lpinner / yardwiz Goto Github PK

Original user request:
"Make column widths automatically save after being dragged to a preferred width 
or make the ‘Title’ column at least double the default width – the 
default remaining column widths are just wide enough."

wx.Sound doesn't work on Ubuntu 10.10 so no sound will get played when 
downloads complete.

[deleted issue]

Downloads may fail with the getWizPnP error - "Search for WizPnP devices 
failed" when connecting via a device name, even after listing programs 
succeeded using that device name.  This has only occurred on one Win 7 Ultimate 
PC that I'm aware of and the issue does not occurr on the same users Win XP PC. 


Workaround (thanks to netmask from the Beyonwiz forum): connect using IP or 
IP:Port syntax.

What steps will reproduce the problem?
1.load yardwiz, admin rights granted.
2.yardwiz connects, downloads program listings correctly
3.attempting to download selected show causes yardwiz to sit for a while and 
then reports with the "Bad WizPnP response: No device description returned"


What version of YARDWiz are you using? On what operating system?
yardwiz 0.3.8.1
windows pro 7


Please provide any additional information below.
running as administrator
confirmed the above behaviour with comodo firewall turned off
beyonwiz dpp2 with 1.05.350 firmware

What is the expected output? What do you see instead?
For some reason yardwiz is only displaying recording up to April 4th, I've got 
several recordings after that, but they aren't listed.

What version of YARDWiz are you using? On what operating system?
0.4.2 running on Windows 7 x64

[deleted issue]

What steps will reproduce the problem?
1.Running YardWiz.exe
2.
3.

What is the expected output? What do you see instead?

Error message "Errors occurred - see log file" attached.


What version of YARDWiz are you using? On what operating system?
Version 0.4.6
Windows 7 Home

Please provide any additional information below.

I might add this only happened a few days ago, up until then it worked without 
fault.

Hope you can help.

Peter,
===
[email protected]
[email protected]

Add option to play sound on completion of download. Easiest is to use wx.Sound, 
but I don't think this is available on Mac

Replace "if 'win' in sys.platform" with "if sys.platform[0:3]=='win'"

Connect fails on OSX if quick listing is not enabled.

I've been asked a few times to make a version of YARDWiz for 
QNAP/Synology/etc... NAS's.

While it's likely to be technically possible to get getWinPnP running on these 
NAS's, the YARDWiz GUI would have to be completely rewritten to run in a web 
browser.  This is not something I am willing to do.

YARDWiz 0.3.9
Ubuntu (and Xubuntu) 11.10

Start YARDWiz, connect to PVR and attempt to download a recording. YARDWiz 
crashes with a segfault after selecting a filename and dismissing the 
wx.FileDialog

What steps will reproduce the problem?
======================================
1. Connect to Beyonwiz
2. Select program >6240MB to download
3. Choose "download now" and proceed to download

What is the expected output? What do you see instead?
=====================================================
Expected: The file is downloaded to the selected drive/share.
Result: The download freezes at 6240.00MB and shows Speed as 0.00MB/S. This 
also occurs at 12480.00MB.

What version of YARDWiz are you using? On what operating system?
================================================================
YARDWiz 0.4.4. Windows 7/64bit. Beyonwiz DP-P1 Firmware 01.05.350.

Please provide any additional information below.
================================================
Workaround is to pause the download and resume. The download then continues.

YARDWiz can appear off screen if the saved coordinates are greater than the 
screen size

Schedule one or more downloads, click Tools->Scheduled Recordings... and change 
the scheduled date/time, YARDWiz will crash.

Fixed by r436. 

Fix will be released in 0.4.1. Until then, workaround by cancelling the 
original schedule and scheduling the recording/s for download again.

This is a known issue with the Beyonwiz Firmware 01.05.334 (and perhaps 
01.07.334 for the later DP-P2 but I don't know for sure). It's nothing to do 
with YARDWiz. The only fix is to upgrade the firmware on your PVR to 01.05.350 
(or 01.07.350 if you have a later DP-P2).

