NOTE : This is merely a prove of concept a generic mageia Mageia run's on aarch64 SBC's
However a development image can be downloaded from the Assets at the release tab
The image can be flashed with ecther - or - on linux:
xzcat <image name>.raw.xz | sudo dd of=/dev/sdX bs=4M status=progress && sudo sync
As always: Be sure you got the right device (/dev/sdX) pointing to your sd-card
See UBOOT.md for flashing Uboot to the SD-Card (this step is not necessary for Raspberry PI's)
After the image booted up you should be able to make a ssh connection:
Login: root
Password: mageia