mandl / 808microcam Goto Github PK

Hi

Thanks a lot for the effort you've put into this.

I'm very new to all this firmware programming, so I wonder if ISP808.c actually contains all of the features of the original firmware? It doesn't seem to specify the functions of the on/off buttons etc. I'm most likely missing something though.

Thanks for the help in advance.

Hi Stefan,

Thank you very much for your effort creating an open source firmware 808 camera.

I tested it on Eken 808 #8 but it didn't work:

aureo sdcc # ./ISP808 blink.bin

Read 808 Version
Received 8 bytes: 32 00 00 05 04 00 00 00
Received 8 bytes: 00 33 20 00 00 00 00 00
Received 8 bytes: 00 00 20 01 00 00 00 00

Start Uploading the file: blink.bin
Received 5 bytes: 00 00 00 00 00
Write 8 bytes: 00 80 04 00 2d 10 00 00

Download Code....
Sent 231 bytes
Control transfer failed: transfer timed out
Bulk transfer failed: transfer timed out

Download Ready....

In fact camera #8 is a different USB device (it is 5560 instead of 1528) :
Bus 002 Device 026: ID 04fc:5560 Sunplus Technology Co., Ltd

How do you did the reverse engineering to implement the ISP? I want to adapt it to camera #8.

Best Regards,

Alan