Giter VIP home page Giter VIP logo

developers-community's Introduction

LivePerson Developers' Community

As of August 2018, please open all Pull Requests DIRECTLY TO THE MASTER BRANCH

This repository generates LivePerson's Developers' Community, which can be found at https://developers.liveperson.com. The site is generated using Jekyll. If you find an issue with the documentation, site structure, meta or anything else, please open an issue and we'll respond as soon as possible!

Updating the Documentation

All pages on the site correspond to a Markdown file (.md) which can be found inside the "pages" folder, under the "documents" folder. To update a file, please branch off of the master branch, edit the file in question and create a Pull Request back to the master branch. There's no need for the old Development branch, so please don't create pull requests to it.

Updating/Creating Headers

Jekyll uses a front-matter to arrange and define the various documents in the site. This is the text which appears in between the "---" at the top of each document. It's technically a YAML snippet, so all YAML formatting and rules apply to it. Our headers are usually comprised of the following key/value pairs:

  • pagename: This is the name of the page that will appear at the top of the document.

  • keywords: This replaces the keywords found in the <meta> tag of the page. Leave it unpopulated.

  • documentname: This key can have either "Documents" or "Solutions". This designates which part of the site the document is under.

  • categoryname: This is the category to which the document's API belongs (for example, the "Create Users" method belongs to the Users API which is under Contact Center Management. Therefore, its level2 is "Contact Center Management".

  • documentname: This is the API to which the document belongs.

  • subfoldername: This is a sub-folder to which the document belongs, if there is one.

  • root-link: DEPRECATED. No longer needed as the sidebar is now alphabetically organized and displays all document links. This key accepts a Boolean value. If set to true, the document will be the "top" document for the API and all links to the API from the navigation will lead to it.

  • level-order: DEPRECATED. No longer needed as the sidebar is now alphabetically organized. This key accepts an integer. If root-link is set to true, this key positions the parent API among its category. It is sequential, so 1 will display before 2 and 2 before 3 and so on. Thus, if the Users API (which is under Contact Center Management) has an "Overview" page that has root-link set to true and level-order set to 1, it will appear before the Skills API (which is also under Contact Center Management) which has an "Overview" page that has root-link set to true but a level-order set to 2.

  • order: DEPRECATED. No longer needed as the sidebar is now alphabetically organized and the site hierarchy is determined by a manually updated YAML file. See below for more info. This value accepts an integer. It arranges the documents inside the API. It is sequential, so 1 will display before 2 and 2 before 3 and so on. Note that it doesn't discriminate between folders, so even if you have level4 defined for some documents, they are still placed on the same sequence as the rest of the documents.

  • permalink: this key defines the link at which the document can be found. The format of this value MUST BE as follows. Any other value format will cause the sidebar to malfunction:

    • If the page has a subfoldername value: documentname - subfoldername - pagename. For example: mobile-app-messaging-sdk-for-android-advanced-features-audio-messages.html

    • If the page does not have a subfoldername value: documentname - pagename. For example: users-api-overview.html

  • indicator: this key sets the Chat or Messaging indicator (or both) on a document. It accepts chat, messaging or both as its value.

Adding New Documents to the Sidebar

Once you've created a new document, you'll need to have it manually added. We chose a manual process for the side for a few reasons. First, it reduces the fragility of the sidebar (the extra, manual step gives us another layer of QA). Secondly, it increases the flexibility of the sidebar (we write code once and then maintain a YAML file, making it easier to add options). Lastly, it decreases site build times (since the forloops needed to build a sidebar in a site of our size and complexity are time and resource consuming).

The sidebar's YAML file can be found in the _data folder. It's called documentsupdated.yaml. However, only the project's maintainer should edit this file directly. Please do not open Pull Requests with changes to this file but instead contact the project's maintainer directly. As of August 2018, this is Eden Kupermintz, the owner of this repository. You can reach him at edenk [at] liveperson [dot] com.

