ltwl2016 / rang_atc-for-qtdragon Goto Github PK

--ATC_RANG FOR QTDRAGON OF LINUXCNC-- This is a configuration file that I personally use. I modified the qtdragon ui of Linuxcnc to use in-line tool change. It also added a signal to be displayed on the "Tool" page. On the main page, you can directly click the button for automatic tool change and manual tool change and settings. The button for tool position is located on the "Set tool position" button. This interface is in Chinese and is mainly provided as a reference for the convenience of users in China! Please refer to the screenshot for specific details. This configuration uses LinuxCNC Pncconf, an old FPGA card with an ominous name. The name is similar to hm2_lite. The version must be version 2.9.2 or 2.10.

---translate--- 这是一个我个人使用的配置文件修改了Linuxcnc的qtdragon ui 能使用直排换刀，其中还加入了信号显示在“刀具”页面，主页面可以直接点击按钮进行自动换刀和手动换刀和设置刀具位置的按钮位于“设置刀位”按钮上，这个是中文的界面主要是为方便**国内的用户提供的参考！具体的细节参考截图，该配置使用的是LinuxCNC Pncconf,老式的FPGA卡，具体名称不祥，名称类似hm2_lite，使用版本必须在2.9.2或者2.10版