined by the
osd-devices
option (default value is /dev/vdb
). Configuration is typically
provided via a YAML file, like ceph-osd.yaml
. See the following examples:
- Block devices (regular)
ceph-osd:
options:
osd-devices: /dev/vdb /dev/vdc /dev/vdd
Each regular block device must be an absolute path to a device node.
- Block devices (Juju storage)
ceph-osd:
storage:
osd-devices: cinder,20G
See the Juju documentation for guidance on implementing Juju storage.
- Directory-backed OSDs
ceph-osd:
storage:
osd-devices: /var/tmp/osd-1
Note: OSD directories can no longer be created starting with Ceph Nautilus. Existing OSD directories will continue to function after an upgrade to Nautilus.
The list defined by option osd-devices
may affect newly added ceph-osd units
as well as existing units (the option may be modified after units have been
added). The charm will attempt to activate as Ceph storage any listed device
that is visible by the unit's underlying machine. To prevent the activation of
volumes on existing units the blacklist-add-disk
action may be used.
The configuration option is modified in the usual way. For instance, to have it consist solely of devices '/dev/sdb' and '/dev/sdc':
juju config ceph-osd osd-devices='/dev/sdb /dev/sdc'
The charm will go into a blocked state (visible in juju status
output) if it
detects pre-existing data on a device. In this case the operator can either
instruct the charm to ignore the disk (action blacklist-add-disk
) or to have
it purge all data on the disk (action zap-disk
).
A cloud with three MON nodes is a typical design whereas three OSD nodes are considered the minimum. For example, to deploy a Ceph cluster consisting of three OSDs and three MONs:
juju deploy --config ceph-osd.yaml -n 3 ceph-osd
juju deploy --to lxd:0 ceph-mon
juju add-unit --to lxd:1 ceph-mon
juju add-unit --to lxd:2 ceph-mon
juju add-relation ceph-osd ceph-mon
Here, a containerised MON is running alongside each OSD.
Note: Refer to the Install OpenStack page in the OpenStack Charms Deployment Guide for instructions on installing the ceph-osd application for use with OpenStack.
For each ceph-osd unit, the ceph-osd charm will scan for all the devices
configured via the osd-devices
option and attempt to assign to it all the
ones it finds. The cluster's initial pool of available storage is the "sum" of
all these assigned devices.
This charm supports the use of Juju network spaces (Juju
v.2.0
). This feature optionally allows specific types of the application's
network traffic to be bound to subnets that the underlying hardware is
connected to.
Note: Spaces must be configured in the backing cloud prior to deployment.
The ceph-osd charm exposes the following Ceph traffic types (bindings):
- 'public' (front-side)
- 'cluster' (back-side)
For example, providing that spaces 'data-space' and 'cluster-space' exist, the deploy command above could look like this:
juju deploy --config ceph-osd.yaml -n 3 ceph-osd \
--bind "public=data-space cluster=cluster-space"
Alternatively, configuration can be provided as part of a bundle:
ceph-osd:
charm: cs:ceph-osd
num_units: 1
bindings:
public: data-space
cluster: cluster-space
Refer to the Ceph Network Reference to learn about the implications of segregating Ceph network traffic.
Note: Existing ceph-osd units configured with the
ceph-public-network
orceph-cluster-network
options will continue to honour them. Furthermore, these options override any space bindings, if set.
Although AppArmor is not enabled for Ceph by default, an AppArmor profile can
be generated by the charm by assigning a value of 'complain', 'enforce', or
'disable' (the default) to option aa-profile-mode
.
Caution: Enabling an AppArmor profile is disruptive to a running Ceph cluster as all ceph-osd processes must be restarted.
The new profile has a narrow supported use case, and it should always be verified in pre-production against the specific configurations and topologies intended for production.
The profiles generated by the charm should not be used in the following scenarios:
- On any version of Ubuntu older than 16.04
- On any version of Ceph older than Luminous
- When OSD journal devices are in use
- When Ceph BlueStore is enabled
The ceph-osd charm supports encryption for OSD volumes that are backed by block
devices. To use Ceph's native key management framework, available since Ceph
Jewel, set option osd-encrypt
for the ceph-osd charm:
ceph-osd:
options:
osd-encrypt: True
Here, dm-crypt keys are stored in the MON sub-cluster.
