mcmrarm / mbp2018-bridge-drv Goto Github PK

A driver for MacBook models 2018 and newer, which makes the keyboard, mouse and audio output work.

Makefile 0.21% C 99.28% C++ 0.51%

mbp2018-bridge-drv's Introduction

MacBook Bridge/T2 Linux Driver

A driver for MacBook models 2018 and newer, implementing the VHCI (required for mouse/keyboard/etc.) and audio functionality.

The project is divided into 3 main components:

BCE (Buffer Copy Engine) - this is what the files in the root directory are for. This estabilishes a basic communication channel with the T2. VHCI and Audio both require this component.
VHCI - this is a virtual USB host controller; keyboard, mouse and other system components are provided by this component (other drivers use this host controller to provide more functionality, however USB drivers are not in this project's scope).
Audio - a driver for the T2 audio interface, currently only audio output is supported.

Please note that the master branch does not currently support system suspend and resume.

If you want to support me, you can do so by donating to me on PayPal: https://paypal.me/mcmrarm

mbp2018-bridge-drv's People

Contributors

Stargazers

Watchers

mbp2018-bridge-drv's Issues

audio driver performance

When using this audio driver on a system with pulseaudio and realtime-scheduling = yes in /etc/pulse/daemon.conf (the default on many distros), it is necessary to increase the rlimit-rttime value from its default of 200000 microseconds, presumably because of some calls to driver code taking much longer than in other audio drivers.

Not doing so causes pulseaudio to get killed by the kernel due to exceeding the amount of time it's allowed to spend scheduled with realtime priority without yielding. (This is likely to be experienced by the user as pulseaudio repeatedly restarting, since systemd will probably restart it immediately.)

I tested the same laptop with a variety of USB audio devices, with an otherwise identical pulseaudio config, and was able to use the default of 200000 microseconds with all of these without issues.

A configuration that works for me involves adding this line to /etc/pulse/daemon.conf:

rlimit-rttime = 3200000

This value (3.2 seconds) was found by repeatedly doubling until the issue no longer happened. It is excessively high and it would be good to find out why this driver blocks for so long where other drivers don't.

I get an error when trying to install it

so I ran make and got this error
make -C /lib/modules/5.11.3-300.fc34.x86_64/build M=/home/maximilian/mbp2018-bridge-drv modules
make[1]: *** /lib/modules/5.11.3-300.fc34.x86_64/build: No such file or directory. Stop.
make: *** [Makefile:10: all] Error 2

how do I avoid this

Okay, I, as dumbass, have a question (MBP2018 15") which’s answer could help others who didn't learn to code as well.

Hi, first of all, great work, that's awesome. Second, here is no tutorial whatsoever and the best I found is this

https://nixaid.com/linux-on-macbookpro/ (Grab his .iso)
Grab refind or this: https://github.com/GregoryConrad/BootableDriveMaker/releases/download/v7.0/Bootable.Drive.Maker.dmg
Make the internal disk bootable? Yes?
If I want my mac to sleep, I rather use your bridge in combination: https://github.com/MCMrARM/mbp2018-bridge-drv/tree/suspend-merge
(Just compiling the makefile? Where do I have to put the data?

and then (necessary or not?)
a new audio driver https://github.com/leifliddy/macbook12-audio-driver

= works? I can barely understand if I would have to change kexts etc. like with a Hackintosh, change some HEX in DSDT, or if this is a ready to use driver? The first one would be far over my head.

Building module with GCC 10.1 fails

First of all, thanks for the great work!

Not sure, if this is really an issue, but I had to downgrade to GCC 9.3 in order to be able to build the module.
Since I'm using Arch I yesterday updated both packages apple-bce-dkms-git and gcc (as well as gcc-libs). This led to a failing build of the apple-bce module. See the log:

DKMS make.log for apple-bce-r183.c884d9c for kernel 5.6.12-2-mbp (x86_64)
So 17. Mai 12:33:28 CEST 2020
make -C /lib/modules/5.6.12-2-mbp/build M=/var/lib/dkms/apple-bce/r183.c884d9c/build modules
make[1]: Verzeichnis „/usr/lib/modules/5.6.12-2-mbp/build“ wird betreten
  CC [M]  /var/lib/dkms/apple-bce/r183.c884d9c/build/apple_bce.o
  CC [M]  /var/lib/dkms/apple-bce/r183.c884d9c/build/mailbox.o
  CC [M]  /var/lib/dkms/apple-bce/r183.c884d9c/build/queue.o
  CC [M]  /var/lib/dkms/apple-bce/r183.c884d9c/build/queue_dma.o
  CC [M]  /var/lib/dkms/apple-bce/r183.c884d9c/build/vhci/vhci.o
  CC [M]  /var/lib/dkms/apple-bce/r183.c884d9c/build/vhci/queue.o
  CC [M]  /var/lib/dkms/apple-bce/r183.c884d9c/build/vhci/transfer.o
  CC [M]  /var/lib/dkms/apple-bce/r183.c884d9c/build/audio/audio.o
cc1: Fehler: incompatible gcc/plugin versions
cc1: Fehler: Plugin ./scripts/gcc-plugins/structleak_plugin.so kann nicht initialisiert werden
cc1: Fehler: incompatible gcc/plugin versions
cc1: Fehler: Plugin ./scripts/gcc-plugins/structleak_plugin.so kann nicht initialisiert werden
cc1: Fehler: incompatible gcc/plugin versions
cc1: Fehler: Plugin ./scripts/gcc-plugins/structleak_plugin.so kann nicht initialisiert werden
make[2]: *** [scripts/Makefile.build:268: /var/lib/dkms/apple-bce/r183.c884d9c/build/apple_bce.o] Fehler 1
make[2]: *** Es wird auf noch nicht beendete Prozesse gewartet....
make[2]: *** [scripts/Makefile.build:268: /var/lib/dkms/apple-bce/r183.c884d9c/build/mailbox.o] Fehler 1
make[2]: *** [scripts/Makefile.build:268: /var/lib/dkms/apple-bce/r183.c884d9c/build/queue.o] Fehler 1
cc1: Fehler: incompatible gcc/plugin versions
cc1: Fehler: Plugin ./scripts/gcc-plugins/structleak_plugin.so kann nicht initialisiert werden
cc1: Fehler: incompatible gcc/plugin versions
cc1: Fehler: Plugin ./scripts/gcc-plugins/structleak_plugin.so kann nicht initialisiert werden
make[2]: *** [scripts/Makefile.build:268: /var/lib/dkms/apple-bce/r183.c884d9c/build/vhci/vhci.o] Fehler 1
make[2]: *** [scripts/Makefile.build:268: /var/lib/dkms/apple-bce/r183.c884d9c/build/queue_dma.o] Fehler 1
cc1: Fehler: incompatible gcc/plugin versions
cc1: Fehler: Plugin ./scripts/gcc-plugins/structleak_plugin.so kann nicht initialisiert werden
make[2]: *** [scripts/Makefile.build:268: /var/lib/dkms/apple-bce/r183.c884d9c/build/vhci/queue.o] Fehler 1
cc1: Fehler: incompatible gcc/plugin versions
cc1: Fehler: Plugin ./scripts/gcc-plugins/structleak_plugin.so kann nicht initialisiert werden
make[2]: *** [scripts/Makefile.build:268: /var/lib/dkms/apple-bce/r183.c884d9c/build/vhci/transfer.o] Fehler 1
cc1: Fehler: incompatible gcc/plugin versions
cc1: Fehler: Plugin ./scripts/gcc-plugins/structleak_plugin.so kann nicht initialisiert werden
make[2]: *** [scripts/Makefile.build:268: /var/lib/dkms/apple-bce/r183.c884d9c/build/audio/audio.o] Fehler 1
make[1]: *** [Makefile:1684: /var/lib/dkms/apple-bce/r183.c884d9c/build] Fehler 2
make[1]: Verzeichnis „/usr/lib/modules/5.6.12-2-mbp/build“ wird verlassen
make: *** [Makefile:22: all] Fehler 2

does not build for 5.4-rc3

5.4 has nvme support
Unfortunately bce does not build under 5.4:

