Thanks to @Serrj for instruction how to enable Telnet on old firmwares. And thanks to an unknown researcher for instruction how to open telnet on new firmwares.
Note: Use another integrations for support:
- Xiaomi Gateway 2 (DGNWG02LM) - external link
- Xiaomi Gateway EU (DGNWG05LM), Aqara Hub (ZHWG11LM) - external link
- Aqara G2H (ZNSXJ12LM), Aqara H1 CN (QBCZWG11LM), Aqara M1S CN (ZHWG15LM), Aqara M2 CN (ZHWG12LM), Aqara P3 CN (KTBL12LM) - external link
Q. Does this integration support Xiaomi Robot Vacuum, Xiaomi Philips Bulb...?
A. No. The integration does not support Xiaomi Wi-Fi devices.
Q. Which Mi Home region is best to use?
A. Most devices are supported in the China region. In European regions may not work new Zigbee devices E1/H1/T1-series and some Mesh devices. Read more about regional restrictions.
Q. What means multimode gateway beeps?
A. Beeps AFTER adding Zigbee devices:
- No new devices found, the pair is stopped.
- New device successfully added.
- Unsupported device model.
Also, if you using hacked motion sensor - the gateway will periodically beeps. You can disable it in integration settings.
Q. Does the integration work without internet?
A. Partially. The component connects to a hub on the local network. Zigbee devices work without internet. But adding new Zigbee devices to Mi Home requires Internet. Updating BLE device data may not work without Internet.
Q. Does the integration support non Xiaomi Zigbee devices?
A. Yes. There are three ways to connect third party Zigbee devices. All methods have a different set of supported devices. There is no exact supported list. Don't expect absolutely every device on the market to be supported in any of these methods.
Q. Will the Zigbee devices continue to work in Mi Home?
A. Yes. If you do not enable ZHA or z2m mode, the devices will continue to work in Mi Home. And you can use automation in both Mi Home and Hass.
Q. Do I need to receive a token or enable Telnet manually?
A. No. The token is obtained automatically using the login / password from the Mi Home account. Telnet turns on automatically using token.
Q. Should I open or solder the hub?
A. No. Read supported firmwares section.
Q. Should I use ZHA mode?
A. You decide. If all of your Zigbee devices are supported in Mi Home, it is best to use it. If you have two hubs - you can use one of them in Mi Home mode, and the second in ZHA mode. Or you can also use the hub in Mi Home mode with Xiaomi devices and a Zigbee USB Dongle for other Zigbee devices.
Q. How many Zigbee devices does the hub support?
A. The hub can connect directly up to 32 battery-powered devices (end devices). And additionaly up to 26 powered devices (routers). Other devices on your network can work through routers. The maximum number of devices is unknown. Official Xiaomi documentation writes about 128 devices.
Q. Why does the two-button switch only have one entity action?
A. All button clicks are displayed in the status of that one entity.
Component support original gateway firmware. You do not need to manually open, solder and flash the devices.
Maintain firmware: v1.5.0_0102
. You should use custom open telnet command
If you have problems with other firmware, don't even ask to fix it. The component can work with these firmware versions, but they may have bugs: v1.4.7_0063, v1.4.7_0065, v1.4.7_0115, v1.4.7_0160, v1.5.0_0026, v1.5.1_0032.
If your Mi Home doesn't offer to you new firmware - you can update using telnet.
Component can block fw updates with Lock Firmware function. Mi Home app will continue to offer you update. But won't be able to install it. It should fail at 0%.
Additionally, the integration supports custom firmware. The custom firmware works the same way as the original firmware and will not give you new features or support for new devices.
Device | MiHome EU | MiHome CN | Vevs EU | Vevs CN |
---|---|---|---|---|
Gateway 3 (CN and EU) | supported | supported | supported | supported |
Zigbee old series | supported | supported | supported | supported |
Zigbee E1 series (CN and EU) | no | supported | no | supported |
Zigbee H1 and T1 series (CN and EU) | no | partially | no | some models |
Bluetooth BLE and Mesh | some models | supported | supported | supported |
Xiaomi Mijia Smart Multi-Mode Gateway has two models - ZNDMWG03LM
(China) and ZNDMWG02LM
/YTC4044GL
(Euro). Both this models can be added to China or to Euro cloud servers.
PS. This is the ONLY Xiaomi/Aqara gateway that has the same internal model for the China and Euro versions - lumi.gateway.mgl03
. So the Hass component and the Xiaomi cloud servers see no difference between the models.
Most older Xiaomi/Aqara Zigbee devices can also be added to China and to Euro cloud servers.
