Timelapse errors out with "Error taking timelapse frame" after approximately 650 frames about moonraker-timelapse HOT 7 CLOSED

If your sd card runs out of space you need a bigger one, or remove stuff you do not need

from moonraker-timelapse.

from moonraker-timelapse.

You can define the output and the frame path inside your moonraker.conf

[timelapse]
output_path: ~/printer_data/timelapse/
frame_path: /tmp/timelapse/

from moonraker-timelapse.

Thank you for the information. Unfortunately I'm running on a Neptune 4 Pro and the TF card slot doesn't work for this purpose and the USB is taken up by my webcam. I'll have to figure out a workaround or just load everything onto a separate Raspberry Pi and take the processing away from the small printer board. Thanks again!

from moonraker-timelapse.

Closing issue, as this does not appear to be an issue with the code.

from moonraker-timelapse.

Maybe reduce the resolution of the cam as that would end up in smaller snapshot files.

from moonraker-timelapse.

You can define the output and the frame path inside your moonraker.conf

[timelapse]
output_path: ~/printer_data/timelapse/
frame_path: /tmp/timelapse/

Thanks for the information on the default location of the frames! Until I figure out a better solution to the storage issue, at least I can move already taken frames out of there to make room for more while the time-lapse is going.

from moonraker-timelapse.