make -C /lib/modules/5.4.0-1-MANJARO/build M=/home/tmp/mbp2018-bridge-drv modules
make[1]: Entering directory '/usr/lib/modules/5.4.0-1-MANJARO/build'
  CC [M]  /home/tmp/mbp2018-bridge-drv/vhci/vhci.o
/home/tmp/mbp2018-bridge-drv/vhci/vhci.c: In function ‘bce_vhci_create’:
/home/tmp/mbp2018-bridge-drv/vhci/vhci.c:47:20: error: ‘struct usb_bus’ has no member named ‘uses_dma’
   47 |     vhci->hcd->self.uses_dma = 1;
      |                    ^
make[2]: *** [scripts/Makefile.build:266: /home/tmp/mbp2018-bridge-drv/vhci/vhci.o] Error 1
make[1]: *** [Makefile:1649: /home/tmp/mbp2018-bridge-drv] Error 2
make[1]: Leaving directory '/usr/lib/modules/5.4.0-1-MANJARO/build'
make: *** [Makefile:9: all] Error 2

I get endless messages in dmesg - macbookpro15,2

I get endless messages when calling dmesg -w:
[ 1357.225355] aaudio_pcm_pointer while not started
[ 1357.225358] aaudio_pcm_pointer while not started
[ 1357.225367] aaudio aaudio: Received timestamp update for dev=3a ts=13c00d72d84 seed=0
[ 1357.571800] aaudio aaudio: Received timestamp update for dev=3a ts=13c157e3d1d seed=0
[ 1357.918338] aaudio aaudio: Received timestamp update for dev=3a ts=13c2a256fd8 seed=0

And some errors when i try to open pavuucontrol mixer:
[ 1554.167998] aaudio: Backed up the buffer in 75388806ns [16640]
[ 1554.188094] aaudio: Started the audio device in 95484464ns
[ 1554.188110] aaudio_pcm_pointer while not started
[ 1554.188129] aaudio_pcm_pointer while not started
[ 1554.188461] aaudio_pcm_open
[ 1554.188530] aaudio_pcm_hw_params
[ 1554.188541] x86/PAT: pulseaudio:2668 map pfn RAM range req uncached-minus for [mem 0x79400000-0x79430fff], got write-back
[ 1554.190982] aaudio_pcm_trigger 1
[ 1554.192117] aaudio aaudio: Received timestamp update for dev=3a ts=169dcfa5542 seed=0
[ 1554.194244] aaudio: Started the audio device in 3254976ns
[ 1554.194292] aaudio_pcm_pointer while not started

Sometimes after calling pavucontrol starts out of sync sound

Provide release

We have this driver packaged in NixOS.

https://search.nixos.org/packages?channel=unstable&from=0&size=50&sort=relevance&query=mbp2018-bridge

It seems you removed the 0.01 release, what broke our kernel build.

Can you please provide releases?

builder for '/nix/store/i7rqvjkwwbfhrx8fnyip47fakaw9ld1l-source.drv' failed with exit code 1; last 8 log lines:
  
  trying https://github.com/MCMrARM/mbp2018-bridge-drv/archive/0.01.tar.gz
    % Total    % Received % Xferd  Average Speed   Time    Time     Time  Current
                                   Dload  Upload   Total   Spent    Left  Speed
  100   132  100   132    0     0    545      0 --:--:-- --:--:-- --:--:--   545
    0     0    0     0    0     0      0      0 --:--:-- --:--:-- --:--:--     0
  curl: (22) The requested URL returned error: 404 
  error: cannot download source from any mirror

Building module with GCC 11.2.0 fails

Hey there!
I'm encoutering build issues using gcc-11.2.0 .
I think this may be related to #15 , if you have any suggestions I'd be happy to try them!

  CC [M] /var/tmp/apple-bce-git/src/apple-bce/apple_bce.o
cc1: error: incompatible gcc/plugin versions
cc1: error: failed to initialize plugin ./scripts/gcc-plugins/structleak_plugin.so

Thanks!

merge suspend branch?

Thanks for all your hard work on this. The suspend branch works great, but it is without audio, can you merge the two branches so we can have both suspend and audio?

how do install it? is it even possible on PopOS

cloned it
then cded into the directory and typed make what else do i have to do?

Installation Issue

Hi,

I’m trying to install this driver on my machine running Kali Linux however I’m having trouble installing the driver. There doesn’t seem to be a dkms.conf file or install.sh file

Thanks!

Can't suspend with kernel 5.8-rc2 and Macbook pro 16

As per title,

The machine does not turn back on.

Doesn't build out of the box

Hello, I'm new to linux and I'm setting ubuntu up on my Macbook Pro 15.

