SparkFun MicroMod SAMD51 Processor (DEV-16791)

With a 32-bit ARM Cortex-M4F MCU, the SparkFun MicroMod SAMD51 Processor Board is one powerful microcontroller packaged on a small board! The provides you with an economical and easy to use development platform if you're needing more power with minimal working space. This MicroMod SAMD51 even comes flashed with the same convenient UF2 bootloader like the SAMD51 Thing Plus and the RedBoard Turbo. The MicroMod SAMD51 uses the MicroMod Hardware pinout to easily switch between carrier boards.

The ATSAMD51J20 utilizes a 32-bit ARM Cortex-M4 processor with Floating Point Unit (FPU), running up to 120MHz, up to 1MB of flash memory, up to 256KB of SRAM with ECC, up to 6 SERCOM interfaces, and other features.

• /Arduino Board Files - Board definitions for MicroMod SAMD51
• /Documentation - Datasheets, additional product information
• /Hardware - Eagle design files (.brd, .sch)
• /Production - Production panel files (.brd)
• /uf2-bootloader - Default firmware

• Graphical Datasheet - Pinout of the SAMD51 Processor Board
• Installing Board Definitions in the Arduino IDE - Information about installing Arduino Board Files for Arduino
• Hookup Guide - Basic hookup guide

• DEV-16791

• v1.3 - Minor update to swap SPI1 lines to the external flash
• v1.2 - Initial Release

This product is open source!

Please review the LICENSE.md file for license information.

If you have any questions or concerns on licensing, please contact technical support on our SparkFun forums.

Distributed as-is; no warranty is given.

• Your friends at SparkFun.