Firmware downloads and instructions can be found on the Beyonwiz website: 
http://www.beyonwiz.com.au/downloads.php

Platform: reproduced on Fedora 16/Mint 12 & Gnome 3
Symptoms: No vertical scrollbar after expanding an option group (i.e 
Setting/Window/etc). Unable to scroll with mousewheel.
Workaround: Resize the window slightly with mouse, scrollbar will appear.

[deleted issue]

On Windows when running from pythonw.exe, the getwizpnp.exe subprocess has 
proven troublesome to kill (i.e if you want to pause or stop a download). I've 
had to fallback to using the taskkill.exe program that is included in most 
recent versions of Windows (XP and later). Taskkill.exe is not included in 
Windows XP Home edition and I don't know if it is included in Windows Vista/7 
basic/home/starter editions. 

If this is an issue, an alternative is to download PsTools?.zip from 
http://technet.microsoft.com/en-us/sysinternals/bb896683 and extract PsKill.exe 
to somewhere on your PATH. YARDWiz will then attempt to use pskill instead. 

Install python 2.6.6 (Windows) and try to run YARDWiz from source.  python will 
raise the exception:
AttributeError: 'module' object has no attribute 'STARTF_USESHOWWINDOW'

Reason: STARTF_USESHOWWINDOW was removed from subprocess module in python 2.6.6+

Workaround: use a hardcoded constant = 1

Can't paste (ctrl-v and right click) in preferences dialog (v0.2.3 svn:trunk)