When I run sudo make I get this:

$ sudo make
make -C /lib/modules/6.2.0-32-generic/build M= modules
make[1]: Entering directory '/usr/src/linux-headers-6.2.0-32-generic'
  SYNC    include/config/auto.conf.cmd
  LEX     scripts/kconfig/lexer.lex.c
/bin/sh: 1: flex: not found
make[3]: *** [scripts/Makefile.host:9: scripts/kconfig/lexer.lex.c] Error 127
make[2]: *** [Makefile:711: syncconfig] Error 2
Makefile:789: include/config/auto.conf.cmd: No such file or directory
make[1]: *** [Makefile:812: include/config/auto.conf.cmd] Error 2
make[1]: Leaving directory '/usr/src/linux-headers-6.2.0-32-generic'
make: *** [Makefile:10: all] Error 2

How to build

I'm a bit of a Linux noob here. I was just wondering what I should do to build the driver once it's been cloned onto the hard drive. Thank you.

Pulseaudio Crash On 5.5.6

Hi All,

Description

I'm not sure if this is an issue with my specific pulse audio config, or if its related to the recent update. But recently my pulseaudio has been crashing whenever I try to run it. The common theme from all the errors is service-start-limit-hit but even if i completly kill pulseaudio and try to only start it once, it still reports this error.

Things attempted:

Complete PulseAudio reinstall
Purging of Pulse cache files
Restarting systemd services.