New Zigbee devices from E1 series can be added ONLY to China cloud servers. They supported in official Mi Home application.
New Zigbee devices from H1 and T1 series are not officially supported in Mi Home. But they can be added ONLY to China cloud servers. You can controll them from Hass (check supported list) but not from stock Mi Home application. Some of this model (mostly H1 switches and T1 relays) can be controlled from Mi Home by Vevs.
Some of Bluetooth BLE and Mesh can be added ONLY to China cloud. But with Mi Home by Vevs they can be added to any cloud.
PS. You can't add Zigbee devices E1/H1/T1 to Euro cloud even with Mi Home by Vevs.
If you control your devices from Home Assistant - it makes absolutely no difference which cloud they are added to. Devices are controlled locally and without delay in any case.
PS. Some Aqara devices are not supported at all in Mi Home in any version, e.g. Aqara Door Lock N100 Zigbee version.
The integration can work in two modes:
1. Mi Home (default)
- Support Xiaomi/Aqara Zigbee devices simultaneously in Mi Home and Hass
- Support some Zigbee devices from other brands only in Hass
- Support Xiaomi BLE devices simultaneously in Mi Home and Hass
- Support Xiaomi Mesh devices simultaneously in Mi Home and Hass
2. Zigbee Home Automation (ZHA)
- Support for Zigbee devices of hundreds of brands only in Hass
- Support Xiaomi BLE devices simultaneously in Mi Home and Hass
- Support Xiaomi Mesh devices simultaneously in Mi Home and Hass
Zigbee devices in ZHA mode doesn't controlled by this integration!
Other Zigbee, BLE and Mesh devices not from the list below also may work with limited support of functionality.
Some BLE devices have no known default entities (asterisk in the list). Their entities appear when receiving data from the devices.
Some BLE devices may or may not have battery data depending on the device firmware.
Gateway entity shows connection state to gateway. It has many useful information in attributes.
Zigbee and BLE devices has optional zigbee
and ble
that shows last_seen
time in state and may useful intormation in attributes.
Every device has support level (column S):
- 5 - The device can do everything it can do
- 4 - The device works well, missing some settings
- 3 - The device works, but it is missing some functionality
- empty - Unknown level, but device may work well
- 1/2 - The device doesn't work well (they don't show in the table)
You can change the operation of an existing device or add support for any Xiaomi Zigbee, Xiaomi BLE, Xiaomi Mesh or any other brand Zigbee device by writing an external converter.
It is welcomed if you return a working converter to integration. You can create an issue or make a pull request.
Total devices: 2
Brand | Name | Model | Entities | S |
---|---|---|---|---|
Aqara | Hub E1 CN | ZHWG16LM | command, data, gateway | 3 |
Xiaomi | Gateway 3 | ZNDMWG03LM ZNDMWG02LM | alarm, command, data, cloud_link, led, gateway | 4 |
Total devices: 82
Brand | Name | Model | Entities | S |
---|---|---|---|---|
Aqara | Air Quality Monitor CN | VOCKQJK11LM | temperature, humidity, tvoc, battery, battery_low, display_unit | |
Aqara | Bulb CN | ZNLDP12LM | light, power_on_state | |
Aqara | Button CN | WXKG11LM | action, battery, battery_low, chip_temperature | |
Aqara | Cube EU | MFKZQ01LM | action, battery | 5 |
Aqara | Curtain | ZNCLDJ11LM | motor | |
Aqara | Curtain B1 EU | ZNCLDJ12LM | motor, battery | |
Aqara | Door Lock S1 | ZNMS11LM | square, reverse, latch, battery, key_id | |
Aqara | Door Lock S2 CN | ZNMS12LM | square, reverse, latch, battery, key_id | |
Aqara | Door Lock S2 Pro CN | ZNMS13LM | lock, square, reverse, latch, battery, action | |
