The custom fan curve doesn't get saved for me. I set my own fan curve, then press save

Fixed with <a class="commit-link" data-hovercard-type="commit" data-hovercard-url="htt

Custom fan curve does not save about tuxclocker HOT 5 CLOSED

lurkki14 commented on May 29, 2024

Custom fan curve does not save

from tuxclocker.

Comments (5)

Lurkki14 commented on May 29, 2024

Is this related to the issue you closed?

from tuxclocker.

NoXPhasma commented on May 29, 2024

No, it's not. This still happens with writeable config file. I checked that double.

The config file actually gets the changes made on the mesh, but neither does it applied nor is it shown on the mesh when reopened. Current config file:

[%General]
currentProfile=test
latestUUID=GPU-83ec8765-92ac-8f79-c841-881477b8e35a

[New%20Profile]
GPU-83ec8765-92ac-8f79-c841-881477b8e35a\fanControlMode=0
GPU-83ec8765-92ac-8f79-c841-881477b8e35a\memoryClockOffset=0
GPU-83ec8765-92ac-8f79-c841-881477b8e35a\xpoints="0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 9, 67, "
GPU-83ec8765-92ac-8f79-c841-881477b8e35a\ypoints="0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 31, 78, "
isProfile=true

[test]
GPU-83ec8765-92ac-8f79-c841-881477b8e35a\fanControlMode=2
GPU-83ec8765-92ac-8f79-c841-881477b8e35a\memoryClockOffset=0
GPU-83ec8765-92ac-8f79-c841-881477b8e35a\xpoints="0, 0, 0, 0, 0, 0, 1, 45, 71, "
GPU-83ec8765-92ac-8f79-c841-881477b8e35a\ypoints="0, 0, 0, 0, 0, 0, 49, 58, 81, "
isProfile=true

from tuxclocker.

Lurkki14 commented on May 29, 2024

Are other settings being loaded correctly?

from tuxclocker.

NoXPhasma commented on May 29, 2024

Yes, other changes are stored and loaded properly. Even on a app restart.

However I just found out that when I choose an offset for memory clock and switch profiles (Profile 1 (+100), Profile 2 (0)) from Profile 1 to 2 and back to 1, it shows 200 instead of 100. It actually doubles whatever is used, if it's -16 it makes it to -32. And so on.

from tuxclocker.

Lurkki14 commented on May 29, 2024

Fixed with 21a4a08

from tuxclocker.

Recommend Projects