maj0e / xmlppm Goto Github PK

This is a fork of James Cheney's XML comppression tools, based on XMLPPM 0.98.3 released on sourceforge.
This code is covered by the Gnu Public License, details on the copyright can be found below in the original README:

XMLPPM 0.98 README

James Cheney 2/26/2008

ABOUT XMLPPM

This directory contains version 0.98.3 of XMLPPM, an XML-specific compressor.
XMLPPM reads well-formed XML text from standard input or a provided XML
file, compresses it, and sends the compressed bits to standard output or
a file whose name is extended with ".xpm".  The companion decompressor,
XMLUNPPM, restores the text version of the XML data from the compressed
bits.  (Actually, the restored version might be slightly different,
for example, some whitespace might be stripped, and empty element tags
like <a/> might be expanded to <a></a>).

This version of XMLPPM is *beta*.  It incorporates many improvements
over previous versions of XMLPPM, including:

* Improved decompression speed

* Several nasty bugs have been fixed

One of the bugs fiuxed was in the encoding.  Therefore, XMLPPM 0.98 uses a slightly different encoding than previous versions.

*** WARNING ***

XMLPPM 0.98 is not backwards compatible with previous versions.

Files encoded with previous versions of XMLPPM should be decoded
and re-compressed using XMLPPM 1.98, or, eve, better, restored from
originals. ***

I plan to stick with the encoding used in XMLPPM for a while and try to
make the program itself usable and useful.  However, since there's a new
version of the XML standard out, it may be that I'll have to change the
encoding in an upcoming version to handle XML 1.1.  Therefore, I cannot
yet recommend xmlppm as a stable compression format.

COPYRIGHT and LICENSE TERMS

Portions of this version of the XMLPPM source code compressor are
based on Dmitri Shkarin's sources for PPMDI.  This code is used and
placed under the GPL with permission.  Those files are copyright their
respective authors as described in the source files.  The modifications
to PPMDI and the rest of the XMLPPM source code is copyright James Cheney,
November 2000 and February 2003.

Previous versions of XMLPPM were based on Alistair Moffat's arithmetic
coding sources, Bill Teahan's sources for the PPMD+ text compressor,
and DMitry Shkarin's PPMDG compressor.  That code was placed under the
GPL with permission also, but is no longer part of XMLPPM.  Many thanks
to Alistair and Bill.

This code is covered by the Gnu Public License.

COMPILING XMLPPM

XMLPPM uses version 1.95 of the "expat" XML parser, and so you need to
get and install the development version of that parser before you can
compile XMLPPM.  It also uses libiconv, a library for converting among
character encodings, in order to decompress XML files back to the same
encoding they were originally compressed in (expat normalizes to UTF-8).

Expat (and the installation instructions whereof) is available at:
http://expat.sourceforge.net/.  You need both the shared library and
the headers to compile XMLPPM.  You can also get these as RPMs from
http://www.rpmfind.net, by searching for "expat" and "expat-devel".

XMLPPM is known to compile under Fedora, Ubuntu, and Cygwin.
  

Once you have installed the necessary libraries,
it should suffice to do:

$ ./configure
$ make all
$make install 

This should create two binary files, xmlppm and xmlunppm.

Because XMLPPM is beta software, I don't recommend performing further
installation steps like putting xmlppm in /usr/bin, because then other
users of your machine might think it's a "real" (i.e. fully tested)
utility.


COMPILING UNDER WINDOWS

should be possible using Visual Studio, but I haven't tried in a long time.


COMPILING UNDER WINDOWS WITH CYGWIN

should work fine, using the configuration scripts.


USING XMLPPM

XMLPPM and its companion decompressor XMLUNPPM are command-line driven.
Also, XMLPPM only reads and compresses XML text files.  What counts as
an XML text file actually depends on the underlying XML parser, expat;
if expat does not know how to parse a document, XMLPPM will print expat's
error message and quit.  If XMLPPM spits out an XML parsing error and
won't compress your (well-formed) document, it's more likely a problem
in expat, not in XMLPPM, so I may not be able to do anything about it.


Supposing you do have an XML file that expat likes, to compress it do
one of the following:

./xmlppm < doc.xml > doc.xml.xppm

./xmlppm doc.xml

./xmlppm doc.xml doc.xpm

The first form reads from stdin and writes to stdout; the second reads
from the provided file and writes to the same filename plus ".xpm",
and the third reads from the first file and writes to the second.

