jr63 / minnazaosd Goto Github PK

[deleted issue]

What steps will reproduce the problem?
1. download the source via SVN
2. put the libaries in the Arduino libaries Folder
3. Open minNAZAOSD with Arduino
4. Compile

What is the expected output? What do you see instead?

See Attached File Log.txt

What version of the product are you using? On what operating system?

Arduino IDE 1.6.5 on Windows 7 64

Please provide any additional information below.

Please HELP! :)

Hi, will this work on DJI A2 GPS?

If not could you give me an light to mod to it?

[deleted issue]

What steps will reproduce the problem?
1. Download the current source from svn repo 
(http://minnazaosd.googlecode.com/svn/trunk/minNAZAOSD)

2. Install Arduino IDE v 1.6.4

3. Add in arduino-1.6.4/libraries the libraries from the minnazaosd svn repo 
(http://minnazaosd.googlecode.com/svn/trunk/libraries)

4. Open from Arduino IDE file: minNAZAOSD.ino

5. Execute from Arduino IDE the compile

What is the expected output? 

I expect to have the hex file generated as compilation completes

What do you see instead?

Compilation hangs usually on ArduCam_Max7456 or on the minNAZAOSD file. No 
error in the IDE console.


What version of the product are you using? 
I'm using the latest source from the svn repo

On what operating system?
I'm arduino IDE 1.6.4 on win7 and linux, with the same result. I also increased 
the max heap size of the IDE with no luck, no trace.

I have also enabled the verbose output from the IDE preferences menu with no 
luck. No trace is done. 

I have also converted to UTF8 both NazaLed.ino and minNAZAOSD.ino with the IDE 
Tools->"Fix encoding and reload"  functionality.


Please provide any additional information below.

I would like to try with the same IDE version that was used to succesfully 
compile the project but I could not find the correct version. 

This request is for setting up a working environment for recompiling the 
minnazaosd source.

Thanks,

Stefano Falconetti.

What steps will reproduce the problem?
1. I use 3 positions switch on futaba remote to select screen
2. at position 1, every thing okay 
3. at position 2, it stay at the same screen as position 1 and works fine
4. at position 3, which the screen should turn off but osd still there and 
almost freeze

What is the expected output? What do you see instead?
all screens should work fine but not

What version of the product are you using? On what operating system?
-MINNAZAOSD 0.0.1 ARSSI
-Minim OSD v1.1 - Hobbyking
-computer: dell window7

Please provide any additional information below.
I tried to re-flash the firmware but the problem still there. 

Please the video. In the video the RSSI and current sensor have not connected. 
2:53 -> screen 2 - some display should disappear but not
3:20 -> screen 3 - osd should turn off but not
3:53 -> screen 1 - every thing up and work fine
http://www.youtube.com/watch?v=td40tnms42k

Hello, I have a problem with the RTH, it makes me fall the naza, even I can see 
the coordinates... what could be the problem? Thanks

[deleted issue]

How can I download all the source code in one file?