Aqara | Door/Window Sensor | MCCGQ11LM | contact, battery, battery_low, chip_temperature | |
Aqara | Door/Window Sensor E1 CN | MCCGQ14LM | contact, battery, battery_low | |
Aqara | Double Wall Button | WXKG02LM | action, battery, battery_low, chip_temperature | |
Aqara | Double Wall Button D1 CN | WXKG07LM | action, battery, battery_low, chip_temperature | |
Aqara | Double Wall Button E1 CN | WXKG17LM | action, battery | |
Aqara | Double Wall Button H1 | WRS-R02 | action, battery, battery_low, mode | |
Aqara | Double Wall Switch | QBKG12LM | channel_1, channel_2, power, energy, action, wireless_1, wireless_2, power_on_state, led | |
Aqara | Double Wall Switch (no N) | QBKG03LM | channel_1, channel_2, action, wireless_1, wireless_2, led | |
Aqara | Double Wall Switch D1 CN (no N) | QBKG22LM | channel_1, channel_2, action, wireless_1, wireless_2, led | |
Aqara | Double Wall Switch D1 CN (with N) | QBKG24LM | channel_1, channel_2, power, energy, action, wireless_1, wireless_2, power_on_state, led | |
Aqara | Double Wall Switch E1 (no N) | QBKG39LM | channel_1, channel_2, action, wireless_1, wireless_2, led, power_on_state, mode | |
Aqara | Double Wall Switch E1 (with N) | QBKG41LM | channel_1, channel_2, action, led, led_reverse, power_on_state, wireless_1, wireless_2 | |
Aqara | Double Wall Switch H1 CN (no N) | QBKG28LM | channel_1, channel_2, action, led, power_on_state, wireless_1, wireless_2 | |
Aqara | Double Wall Switch H1 CN (with N) | QBKG31LM | channel_1, channel_2, energy, power, action, led, led_reverse, power_on_state, wireless_1, wireless_2 | |
Aqara | Double Wall Switch H1 EU (no N) | WS-EUK02 | channel_1, channel_2, action, led, power_on_state, wireless_1, wireless_2 | |
Aqara | Double Wall Switch H1 EU (with N) | WS-EUK04 | channel_1, channel_2, energy, power, action, led, led_reverse, power_on_state, wireless_1, wireless_2 | |
Aqara | Double Wall Switch US (with N) | WS-USC04 | channel_1, channel_2, action, energy, power, led, power_on_state, wireless_1, wireless_2 | |
Aqara | Motion Sensor | RTCGQ11LM | motion, illuminance, battery | |
Aqara | Opple Four Button CN | WXCJKG12LM | mode, action, battery, battery_low, chip_temperature | |
Aqara | Opple MX480 CN | XDD13LM | light | |
Aqara | Opple MX650 CN | XDD12LM | light | |
Aqara | Opple Six Button CN | WXCJKG13LM | mode, action, battery, battery_low, chip_temperature | |
Aqara | Opple Two Button CN | WXCJKG11LM | mode, action, battery, battery_low, chip_temperature | |
Aqara | Plug EU | SP-EUC01 | plug, energy, power, led, power_on_state | |
Aqara | Precision Motion Sensor EU | RTCGQ13LM | motion, battery, sensitivity, blind_time, battery_low, idle_time | |
Aqara | Relay CN | LLKZMK11LM | channel_1, channel_2, current, power, voltage, energy, action, chip_temperature, interlock | 4 |
Aqara | Relay T1 CN (with N) | DLKZMK11LM | switch, energy, power, led, power_on_state | |
Aqara | Relay T1 EU (no N) | SSM-U02 | switch, chip_temperature | |
Aqara | Relay T1 EU (with N) | SSM-U01 | switch, energy, power, led, power_on_state | |
Aqara | Roller Shade | ZNGZDJ11LM | motor | |
Aqara | Roller Shade E1 CN | ZNJLBL01LM | motor, battery, motor_reverse, battery_low, battery_voltage, battery_charging, motor_speed | |
Aqara | Shake Button | WXKG12LM | action, battery, battery_low, chip_temperature | |
Aqara | Single Wall Button CN | WXKG03LM | action, battery, battery_low, chip_temperature | |
Aqara | Single Wall Button D1 CN | WXKG06LM | action, battery, battery_low, chip_temperature | |
Aqara | Single Wall Button E1 CN | WXKG16LM | action, battery | |
Aqara | Single Wall Switch | QBKG04LM | switch, action, wireless, led | |