Alternatively, since Ceph Luminous, encryption keys can be stored in Vault,
which is deployed and initialised via the vault charm. Set
options osd-encrypt
and osd-encrypt-keymanager
for the ceph-osd charm:
ceph-osd:
options:
osd-encrypt: True
osd-encrypt-keymanager: vault
Important: Post deployment configuration will only affect block devices associated with new ceph-osd units.
This section covers Juju actions supported by the charm. Actions allow specific operations to be performed on a per-unit basis.
Set as 'out' all OSD volumes on a unit.
Warning: This action has the potential of impacting your cluster significantly. The Ceph documentation on this topic is considered essential reading.
The osd-out
action sets all OSDs on the unit as 'out'. Unless the cluster
itself is set to 'noout' this action will cause Ceph to rebalance data by
migrating PGs out of the unit's OSDs and onto OSDs available on other units.
The impact is twofold:
- The available space on the remaining OSDs is reduced. Not only is there less space for future workloads but there is a danger of exceeding the cluster's storage capacity.
- The traffic and CPU load on the cluster is increased.
Note: It has been reported that setting OSDs as 'out' may cause some PGs to get stuck in the 'active+remapped' state. This is an upstream issue.
The ceph-mon charm has an action called set-noout
that sets
'noout' for the cluster.
It may be perfectly fine to have data rebalanced. The decisive factor is whether the OSDs are being paused temporarily (e.g. the underlying machine is scheduled for maintenance) or whether they are being removed from the cluster completely (e.g. the storage hardware is reaching EOL).
Example:
juju run-action --wait ceph-osd/4 osd-out
Set as 'in' all OSD volumes on a unit.
The osd-in
action is reciprocal to the osd-out
action. The OSDs are set to
'in'. It is typically used when the osd-out
action was used in conjunction
with the cluster 'noout' flag.
Example:
juju run-action --wait ceph-osd/4 osd-in
List disks known to a unit.
The list-disks
action lists the unit's block devices by categorising them in
three ways:
-
disks
: visible (known by udev), unused (not mounted), and not designated as an OSD journal (via theosd-journal
configuration option) -
blacklist
: likedisks
but blacklisted (see actionblacklist-add-disk
) -
non-pristine
: likedisks
but not eligible for use due to the presence of existing data
Example:
juju run-action --wait ceph-osd/4 list-disks
Add a disk to a unit.
A ceph-osd unit is automatically assigned OSD volumes based on the current
value of the osd-devices
application option. The add-disk
action allows the
operator to manually add OSD volumes (for disks that are not listed by
osd-devices
) to an existing unit.
Parameters
osd-devices
(required)
A space-separated list of devices to format and initialise as OSD volumes.
bucket
The name of a Ceph bucket to add these devices to.
Example:
juju run-action --wait ceph-osd/4 add-disk osd-devices=/dev/vde
Add a disk to a unit's blacklist.
The blacklist-add-disk
action allows the operator to add disks (that are
visible to the unit's underlying machine) to the unit's blacklist. A
blacklisted device will not be initialised as an OSD volume when the value of
the osd-devices
application option changes. This action does not prevent a
device from being activated via the add-disk
action.
Use the list-disks
action to list the unit's blacklist entries.
Important: This action and blacklist do not have any effect on current OSD volumes.
Parameters
osd-devices
(required)
A space-separated list of devices to add to a unit's blacklist.
Example:
juju run-action --wait ceph-osd/0 \
blacklist-add-disk osd-devices='/dev/vda /dev/vdf'
Remove a disk from a unit's blacklist.
Parameters
osd-devices
(required)
A space-separated list of devices to remove from a unit's blacklist.
Each device should have an existing entry in the unit's blacklist. Use the
list-disks
action to list the unit's blacklist entries.
Example:
juju run-action --wait ceph-osd/1 \
blacklist-remove-disk osd-devices=/dev/vdb
Purge a unit's disk of all data.
In order to prevent unintentional data loss, the charm will not use a disk that
has existing data already on it. To forcibly make a disk available, the
zap-disk
action can be used. Due to the destructive nature of this action the
i-really-mean-it
option must be passed. This action is normally followed by
the add-disk
action.
Parameters
devices
(required)
A space-separated list of devices to be recycled.
i-really-mean-it
(required)
An option that acts as a confirmation for performing the action.
Example:
juju run-action --wait ceph-osd/3 zap-disk i-really-mean-it devices=/dev/vdc
Please report bugs on Launchpad.
For general charm questions refer to the OpenStack Charm Guide.