DEBUG __init__._ApplyConfig: YARDWiz 1.0.0.0 C:\Program Files (x86)\YARDWiz\yardwiz.exe win32
DEBUG __init__._ApplyConfig: .\getWizPnP.exe
DEBUG __init__._ApplyConfig: PATH
    C:\Program Files (x86)\VideoLAN\VLC
    C:\ProgramData\Oracle\Java\javapath
    C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common
    C:\windows\system32
    C:\windows
    C:\windows\System32\Wbem
    C:\windows\System32\WindowsPowerShell\v1.0\
    C:\Program Files (x86)\Common Files\GTK\2.0\bin
    C:\Program Files (x86)\Git\cmd
    C:\Program Files (x86)\QuickTime\QTSystem
    C:\bin
    C:\Users\Sean\AppData\Roaming\Python\Scripts
    C:\Users\Sean\AppData\Roaming\cabal\bin
    D:\Program Files\nodejs\
    C:\Program Files (x86)\sbt\\bin
    C:\Program Files\Java\jdk1.8.0_40\bin
    D:\Ruby200-x64\bin
    C:\Program Files (x86)\clisp-2.49
    C:\Apps\apache-ant-1.9.2\bin
    C:\Apps\gradle\bin
    C:\Apps\apache-maven\bin
    C:\Apps\Python27
    C:\Apps\Python27\Scripts
    C:\Program Files (x86)\GnuWin32\bin
    C:\Program Files (x86)\Git\bin
    C:\Chocolatey\bin
    D:\Program Files\Boot2Docker for Windows
    C:\Program Files (x86)\SMLNJ\bin
    C:\Users\Sean\AppData\Roaming\npm
    C:\Program Files (x86)\sbt\bin
    C:\Program Files (x86)\EaseUS\Todo Backup\bin\x64\
    .
    C:\Program Files (x86)\YARDWiz
DEBUG __init__._ApplyConfig: Config:
  Settings
    cachedevice=True
    device=192.168.0.122:49152 beyonwiz
    autoconnect=True
    onselect=False
    lastdir=F:\Beyonwiz\Movies
    tsformat=True
    postdownloadcommand=# "C:\Program Files\Avidemux 2.6 - 64bits\avidemux.exe" %F #somecommand %F (filepath) and/or %D (directory) # comment
    vlcargs=--deinterlace-mode=mean --qt-minimal-view
    tempfile=True
    display_dateformat=%a, %d %b %Y %H:%M
    filename_dateformat=%Y-%m-%d
    confirmdelete=True
    quicklisting=False
    showtooltips=True
    retries=3
    delete=False
  getWizPnP
    delay=0.25
    wizpnptimeout=2
  Sounds
    playsounds=True
    downloadcomplete=C:\Program Files (x86)\YARDWiz\sounds\downloadcomplete.wav
  Window
    fade=True
    xsize=1920
    ysize=1046
    xmin=0
    ymin=0
  Debug
    debug=True
    logfile=c:\users\sean\appdata\local\temp\YARDWiz.20150509.003859.2039.log
DEBUG __init__._ApplyConfig: Devices="192.168.0.122:49152 beyonwiz"
DEBUG __init__._ApplyConfig: Devices="['192.168.0.122:49152 beyonwiz']"
DEBUG utilities.__init__: Adding new Device
DEBUG utilities.__init__: Device IP,Port,Name="192.168.0.122,49152,beyonwiz"
DEBUG utilities.__init__: Device display="beyonwiz (192.168.0.122:49152)"
DEBUG utilities.__init__: Device args="['-H', '192.168.0.122', '-p', '49152']"
DEBUG utilities.__init__: Device str="192.168.0.122:49152 beyonwiz"
DEBUG __init__._ApplyConfig: 192.168.0.122:49152 beyonwiz
DEBUG __init__._ApplyConfig: OrderedDict([('beyonwiz (192.168.0.122:49152)', <yardwizgui.utilities.Device object at 0x03238F10>)])
DEBUG __init__._ApplyConfig: [<yardwizgui.utilities.Device object at 0x03238F10>]
DEBUG __init__._ApplyConfig: Window size: xmin 0, ymin 0, xsize 1920, ysize 1046
DEBUG __init__._ApplyConfig: Window resolution: xres 1920, yres 1046
DEBUG __init__._ApplyConfig: CanSetTransparent: True
DEBUG __init__._ApplyConfig: VLC path: VLC
DEBUG __init__.cbxDevice_OnKillFocus: 192.168.0.122:49152 beyonwiz
DEBUG __init__.cbxDevice_OnKillFocus: OrderedDict([('beyonwiz (192.168.0.122:49152)', <yardwizgui.utilities.Device object at 0x03238F10>)])
DEBUG __init__.cbxDevice_OnKillFocus: [<yardwizgui.utilities.Device object at 0x03238F10>]
DEBUG __init__.cbxDevice_OnKillFocus: 192.168.0.122:49152 beyonwiz
DEBUG __init__.cbxDevice_OnKillFocus: OrderedDict([('beyonwiz (192.168.0.122:49152)', <yardwizgui.utilities.Device object at 0x03238F10>)])
DEBUG __init__.cbxDevice_OnKillFocus: [<yardwizgui.utilities.Device object at 0x03238F10>]
DEBUG __init__._Connect: Connecting to 192.168.0.122:49152 beyonwiz
DEBUG __init__._Log: Connecting to beyonwiz (192.168.0.122:49152)...
DEBUG utilities.subproc: getWizPnP.exe --all -v -l --episode --index --sort=fatd -H 192.168.0.122 -p 49152 --wizpnpTimeout=2 --delay=0.25
DEBUG utilities.subproc: ['getWizPnP.exe', '--all', '-v', '-l', '--episode', '--index', '--sort=fatd', '-H', '192.168.0.122', '-p', '49152', '--wizpnpTimeout=2', '--delay=0.25']
DEBUG __init__._Log: The WizPnP server is online.
DEBUG utilities._listprograms: Connecting to beyonwiz (192.168.0.122:49152)
DEBUG utilities.subproc: getWizPnP.exe -vv --all -l --episode --index --sort=fatd -H 192.168.0.122 -p 49152
DEBUG utilities.subproc: ['getWizPnP.exe', '-vv', '--all', '-l', '--episode', '--index', '--sort=fatd', '-H', '192.168.0.122', '-p', '49152']
DEBUG utilities._getinfo: Connecting to beyonwiz (192.168.0.122:49152)
DEBUG utilities._listprograms: 7 Digital: Air Crash Investigations/Choosing Sides (British Midland Flight 92)
DEBUG utilities._listprograms: Index name: recordings/Air Crash Investigations May.7.2015_23.8
DEBUG utilities._listprograms: Thu May  7 23:08:00 2015 - Fri May  8 00:30:01 2015
DEBUG utilities._listprograms: playtime:   82:01    recording size:   3969.0 MB    bit rate:   6.5 Mb/s
DEBUG utilities._listprograms: autoDelete: Never
DEBUG utilities._listprograms: 
DEBUG __init__._Log: Added Air Crash Investigations - Choosing Sides (British Midland Flight 92) - Thu, 07 May 2015 23:08
DEBUG utilities._getinfo: 7 Digital: Air Crash Investigations/Choosing Sides (British Midland Flight 92)
DEBUG utilities._getinfo: A risky manoeuvre extracted a tragic price when an emergency motorway
DEBUG utilities._getinfo: landing cost 47 lives and injured many more in the Kegworth Air
DEBUG utilities._getinfo: Disaster, which involved the British Midland Flight 92. (United
DEBUG utilities._getinfo: Kingdom, English)
DEBUG utilities._getinfo: Index name: recordings/Air Crash Investigations May.7.2015_23.8
DEBUG utilities._getinfo: Thu May  7 23:08:00 2015 - Fri May  8 00:30:01 2015
DEBUG utilities._getinfo: playtime:   82:01    recording size:   3969.0 MB    bit rate:   6.5 Mb/s
DEBUG utilities._getinfo: autoDelete: Never
DEBUG utilities._getinfo: 
DEBUG __init__._Log: Updated episode info for Air Crash Investigations - Choosing Sides (British Midland Flight 92).