Aqara | Single Wall Switch | QBKG11LM | switch, power, energy, action, wireless, led | |
Aqara | Single Wall Switch D1 CN (no N) | QBKG21LM | switch, action, wireless, led | |
Aqara | Single Wall Switch D1 CN (with N) | QBKG23LM | switch, power, energy, action, wireless, led | |
Aqara | Single Wall Switch E1 (no N) | QBKG38LM | switch, action, led, power_on_state, wireless, mode | |
Aqara | Single Wall Switch E1 (with N) | QBKG40LM | switch, action, led, led_reverse, power_on_state, wireless | |
Aqara | Single Wall Switch H1 CN (no N) | QBKG27LM | switch, action, led, power_on_state, wireless | |
Aqara | Single Wall Switch H1 CN (with N) | QBKG30LM | switch, energy, power, action, led, led_reverse, power_on_state, wireless | |
Aqara | Single Wall Switch H1 EU (no N) | WS-EUK01 | switch, action, led, power_on_state, wireless | |
Aqara | Single Wall Switch H1 EU (with N) | WS-EUK03 | switch, energy, power, action, led, led_reverse, power_on_state, wireless | |
Aqara | TH Sensor | WSDCGQ11LM | temperature, humidity, battery, pressure | |
Aqara | TH Sensor T1 | WSDCGQ12LM | temperature, humidity, pressure, battery, battery_low | |
Aqara | Thermostat S2 CN | KTWKQ03ES | climate | |
Aqara | Triple Wall Switch D1 CN (no N) | QBKG25LM | channel_1, channel_2, channel_3, action, wireless_1, wireless_2, wireless_3, power_on_state, led | |
Aqara | Triple Wall Switch D1 CN (with N) | QBKG26LM | channel_1, channel_2, channel_3, power, voltage, energy, action, wireless_1, wireless_2, wireless_3, power_on_state, led | |
Aqara | Triple Wall Switch H1 CN (no N) | QBKG29LM | channel_1, channel_2, channel_3, action, led, power_on_state, wireless_1, wireless_2, wireless_3 | |
Aqara | Triple Wall Switch H1 CN (with N) | QBKG32LM | channel_1, channel_2, channel_3, energy, power, action, led, led_reverse, power_on_state, wireless_1, wireless_2, wireless_3 | |
Aqara | Vibration Sensor | DJT11LM | action, battery, battery_low | 3 |
Aqara | Wall Outlet | QBCZ11LM | outlet, power, energy, chip_temperature, power_on_state, charge_protect, led, wireless | |
Aqara | Water Leak Sensor | SJCGQ11LM | moisture, battery | |
Honeywell | Gas Sensor | JTQJ-BF-01LM/BW | gas_density, gas, sensitivity | 4 |
Honeywell | Smoke Sensor | JTYJ-GD-01LM/BW | smoke_density, smoke, battery | |
IKEA | Bulb E14 400 lm | LED1536G5 | light | |
IKEA | Bulb E14 400 lm | LED1649C5 | light | |
IKEA | Bulb E27 1000 lm | LED1623G12 | light | |
IKEA | Bulb E27 950 lm | LED1546G12 | light | |
IKEA | Bulb E27 980 lm | LED1545G12 | light | |
IKEA | Bulb GU10 400 lm | LED1537R6 | light | |
IKEA | Bulb GU10 400 lm | LED1650R5 | light | |
Xiaomi | Button | WXKG01LM | action, battery, battery_low, chip_temperature | |
Xiaomi | Door/Window Sensor | MCCGQ01LM | contact, battery, battery_low, chip_temperature | |
Xiaomi | Light Sensor EU | GZCGQ01LM | illuminance, battery | |
Xiaomi | Motion Sensor | RTCGQ01LM | motion, battery, battery_low, chip_temperature | |
Xiaomi | Plug CN | ZNCZ02LM | plug, power, energy, chip_temperature, power_on_state, charge_protect, led | 5 |
Xiaomi | Plug EU | ZNCZ04LM | plug, power, voltage, energy | |
Xiaomi | Plug TW | ZNCZ03LM | plug, power, energy, chip_temperature, power_on_state, charge_protect, led | 5 |
Xiaomi | Plug US | ZNCZ12LM | plug, power, energy, chip_temperature, power_on_state, charge_protect, led | 5 |
Xiaomi | TH Sensor | WSDCGQ01LM | temperature, humidity, battery, battery_low, chip_temperature |
Total devices: 17
Brand | Name | Model | Entities | S |
---|---|---|---|---|
BlitzWolf | Plug | BW-SHP13 | plug, voltage, current, power, energy, power_on_state | 5 |
