leptopt1los / t5577_multiwriter Goto Github PK

I note that:

if(app->protocol_id != LFRFIDProtocolEM4100) break;

So it shows as "cannot load key file" error - is it possible to have support for other protocols? Or have better error messages?

Hello!

I was wondering if it is possible for the application to write 2 blocks with predefined data, and another 2 with data from the list of saved tags. In the apartment building where I live there is an Electra brand intercom. This manufacturer, in the desire to secure the system, altered the em4100 standard and added the extra date 0x7E1EAAAAAAAAAAAAA.

Through a workaround I managed to clone these tags, but I think there is a more elegant way to solve this problem

https://forum.flipper.net/t/electra-intercom/6368/55

I also have a proxmark3, and there I use the command below

lf t55xx write -b 0 -d 00148080
lf t55xx write -b 1 -d 7E1EAAAAA
lf t55xx write -b 2 -d AAAAAAAA
lf t55xx write -b 3 -d ...
lf t55xx write -b 4 -d ...

I tried to write a t5577 tag with proxmark3 with the 3 blocks above and later read it and save it with flipper zero, so that I can use your application and write 2 tags on one, but flipper zero doesn't read it.
I hope I could make myself understood.

Thank you!