(snip)

DEBUG __init__._Log: Added SlideShow - Fri, 20 Mar 2015 15:53
DEBUG utilities._listprograms: 7mate: SlideShow *AC3
DEBUG utilities._listprograms: Index name: recordings/SlideShow Mar.14.2015_1.23
DEBUG utilities._listprograms: Sat Mar 14 01:23:00 2015 - Sat Mar 14 03:50:01 2015
DEBUG utilities._listprograms: playtime:  147:01    recording size:   9127.9 MB    bit rate:   8.3 Mb/s
DEBUG utilities._listprograms: autoDelete: Never
DEBUG utilities._listprograms: 
DEBUG __init__._Log: Added SlideShow - Sat, 14 Mar 2015 01:23
DEBUG utilities._listprograms: 7mate: SlideShow *AC3
DEBUG utilities._listprograms: Index name: recordings/SlideShow Mar.13.2015_14.53
DEBUG utilities._listprograms: Fri Mar 13 14:53:01 2015 - Fri Mar 13 17:25:03 2015
DEBUG utilities._listprograms: playtime:  152:02    recording size:   9118.4 MB    bit rate:   8.0 Mb/s
DEBUG utilities._listprograms: autoDelete: Never
DEBUG utilities._listprograms: 
DEBUG __init__._Log: Added SlideShow - Fri, 13 Mar 2015 14:53

ERROR: No data return for '<show name>'
Returned: <show name> Connecting to beyonwiz (192.168.0.122:49152)

Non-ascii character issue again.

The issue is wxpython on OSX is having trouble with wx.Sound.
Workaround for the hang on OSX is to disable playing a sound on completion of 
all downloads. Uncheck - "Settings->Preferences->Sounds->Play sound after 
download".

http://www.beyonwiz.com.au/phpbb2/viewtopic.php?p=91178#91178

[deleted issue]

Move deletion code to a separate thread

What steps will reproduce the problem?
1. Connect to a WizPnP server, wait for update to complete 
2. Click "Title" in the titles bar to sort on title
3. List changes, but is not in any discernible order

What is the expected output? What do you see instead?
I expect the list of recordings to be displayed sorted in alphabetical order. I 
can see any logic to how the entries are ordered.