IKEA | Bulb E27 1000 lm | LED1623G12 | light | 3 |
IKEA | Bulb E27 806 lm | LED1836G9 | light | 3 |
Ksentry Electronics | OnOff Controller | KS-SM001 | switch | |
Lonsonho | Switch w/o neutral | TS0011 | switch | 5 |
Neo | Power Plug | NAS-WR01B | plug, voltage, current, power, energy, power_on_state, led, child_mode, mode | 5 |
Philips | Hue motion sensor | 9290012607 | occupancy, illuminance, temperature, battery, occupancy_timeout | 4 |
Sonoff | Button | SNZB-01 | action, battery | 5 |
Sonoff | Door/Window Sensor | SNZB-04 | contact, battery | 5 |
Sonoff | Mini | ZBMINI | switch | 5 |
Sonoff | Motion Sensor | SNZB-03 | occupancy, battery | 5 |
Sonoff | TH Sensor | SNZB-02 | temperature, humidity, battery | |
Tuya | Relay | TS0001 | switch, power_on_state | 4 |
Tuya | Relay | TS0002 | channel_1, channel_2, power_on_state, mode | 3 |
Unknown | Dimmer | LXZ8-02A | light | 3 |
UseeLink | Power Strip | SM-SO306E | channel_1, channel_2, channel_3, channel_4, usb, power_on_state | 5 |
eWeLink | Zigbee OnOff Controller | SA-003-Zigbee | switch | 5 |
Total devices: 33
Brand | Name | Model | Entities | S |
---|---|---|---|---|
Aqara | Door Lock D100 | ZNMS20LM | * | |
Aqara | Door Lock N100 (Bluetooth) | ZNMS16LM | * | |
Aqara | Door Lock N200 | ZNMS17LM | * | |
Honeywell | Smoke Alarm | JTYJ-GD-03MI | action, smoke, battery | |
Loock | Door Lock Classic 2X Pro | loock.lock.cc2xpro | * | |
Unknown | Lock M2 | ydhome.lock.m2silver | * | |
Xiaomi | Alarm Clock | CGD1 | temperature, humidity, battery* | |
Xiaomi | Door Lock | MJZNMS02LM | * | |
Xiaomi | Door Lock | MJZNMS03LM | * | |
Xiaomi | Door Lock | XMZNMST02YD | * | |
Xiaomi | Door/Window Sensor 2 | MCCGQ02HL | contact, light, battery | |
Xiaomi | Flower Care | HHCCJCY01 | temperature, moisture, conductivity, illuminance, battery* | |
Xiaomi | Flower Pot | HHCCPOT002 | moisture, conductivity, battery* | |
Xiaomi | Kettle | YM-K1501 | power, temperature | |
Xiaomi | Magic Cube | XMMF01JQD | action | |
Xiaomi | Mosquito Repellent | WX08ZM | * | |
Xiaomi | Motion Sensor 2 | RTCGQ02LM | motion, light, battery, action, idle_time | |
Xiaomi | Night Light 2 | MJYD02YL-A | battery, light, motion, idle_time | |
Xiaomi | Qingping Door Sensor | CGH1 | * | |
Xiaomi | Qingping Motion Sensor | CGPR1 | motion, light, illuminance, battery, idle_time | |
Xiaomi | Qingping TH Lite | CGDK2 | temperature, humidity, battery* | |
Xiaomi | Qingping TH Sensor | CGG1 | temperature, humidity, battery* | |
Xiaomi | Safe Box | BGX-5/X1-3001 | * | |
Xiaomi | TH Clock | LYWSD02MMC | temperature, humidity, battery* | |
Xiaomi | TH Sensor | LYWSDCGQ/01ZM | temperature, humidity, battery* | |
Xiaomi | TH Sensor | XMWSDJ04MMC | temperature, humidity, battery* | |
Xiaomi | TH Sensor 2 | LYWSD03MMC | temperature, humidity, battery* | |
Xiaomi | Toothbrush T500 | MES601 | * | |
Xiaomi | Viomi Kettle | V-SK152 | power, temperature | |
Xiaomi | Water Leak Sensor | SJWS01LM | water_leak, battery, action | |
Xiaomi | ZenMeasure Clock | MHO-C303 | temperature, humidity, battery* | |
Xiaomi | ZenMeasure TH | MHO-C401 | temperature, humidity, battery* | |
Yeelight | Button S1 | YLAI003 | action, battery |
Total devices: 32
Brand | Name | Model | Entities | S |
---|---|---|---|---|
LeMesh | Mesh Downlight | lemesh.light.wy0c05 | light | |
LeMesh | Mesh Light | lemesh.light.wy0c08 | light | |
LeMesh | Mesh Light (RF ready) | lemesh.light.wy0c02 | light | |
LeMesh | Mesh Light (RF ready) | lemesh.light.wy0c07 | light | |
PTX | Mesh Double Wall Switch | PTX-SK2M | channel_1, channel_2, led, wireless_1, wireless_2 | |
PTX | Mesh Downlight | 090615.light.mlig01 | light | |