Building the Site Locally

If you have not already done so, make sure your computer has Ruby installed. Here's a helpful guide on how best do that on Mac (you can stop once Ruby is installed, you don't need Rails) and on any other system.

Once you have installed Ruby, clone this repository to your machine. Once done, navigate to it using Terminal or your preferred command line interface. Follow the steps below to run the site from your machine. If you're on Windows, don't forget to run your CLI as an admin.

First time install

  1. Run gem install bundler. This will install Ruby's package manager which is required for all following commands.
  2. Run bundle install. This will install all the gems/plugins that the site depends on.
  3. Run bundle exec jekyll build. This builds the _site folder for the first time on your machine. The bundle exec prefix makes sure that bundler "watches" your build and installs any dependencies that might be missing. It's a precaution and is thus not mandatory.
  4. Run bundle exec jekyll serve. This builds the site and serves it over localhost:4000 (by default, you can change the port parameter in config.yml to whatever port you'd prefer).
  5. Navigate to http://localhost:4000/ (or the port you chose) and you'll see the site.

OSX Installation 0. We recommend installing a standalone Ruby Installation and RVM

  1. See this for an example: Stack Overflow

Serving the site after the first install

All you need to run in consequent builds of the site is bundle exec jekyll serve. You can add the suffix --incremental to enable incremental building of the site. This saves build times since the regeneration feature is enabled by default (the site rebuilds every time you hit "save"). When --incremental is used, Jekyll won't rebuild the entire site on every save, only the affected sections. If you'd like the project to automatically open in a new tab, you can add the -o flag to the end of the above command.

Note: changes that alter site navigation or other changes that change the site as a whole might not show up when using --incremental. If that occurs, simply "kill" the build and run bundle exec jekyll serve without the suffix.

Licensing

All usage of the contents, documentation or code found in this repository is subject to the LivePerson API Terms of Use. Please use the link above to read them carefully before utilizing the site.

developers-community's People

Contributors

akshay6533 avatar amit-maimon avatar asafinbar-liveperson avatar asuslean avatar dafnag avatar dataaccess avatar dorinea21 avatar dvillacis94 avatar efelus avatar eplazaso avatar jasmith-lp avatar litalh avatar lonz87 avatar lpbarber avatar lpsaturn avatar michalby11 avatar miki2826 avatar natizlp avatar nimrod-liveperson avatar nirlachman-lp avatar nirlelp avatar orenkatz-lp avatar orm12 avatar pmolensky avatar randymclainlp avatar sbachmannlp avatar shaymlp avatar sivand avatar trosel avatar yanivadler avatar

Watchers

 avatar  avatar

Recommend Projects

  • React photo React

    A declarative, efficient, and flexible JavaScript library for building user interfaces.

  • Vue.js photo Vue.js

    ๐Ÿ–– Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.

  • Typescript photo Typescript

    TypeScript is a superset of JavaScript that compiles to clean JavaScript output.

  • TensorFlow photo TensorFlow

    An Open Source Machine Learning Framework for Everyone

  • Django photo Django

    The Web framework for perfectionists with deadlines.

  • D3 photo D3

    Bring data to life with SVG, Canvas and HTML. ๐Ÿ“Š๐Ÿ“ˆ๐ŸŽ‰

Recommend Topics

  • javascript

    JavaScript (JS) is a lightweight interpreted programming language with first-class functions.

  • web

    Some thing interesting about web. New door for the world.

  • server

    A server is a program made to process requests and deliver data to clients.

  • Machine learning

    Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.

  • Game

    Some thing interesting about game, make everyone happy.

Recommend Org

  • Facebook photo Facebook

    We are working to build community through open source technology. NB: members must have two-factor auth.

  • Microsoft photo Microsoft

    Open source projects and samples from Microsoft.

  • Google photo Google

    Google โค๏ธ Open Source for everyone.

  • D3 photo D3

    Data-Driven Documents codes.