What version of YARDWiz are you using? On what operating system?
0.4.3 - sorting was working on previous version 0.4.2.1, confirmed by reverting.

Please provide any additional information below.
Sorting by Channel, Date, Size and length all work, just Title doesn't (ie: the 
most useful!)

Remove Beyonwiz subfolder names from downloaded filenames

If you modify the default getwizpnp.conf (Windows) or .getwizpnp (Linux/Mac) 
you may break YARDWiz. In particular, GetWizPnP's date format is hardcoded into 
YARDWiz.

Add tooltips to preferences

YARDWiz 0.4.2 and getWizPnP 0.5.3

Issue:
Resuming a paused TS format download starts the download from the beginning, 
overwriting the already downloaded portion so it appears (speed shows 0.0 MB/s) 
that nothing is happening until the same amount has been downloaded again.

Resuming a paused TVWIZ format download fails to resume the datafile that was 
being downloaded prior to pausing and starts downloading the following datafile 
leaving the previous datafile incomplete.

Cause:This is a bug in getWizPnP 0.5.3

Workaround: replace getWizPnP executable with getWizPnP version 0.5.2 from 
http://www.openwiz.org/wiki/GetWizPnP_0.5.2  

YARDWiz and getWizPnP do not work on techguys unlocked FV-L1 firmware.  
http://www.beyonwiz.com.au/phpbb2/viewtopic.php?t=7194

This is a limitation of the unlocked firmware and no workaround will be 
implemented in YARDWiz.

Add optional post download command which will be configured in preferences.

The following error occurs when you and attempt to run YARDWiz"
"The application has failed to start because the application configuration is 
incorrect. Reinstalling the application may fix the problem."

Workaround: download and install the Microsoft Visual C++ 2008 SP1 
Redistributable Package (x86)
http://www.microsoft.com/downloads/en/details.aspx?familyid=A5C84275-3B97-4AB7-A
40D-3802B2AF5FC2&displaylang=en

/tmp/YARDWiz-1.0.0 $ ./yardwiz
./yardwiz:24: wxPyDeprecationWarning: Using deprecated class PySimpleApp.
  wxapp = wx.PySimpleApp(0)
Traceback (most recent call last):
  File "./yardwiz", line 26, in <module>
    wizgui = yardwizgui.GUI()
  File "/tmp/YARDWiz-1.0.0/yardwizgui/__init__.py", line 43, in __init__
    gui.GUI.__init__( self, parent=None )
  File "/tmp/YARDWiz-1.0.0/yardwizgui/gui.py", line 92, in __init__
    self.txtLog.SetMaxLength( 0 )
  File "/usr/lib64/python2.7/site-packages/wx-3.0-gtk2/wx/_core.py", line 13339, in SetMaxLength
    return _core_.TextEntryBase_SetMaxLength(*args, **kwargs)
wx._core.PyAssertionError: C++ assertion "IsSingleLine()" failed at /tmp/portage/x11-libs/wxGTK-3.0.2.0-r1/work/wxPython-src-3.0.2.0/src/gtk/textctrl.cpp(847) in GetEditable(): shouldn't be called for multiline

Change colour (grey out?)

There have been issues with AVG and Symantec (SONAR) antivirus software 
reporting yardwiz.exe or getwizpnp.exe as malware. These reports are "false 
positives" and there is nothing to worry about, there is no malware in YARDWiz 
or getWizPnP and all the source code is available for you to peruse if you so 
desire.

If you get a false positive, please report it to the antivirus software maker 
and also let me know.