PTX | Mesh Single Wall Switch | PTX-SK1M | switch, led, wireless | |
PTX | Mesh Triple Wall Switch | PTX-SK3M | channel_1, channel_2, channel_3, led, wireless_1, wireless_2, wireless_3 | |
PTX | Mesh Triple Wall Switch | PTX-TK3/M | channel_1, channel_2, channel_3, led, wireless_1, wireless_2, wireless_3 | |
Unknown | Mesh Lightstrip (RF ready) | crzm.light.wy0a01 | light | |
Unknown | Mesh Switch | dwdz.switch.sw0a01 | switch | |
Unknown | Mesh Switch Controller | lemesh.switch.sw0a01 | switch | |
Unknown | Mesh Switch Controller | lemesh.switch.sw0a02 | switch | |
Unknown | Mesh Wall Switch | DHKG01ZM | switch, led | |
Xiaomi | Electrical Outlet | ZNCZ01ZM | outlet, power, led, power_protect, power_value | |
Xiaomi | Mesh Bulb | MJDP09YL | light, flex_switch, power_on_state | 4 |
Xiaomi | Mesh Double Wall Switch | DHKG02ZM | channel_1, channel_2, led, wireless_1, wireless_2 | |
Xiaomi | Mesh Double Wall Switch | ZNKG02HL | channel_1, channel_2, humidity, temperature | |
Xiaomi | Mesh Downlight | MJTS01YL/MJTS003 | light, flex_switch, power_on_state | 4 |
Xiaomi | Mesh Group | yeelink.light.mb1grp | group | 4 |
Xiaomi | Mesh Night Light | MJYD05YL | switch, light | |
Xiaomi | Mesh Single Wall Switch | ZNKG01HL | switch, humidity, temperature | |
Xiaomi | Mesh Triple Wall Switch | ZNKG03HL/ISA-KG03HL | channel_1, channel_2, channel_3, humidity, temperature, wireless_1, wireless_2, wireless_3, baby_mode | |
Xiaomi | Mosquito Repeller 2 | WX10ZM | switch, battery, supply, led, power_mode | |
XinGuang | Mesh Switch | wainft.switch.sw0a01 | switch | |
XinGuang | Smart Light | LIBMDA09X | light | |
Yeelight | Mesh Bulb E14 | YLDP09YL | light, flex_switch, power_on_state | 4 |
Yeelight | Mesh Bulb E27 | YLDP10YL | light, flex_switch, power_on_state | 4 |
Yeelight | Mesh Bulb M2 | YLDP25YL/YLDP26YL | light, flex_switch, power_on_state | 4 |
Yeelight | Mesh Downlight | YLSD01YL | light, flex_switch, power_on_state | 4 |
Yeelight | Mesh Downlight M2 | YLTS02YL/YLTS04YL | light, flex_switch, power_on_state | 4 |
Yeelight | Mesh Spotlight | YLSD04YL | light, flex_switch, power_on_state | 4 |
Video DEMO
Method 1. HACS:
HACS > Integrations > Plus > XiaomiGateway3 > Install
Method 2. Manually copy xiaomi_gateway3
folder from latest release to /config/custom_components
folder.
Video DEMO
Configuration > Integrations > Add Integration > **Xiaomi Gateway3 **
If the integration is not in the list, you need to clear the browser cache.
You need to install integration two times:
- Cloud version. It used ONLY to load tokens and names for your devices from cloud.
- Gateway. It adds your gateway and all connected Zigbee, BLE and Mesh devices.
You may skip 1st step if you know token for you Gateway. If you have multiple Gateways - repeat step 2 for each of them.
ATTENTION: If you using two Hass with one gateway - you should use same integration version on both of them!
All settings are important or you may have an unstable operation of the gateway.
- Shared LAN between Gateway and Hass server. You may use VPN, but both IP-address should be in same network subnet!
- Open ping (accept ICMP) from Gateway to Router
- Fixed IP-address for Gateway on your Router
- Wi-Fi Router settings:
- Fixed channel from 1 to 11
- Channel width: 20MHz (don't use 40MHz)
- Authentication: WPA2 (don't use WPA3)
- MikroTik Router settings:
- Wireless > Security Profiles > Group Key Update: 01:00:00 (1 hour or more)
- Keenetic Router settings:
- Disable "Airtime Fairness" for 2.4GHz
- Disable "256-QAM" for 2.4GHz
With the following settings the operation of the gateway may be unstable: different subnets, closed ping to router, Wi-Fi channel 40MHz, WPA3.