To expand the compressed document, do one of the following:

./xmlunppm < doc.xml.xppm > doc.new.xml

./xmlunppm doc.xml.xpm

./xmlunppm doc.xpm doc.xml

You can install xmlppm and xmlunppm to a target directory like
/usr/local/bin by setting the INSTALLDIR line in the Makefile to something
appropriate and doing "make install".

INTERNALTIONALIZATION ISSUES

Expat, the XML parser used by XMLPPM, normalizes all test to UTF-8.
In earlier versions of XMLPPM, this had the annoying consequence that
files uncompressed to UTF-8, no matter what the input encoding was.  Now,
XMLPPM uses libiconv, an i18n library, to translate back to the original
encoding.  To get this right, you may need to add an explicit header

<?xml version="1.x" encoding="<encoding>"?>

to the beginning of your XML source files.  This is good practice anyway;
the annoyance of having to repeatedly write the header should be repaid
by the fact that nice standard-compliant tools like XMLPPM do not barf
on your files.

If your preferred encoding is UTF-8 (or as a subset, ASCII), then
you do not need to worry about this.  However, if  your source file
uses another encoding, then you will have to declare the encoding in a
header in order to avoid problems.  Specifically, your file may fail to
compress, or it may compress fine (because Expat is smart and forgiving
about missing encoding headers) but fail to decompress because of an
"illegal multiple byte character encoding" errors.  This is generally
a signal that you should add an "encoding" header.

A future version might include a command line option for forcing the
correct encoding setting, if this turns out to be needed.

NEW IN VERSION 0.98.3

Several bugs in the encoding have been fixed, mostly to do with large
blocks of text and corner cases such as empty attribute names.

NEW IN VERSION 0.98

Buffering for the internationalization-conversion stage has been added
to improve decompression speed.

Some minor and major bugs have been fixed; see the BUGS file.

NEW IN VERSION 0.97

Added a command-line switch, -s (for (s)tandalone) that turns off
external entity parsing, even if external entities are referenced by
the XML document.  This makes it possible to compress a document that
refers to files that are not present.  However, if such entities define
names used in the xml document, this will result in errors because the
parser won't see the names.

Replaced the old PPMD+ and PPMDG encoders with Dmitry Shkarin's PPMDI,
which is faster than PPMD+ and bzip2, yet results in better XML
compression.  Using PPMDI, XMLPPM gets pretty close to the benchmark
achieved by the XMLPPM+PPM* encoder, but at least an order of magnitude
faster.  This version of XMLPPM is not as fast as gzip, but remember,
we're parsing the XML document also (and compressing it about 1.5-2x
better than gzip)

XMLPPM now takes care to respect the "encoding" attribute in the source
XML document.  Compressing documents in other encodings presented no
problem, because expat supports parsing documents in such encodings.
However, previous versions of XMLPPM produced UTF-8 output, without
updating the encoding tag, resulting in gibberish for encodings
that (unlike the author's native ASCII) do not coincide with UTF-8.
This version uses libiconv to convert the document text back to its
original encoding.

NEW IN VERSION 0.96.2

Version 0.96.1 fixed the Windows version to use the current expat
library name.  Version 0.96.2 introduces better command line argument
handling as described above, plus the ability to compress/decompress
from/to stdin/stdout.

Version 0.96.2 also features the ability to compress XML files that refer
to external parsed entities (like DTDs, or XML snippets.)  Currently,
the only way to do this is if all of the external entities are in the
same directory as the file to be compressed; only the document entity
(that is, the toplevel XML document) will be compressed.  Thus, the
external entities must also be present when the document is decompressed.


NEW IN VERSION 0.96

The original version, 0.95, is in the src/ subdirectory.  Expect this
to go away.  The new version, 0.96, is in the xmlppmdg/ subdirectory.
This version uses a much faster, more efficient, and more effective
implementation of the PPM algorithm, called PPMDG, by Dmitri Shkarin.
The resulting XML compressor is within a factor of 2 of the speed of
gzip, faster than bzip2, and compresses better than either (and also
better than 0.95 xmlppm).



CONTACT

James Cheney, [email protected]