How to report as a false positive:
AVG - http://forums.avg.com/ww-en/avg-forums?sec=thread&act=show&id=395
Symantec/Norton/SONAR - https://submit.symantec.com/false_positive

From http://www.beyonwiz.com.au/phpbb2/viewtopic.php?p=91150#91150

"When a recording has bookmarks. getWizPnP goes into infinite recursion trying 
to load the bookmarks."

A YARDWiz workaround is to enable quick listing in your preferences.

I have a Beyonwiz DP-P2.

I can access the machine from my Linux box using my previous stand-alone 
getwizpnp install.

What steps will reproduce the problem?
1. Entering IP, IP/Port or name makes no difference
2. Clearing the box and searching makes no difference

What is the expected output? 
List in window showing programs recorded on Beyonwiz

What do you see instead?

Error logs shows:

1. If no details entered into search window:

Searching for Wizzes.
Unable to discover any Wizzes.

2. If IP only put in search window:

Connecting to 192.168.0.05...
The WizPnP server is online
Unable to list programs on the WizPnP server:
Can't locate Beyonwiz/WizPnP.pm in @INC (@INC contains: /etc/perl 
/usr/local/lib/perl/5.10.1 /usr/local/share/perl/5.10.1 /usr/lib/perl5 
/usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 
/usr/local/lib/site_perl .) at /usr/local/bin/getWizPnP.pl line 1242.
BEGIN failed--compilation aborted at /usr/local/bin/getWizPnP.pl line 1242.

3. If IP and port in search window:

Connecting to 192.168.0.05:49152...
The WizPnP server is online
Unable to list programs on the WizPnP server:
Can't locate Beyonwiz/WizPnP.pm in @INC (@INC contains: /etc/perl 
/usr/local/lib/perl/5.10.1 /usr/local/share/perl/5.10.1 /usr/lib/perl5 
/usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 
/usr/local/lib/site_perl .) at /usr/local/bin/getWizPnP.pl line 1242.
BEGIN failed--compilation aborted at /usr/local/bin/getWizPnP.pl line 1242.

4. If name only in search window:

Connecting to beyonwiz...
Unable to list programs on the WizPnP server:
Can't locate Beyonwiz/WizPnP.pm in @INC (@INC contains: /etc/perl 
/usr/local/lib/perl/5.10.1 /usr/local/share/perl/5.10.1 /usr/lib/perl5 
/usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 
/usr/local/lib/site_perl .) at /usr/local/bin/getWizPnP.pl line 1242.
BEGIN failed--compilation aborted at /usr/local/bin/getWizPnP.pl line 1242.
Connecting to Beyonwiz...
Unable to list programs on the WizPnP server:
Can't locate Beyonwiz/WizPnP.pm in @INC (@INC contains: /etc/perl 
/usr/local/lib/perl/5.10.1 /usr/local/share/perl/5.10.1 /usr/lib/perl5 
/usr/share/perl5 /usr/lib/perl/5.10 /usr/share/perl/5.10 
/usr/local/lib/site_perl .) at /usr/local/bin/getWizPnP.pl line 1242.
BEGIN failed--compilation aborted at /usr/local/bin/getWizPnP.pl line 1242.

What version of the product are you using? 

0.3.1


On what operating system?

Kubuntu 10.04

Please provide any additional information below.
Please see initial entry. 

... as well as .ts

What steps will reproduce the problem?
1. From a device with multiple files with names such as "Marvel's Agents Of 
S.H.I.E.L.D - Episode Name.ts" select "Download" and the name is shown as 
"Marvel's Agents Of S.H.I.E.L.ts"

What is the expected output? What do you see instead?
I expect to see the full file name, not the truncated one.  The problem is also 
that if you say download 10 files and they all have a similar prefix, then the 
downloads will overwrite, or fail.

What version of YARDWiz are you using? On what operating system?
0.4.5 OSX

Please provide any additional information below.

Speed up recording listing by parsing <wiz>/index.txt.
Note:  the index gets out of sync with the recordings after a delete until the 
wiz is re-indexed (see the BUGS section in the getwizpnp documentation).