-
To enable stats sensors go to:
Configuration > Integrations > Xiaomi Gateway 3 > Options > Zigbee and BLE performance data
-
Install Flex Table from HACS
-
Add new Lovelace tab with Panel Mode
-
Add new Lovelace card:
How it works:
- for each Zigbee and BLE device, a sensor will be created with the time of receiving the last message from this sensor
- there will also be a lot of useful information in the sensor attributes
- for the Gateway, the sensor state shows the uptime of the gateway connection, so you can check the stability of your Wi-Fi
- the
uptime
in gateway sensor attributes means time after reboot gateway - the
msg_missed
may not always show correct data if you reboot the gate or device - dash in the
type
means that the device is not directly connected to the hub - the
parent
can be updated within a few hours
Support custom occupancy timeout for motion sensor and invert state for door sensor (for DIY purposes).
Config through built-in customizing UI or YAML.
It's important to add these lines to your configuration.yaml
. Otherwise, changes to the UI will not be read when you restart Home Assistant.
homeassistant:
customize: !include customize.yaml
To enable customizing UI, you need to enable Advanced Mode in your user profile.
Occupancy timeout for moving sensor.
- a simple timer starts every time a person moves
- the progressive timer starts with a new value with each new movement of the person, the more you move - the longer the timer
- fast back timer starts with doubled value if the person moves immediately after the timer is off
# /config/customize.yaml
binary_sensor.0x158d0003456789_motion:
occupancy_timeout: 180 # simple mode
binary_sensor.0x158d0003456788_motion:
occupancy_timeout: -120 # fast back mode
binary_sensor.0x158d0003456787_motion:
occupancy_timeout: [-120, 240, 300] # progressive timer
binary_sensor.0x158d0003456786_motion:
occupancy_timeout: 1 # for hacked 5 sec sensors
Invert state for contact sensor.
# /config/customize.yaml
binary_sensor.0x158d0003456789_contact:
invert_state: 1 # any non-empty value will reverse the logic
Ignore offline device status.
# /config/customize.yaml
switch.0x158d0003456789_switch:
ignore_offline: 1 # any non-empty value
Zigbee bulb default transition.
light.0x86bd7fffe000000_light:
default_transition: 5
Supported only for Multi-Mode Gateway.
You do not need to solder or flash the gate. It is ready to work with the ZHA out of the box.
Note: ZHA developers do not recommend using ZHA with EZSP radios for WiFi-based bridges because of possible stability problems. But a range of users use the gate in this mode without issues.
Video DEMO
Zigbee Home Automation (ZHA) is a standard Home Assistant component for managing Zigbee devices. It works with various radio modules such as CC2531, Conbee II, Tasmoted Sonoff ZBBridge and others.
Attention: ZHA mode cannot work simultaneously with Mi Home!
When you turn on ZHA mode - zigbee devices in Mi Home will stop working. Bluetooth devices (BLE and Mesh) will continue to work in Mi Home and Hass.
To switch the mode go to:
Configuration > Integrations > Xiaomi Gateway 3 > Options > Mode
Zigbee devices will not migrate from Mi Home to ZHA. You will need to pair them again with ZHA.
You can change the operating mode at any time. This mode will flash firmware of Gateway Zigbee chip to a new version with reduced speed, to avoid errors in the data. And flash it back when you switch back to Mi Home mode. Switch back before any Gateway firmware updates via Mi Home.
Thanks to @zvldz for help with socat.
Important: The zigbee chip of this gateway (EFR32 EZSP v8) is supported in zigbee2mqtt in experimental mode.
Video DEMO
Zigbee2MQTT is a bigest project that support hundreds Zigbee devices from different vendors. And can be integrate with a lot of home automation projects.
Unlike the ZHA you should install to your host or Hass.io system: Mosquitto broker and Zigbee2MQTT Addon. Also you should setup MQTT integration.
Attention: Zigbee2MQTT mode cannot work simultaneously with Mi Home!
When you turn on Zigbee2MQTT mode - zigbee devices in Mi Home will stop working. Bluetooth devices (BLE and Mesh) will continue to work in Mi Home and Hass.
To switch the mode go to:
Configuration > Integrations > Xiaomi Gateway 3 > Options > Mode
Zigbee devices will not migrate from Mi Home to Zigbee2MQTT. You will need to pair them again.
This mode will flash firmware of Gateway Zigbee chip automatically! And flash it back when you switch back to Mi Home mode. Becuse Zigbee2MQTT support only new EZSP firmware and Xiaomi works with old one.
You can use this mode with thank to this peoples:
- @kirovilya - developed support EFR32 chips in z2m project
- @CODeRUS and @zvldz - adapted the script to flash the chip
- @faronov - complied a new version of firmware
Video DEMO
Buttons, vibration sensor, cube, locks and other - create an action entity. The entity changes its state for a split second and returns to an empty state. The attributes contain useful data, they are not cleared after the event is triggered.
