analog inputs
Required hardware
- Arduino Uno
- 5 jumper cables
- 1 LED
- 2 220ohm 5.
- Bread board Download Arduino IDE from the link below https://www.arduino.cc/en/Main/OldSoftwareReleases#previous Unzipped the folder Open the IDE Select the appropriate board option from within the tools-board on the menu bar Select the appropriate COM Port from within the tools-port on the menu bar Download the code from this repository open the anolog_input.ino file make sure your computer is connected to the arduino via the cable Hook up the hardware as shown below
Servo required hardware
- Arduino Uno
- 3 male to male jumper cable
- 1 servo
follow the steps stated above
hook up the hardware as shown below
make sure that your arduino Serial monitor is off before running the python app LM35 TEMPERATURE SENSOR
download servo.ino and run it on arduino Serial Communication required hardware
- Arduino Uno
- 3 male to male jumper cable
- 1 potentiometer make sure python is installed on your laptop follow the steps stated above download SerialUsingPot.ino and run it with arduino and SerialUsingPot.py and this with python then hook up sensor as below
follow the follwoing steps in the link below to install python
https://phoenixnap.com/kb/how-to-install-python-3-windows LCD DISPLAY required hardware
- Arduino Uno
- 12 male to male jumper cable
- 1 potentiometer
- 16x2 LCD display connect the circuit as below