Giter VIP home page Giter VIP logo

church.jl's People

Contributors

laurencea avatar

Stargazers

 avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar  avatar

Watchers

 avatar  avatar  avatar  avatar  avatar

church.jl's Issues

[PackageEvaluator.jl] Your package Church may have a testing issue.

This issue is being filed by a script, but if you reply, I will see it.

PackageEvaluator.jl is a script that runs nightly. It attempts to load all Julia packages and run their test (if available) on both the stable version of Julia (0.2) and the nightly build of the unstable version (0.3).

The results of this script are used to generate a package listing enhanced with testing results.

The status of this package, Church, on...

  • Julia 0.2 is 'Tests pass.' PackageEvaluator.jl
  • Julia 0.3 is 'Tests fail, but package loads.' PackageEvaluator.jl

'No tests, but package loads.' can be due to their being no tests (you should write some if you can!) but can also be due to PackageEvaluator not being able to find your tests. Consider adding a test/runtests.jl file.

'Package doesn't load.' is the worst-case scenario. Sometimes this arises because your package doesn't have BinDeps support, or needs something that can't be installed with BinDeps. If this is the case for your package, please file an issue and an exception can be made so your package will not be tested.

This automatically filed issue is a one-off message. Starting soon, issues will only be filed when the testing status of your package changes in a negative direction (gets worse). If you'd like to opt-out of these status-change messages, reply to this message.

Info about upcoming removal of packages in the General registry

As described in https://discourse.julialang.org/t/ann-plans-for-removing-packages-that-do-not-yet-support-1-0-from-the-general-registry/ we are planning on removing packages that do not support 1.0 from the General registry. This package has been detected to not support 1.0 and is thus slated to be removed. The removal of packages from the registry will happen approximately a month after this issue is open.

To transition to the new Pkg system using Project.toml, see https://github.com/JuliaRegistries/Registrator.jl#transitioning-from-require-to-projecttoml.
To then tag a new version of the package, see https://github.com/JuliaRegistries/Registrator.jl#via-the-github-app.

If you believe this package has erroneously been detected as not supporting 1.0 or have any other questions, don't hesitate to discuss it here or in the thread linked at the top of this post.

[PkgEval] Your package doesn't have a test/runtests.jl file

PackageEvaluator.jl is a script that runs nightly.
It attempts to load all Julia packages and run their tests (if available) on both the stable
version of Julia (0.3) and the nightly build of the unstable version (0.4).
The results of this script are used to generate a package listing
enhanced with testing results. This service also benefits package developers by notifying them if
their package breaks for some reason (caused by e.g. changes in Julia, changes in dependencies,
or broken binary dependencies.)

Currently PackageEvaluator attempts to find your test scripts using a heuristic, preferring the
standarized test/runtests.jl whenever present. Using test/runtests.jl allows people to test
your package using simply Pkg.test("Church"), with any testing-only dependencies being
installed by looking at test/REQUIRE.

Your package doesn't appear to have a test/runtests.jl file. PackageEvaluator is going to move
away from auto-detecting tests and will instead only test packages with a test/runtests.jl
file. This change will take place in about a month.

You can:

  • Add the file and tag a new version. You may in fact have already added this file but not
    tagged a new version. PackageEvaluator only tests your latest tagged verison, so you must tag
    for the file to be detected.
  • Chose to do nothing. PackageEvaluator will stop attempting to test your package, and the testing
    status will be reported as "not possible".

If you'd like help or more information, please just reply to this issue.

Reify trace information

Great project!

It seems that you are currently storing some data about the current state (execution trace) in global variables samples, dets, getindexes, and condition. Have you considered using a more local trace object instead that groups this information and anything else that may be part of the state?

This would make the design more modular, and would help with use cases such as copying/serializing the state (e.g., to resume sampling later on), and running multiple different models concurrently within a single file.

[PkgEval] Church may have a testing issue on Julia 0.3 (2014-07-15)

PackageEvaluator.jl is a script that runs nightly. It attempts to load all Julia packages and run their tests (if available) on both the stable version of Julia (0.2) and the nightly build of the unstable version (0.3). The results of this script are used to generate a package listing enhanced with testing results.

On Julia 0.3

  • On 2014-07-14 the testing status was Tests fail, but package loads.
  • On 2014-07-15 the testing status changed to Package doesn't load.

Tests fail, but package loads. means that PackageEvaluator found the tests for your package, executed them, and they didn't pass. However, trying to load your package with using worked.

Package doesn't load. means that PackageEvaluator did not find tests for your package. Additionally, trying to load your package with using failed.

This issue was filed because your testing status became worse. No additional issues will be filed if your package remains in this state, and no issue will be filed if it improves. If you'd like to opt-out of these status-change messages, reply to this message saying you'd like to and @IainNZ will add an exception. If you'd like to discuss PackageEvaluator.jl please file an issue at the repository. For example, your package may be untestable on the test machine due to a dependency - an exception can be added.

Test log:

INFO: Installing ArrayViews v0.4.6
INFO: Installing Church v0.0.1
INFO: Installing Distributions v0.5.2
INFO: Installing PDMats v0.2.1
INFO: Installing StatsBase v0.5.3
INFO: Package database updated
ERROR: NumericExtensions not found
 in require at loading.jl:47
 in include at ./boot.jl:245
 in include_from_node1 at ./loading.jl:128
 in reload_path at loading.jl:152
 in _require at loading.jl:67
 in require at loading.jl:54
 in include at ./boot.jl:245
 in include_from_node1 at ./loading.jl:128
 in reload_path at loading.jl:152
 in _require at loading.jl:67
 in require at loading.jl:54
 in include at ./boot.jl:245
 in include_from_node1 at ./loading.jl:128
 in reload_path at loading.jl:152
 in _require at loading.jl:67
 in require at loading.jl:51
 in include at ./boot.jl:245
 in include_from_node1 at loading.jl:128
 in process_options at ./client.jl:285
 in _start at ./client.jl:354
while loading /home/idunning/pkgtest/.julia/v0.3/PDMats/src/PDMats.jl, in expression starting on line 9
while loading /home/idunning/pkgtest/.julia/v0.3/Distributions/src/Distributions.jl, in expression starting on line 4
while loading /home/idunning/pkgtest/.julia/v0.3/Church/src/Church.jl, in expression starting on line 2
while loading /home/idunning/pkgtest/.julia/v0.3/Church/testusing.jl, in expression starting on line 1
INFO: Package database updated

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    ๐Ÿ–– Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. ๐Ÿ“Š๐Ÿ“ˆ๐ŸŽ‰

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google โค๏ธ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.