Depending on the button model, its state may be:
- single button:
single
,double
,triple
,quadruple
,many
,hold
,release
,shake
- double button:
button_1_single
,button_2_single
,button_both_single
, etc. - triple button:
button_1_single
,button_12_single
,button_23_single
, etc.
Your button may not have all of these options! Check available values in action
-sensor attributes when you interact with button.
automation:
- alias: Turn off all lights
trigger:
- platform: state
entity_id: sensor.0x158d0002fa99fd_action # change to your button
to: button_1_single # change to your button state
action:
- service: light.turn_off
entity_id: all
mode: single
Read more in wiki.
Video DEMO
You can use this integration to get a token for any of your Xiaomi devices. You don't need to have Xiaomi Gateway 3. Just install and add the integration, enter the username / password from your Mi Home account. And use the integration settings to view your account's device tokens.
Also you can get:
- LAN key for old Xiaomi Mijia Gateway (lumi.gateway.v3)
- room names for Vacuums that support room with names
- Bindkey for BLE devices that has it
It's safe to use multiple Hass servers (main and reserve) with integration, but:
- You should use the same integration version and same integration settings on both servers
- You may use different Hass versions on both servers
- If you using ZHA mode:
- ZHA integration should be installed only on one Hass
- Gateway integration may be installed only on one Hass or on both, but with same integration version and same integration settings
This option disable only beeps from hacked motion sensor (5 sec):
Configuration > Integrations > Xiaomi Gateway 3 > Options > Disable buzzer
The component enables Telnet on Gateway via Miio protocol.
The component starts the MQTT Server on the public port of the Gateway. All the Zigbee logic in the Gateway runs on top of the built-in MQTT Server. By default, access to it is closed from the outside.
ATTENTION: Telnet and MQTT work without a password! Do not use this method on public networks.
After rebooting the device, all changes will be reset. The component will launch Telnet and public MQTT every time it detects that they are disabled.
- Check network config readme section
- Check if the Gateway really has the IP-address you set in the configuration
- Check if the Gateway really use the MiHome token you set in the configuration. When you add a hub to MiHome - its token changes. The integration only updates tokens when Hass starts. And only if there are no problems with connection to the cloud servers. If there are problems, the old (wrong) token value will be shown.
- Check network config readme section, gateway and Wi-Fi router settings must be fully matched to all items in the section
- Turn on stat sesors (Configuration > Integrations > Gateway 3 > Configure > Add statisic sensors)
- Check that the connection to the Gateway is not dropped for weeks (
_gateway
sensor value means connection uptime) - Check that the zigbee error rate is not increasing at a high rate (
zigbee_oe
attribute in_gateway
sensor, normal rate: 1-2 errors per hour) - Check that CPU utilisation is within normal values (
load_avg
attribute in_gateway
sensor (first 3 items), normal value: below 3) - Check that message skip rate for your zigbee device are not high (
msg_missed
attribute in_zigbee
sensor) - Check that your zigbee device is connected via a router, the most stable operation when your devices are connected directly to the gateway (
parent
attribute in_zigbee
sensor) - Make sure there are no other electronic devices within 0.5 meter from your Gateway
- Check the distance between the Gateway and the device, greater distances and barriers - the less stable the operation
- Check the gateway zigbee TX power, you can try to increase it if you need (
radio_tx_power
attribute in_gateway
sensor)
Logging can be setup from:
1. Integration config (GUI)
Configuration > Integrations > Xiaomi Gateway 3 > Configure > Debug
Shows only component logs. The link to the logs is always random and will apear in Notifications.
By adding params to url, you can filter data in the logs, enable auto refresh (in seconds) and tail last lines.
http://192.168.1.123:8123/c4e99cfc-0c83-4a39-b7f0-278b0e719bd1?q=ble_event&r=2&t=100
2. Integration config (YAML)
Component can log different debug events from different gateways. You can set global debug_mode
for all gateways or config custom modes for custom gateways from GUI.
Recommended config:
xiaomi_gateway3:
logger:
filename: xiaomi_gateway3.log # default empty
propagate: False # if False - disable log to home-assistant.log and console, default True
max_bytes: 100000000 # file size, default 0
backup_count: 3 # file rotation count, default 0
debug_mode: true,miio,mqtt # global modes for all gateways, default empty
Additional settings
level: debug # default
mode: a # a - append to file, w - write new file, default
format: "%(asctime)s %(message)s" # default
3. Hass default config
You can set custom modes for custom gateways from GUI. Witout custom modes you won't see gateways logs.
logger:
logs:
custom_components.xiaomi_gateway3: debug