Those sweet sweet logs

Below is some pulseaudio info as well as sys info:
pulseaudio --version

pulseaudio 13.0

pulseaudio -vvvv

I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
D: [pulseaudio] core-util.c: RealtimeKit worked.
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 13.0
D: [pulseaudio] main.c: Compilation host: x86_64
D: [pulseaudio] main.c: Compilation CFLAGS: Not yet supported on meson
D: [pulseaudio] main.c: Running on host: Linux x86_64 5.5.6-1-mbp #1 SMP PREEMPT Wed, 26 Feb 2020 02:34:29 +0000
D: [pulseaudio] main.c: Found 8 CPUs.
I: [pulseaudio] main.c: Page size is 4096 bytes
D: [pulseaudio] main.c: Compiled with Valgrind support: no
D: [pulseaudio] main.c: Running in valgrind mode: no
D: [pulseaudio] main.c: Running in VM: no
D: [pulseaudio] main.c: Running from build tree: no
D: [pulseaudio] main.c: Optimized build: yes
D: [pulseaudio] main.c: All asserts enabled.
I: [pulseaudio] main.c: Machine ID is a0af28e7e59545ffa2ff97619b1e7c6a.
I: [pulseaudio] main.c: Session ID is 5.
I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
I: [pulseaudio] main.c: Using state directory /home/jacob/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-13.0/modules.
I: [pulseaudio] main.c: Running in system mode: no
W: [pulseaudio] pid.c: Stale PID file, overwriting.
I: [pulseaudio] main.c: System supports high resolution timers
D: [pulseaudio] memblock.c: Using shared memfd memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2 
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/jacob/.config/pulse/a0af28e7e59545ffa2ff97619b1e7c6a-device-volumes.tdb'
I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/jacob/.config/pulse/a0af28e7e59545ffa2ff97619b1e7c6a-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/jacob/.config/pulse/a0af28e7e59545ffa2ff97619b1e7c6a-stream-volumes.tdb'
I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/jacob/.config/pulse/a0af28e7e59545ffa2ff97619b1e7c6a-stream-volumes'.
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry2
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry3
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry4
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry5
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry6
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry7
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry8
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry9
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry10
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry11
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry12
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry13
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry14
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry15
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry16
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry17
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry18
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry19
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry20
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry21
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry22
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry23
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry24
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry25
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry26
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry27
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry28
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry29
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry30
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry31
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry32
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry33
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry34
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry35
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry36
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry37
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry38
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry39
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry40
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry41
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry42
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry43
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry44
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry45
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry46
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry47
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry48
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry49
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/jacob/.config/pulse/a0af28e7e59545ffa2ff97619b1e7c6a-card-database.tdb'
I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/jacob/.config/pulse/a0af28e7e59545ffa2ff97619b1e7c6a-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-13.0/modules/module-udev-detect.so': success
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:1d.4/0000:02:00.3/aaudio/aaudio/card0 is busy: no
D: [pulseaudio] module-udev-detect.c: Loading module-alsa-card with arguments 'device_id="0" name="pci-0000_02_00.3" card_name="alsa_card.pci-0000_02_00.3" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"'
D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus e7af6f7c6437f2d1152bb6685e56b501 as :1.415
D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0'
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm2/Apple T2 Audio/Apple T2 Audio.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card Apple T2 Audio
I: [pulseaudio] (alsa-lib)main.c: error: failed to import Apple T2 Audio use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card Apple T2 Audio
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/profile-sets/apple-t2.conf'
D: [pulseaudio] alsa-mixer.c: Profile output:builtin-speaker+input:builtin-mic supported.
D: [pulseaudio] alsa-mixer.c: Looking at profile output:codec-output+input:builtin-mic
D: [pulseaudio] alsa-mixer.c: Checking for playback on Headphone (codec-output)
D: [pulseaudio] alsa-util.c: Trying front:0,1 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open front:0,1
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Signed 16 bit Little Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Signed 16 bit Big Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Float 32 bit Little Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Float 32 bit Big Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Signed 32 bit Little Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Signed 32 bit Big Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 346 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4797 samples), period size second (to 1199 samples).
I: [pulseaudio] alsa-util.c: Device front:0,1 doesn't support 44100 Hz, changed to 48000 Hz.
I: [pulseaudio] alsa-util.c: Device front:0,1 doesn't support sample format s16le, changed to s24-32le.
D: [pulseaudio] alsa-mixer.c: Checking for recording on Built-in Mic (builtin-mic)
D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open front:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Signed 16 bit Little Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Signed 16 bit Big Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Float 32 bit Little Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Float 32 bit Big Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Signed 32 bit Little Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Signed 32 bit Big Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 346 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4797 samples), period size second (to 1199 samples).
I: [pulseaudio] alsa-util.c: Device front:0 doesn't support 44100 Hz, changed to 48000 Hz.
I: [pulseaudio] alsa-util.c: Device front:0 doesn't support sample format s16le, changed to s24-32le.
D: [pulseaudio] alsa-mixer.c: Profile output:codec-output+input:builtin-mic supported.
D: [pulseaudio] conf-parser.c: Failed to open configuration file '/usr/share/pulseaudio/alsa-mixer/paths/codec-output.conf': No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0,1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0,1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
D: [pulseaudio] alsa-mixer.c: Probing path 'codec-output'
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x564c874327b0, direction=1
D: [pulseaudio] alsa-mixer.c: Path codec-output (codec-output), direction=1, priority=0, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
D: [pulseaudio] alsa-mixer.c: Looking at profile output:codec-output+input:codec-input
D: [pulseaudio] alsa-mixer.c: Checking for recording on Headphone Mic (codec-input)
D: [pulseaudio] alsa-util.c: Trying front:0,1 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open front:0,1
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Signed 16 bit Little Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Signed 16 bit Big Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Float 32 bit Little Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Float 32 bit Big Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 346 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4797 samples), period size second (to 1199 samples).
I: [pulseaudio] alsa-util.c: Device front:0,1 doesn't support 44100 Hz, changed to 48000 Hz.
I: [pulseaudio] alsa-util.c: Device front:0,1 doesn't support sample format s16le, changed to s32le.
D: [pulseaudio] alsa-mixer.c: Profile output:codec-output+input:codec-input supported.
D: [pulseaudio] alsa-mixer.c: Looking at profile output:builtin-speaker+input:codec-input
D: [pulseaudio] alsa-mixer.c: Checking for playback on Built-in Speaker (builtin-speaker)
D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open front:0
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Signed 16 bit Little Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Signed 16 bit Big Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Float 32 bit Little Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Float 32 bit Big Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Signed 32 bit Little Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Signed 32 bit Big Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 346 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4797 samples), period size second (to 1199 samples).
I: [pulseaudio] alsa-util.c: Device front:0 doesn't support 44100 Hz, changed to 48000 Hz.
I: [pulseaudio] alsa-util.c: Device front:0 doesn't support sample format s16le, changed to s24-32le.
D: [pulseaudio] alsa-mixer.c: Profile output:builtin-speaker+input:codec-input supported.
D: [pulseaudio] conf-parser.c: Failed to open configuration file '/usr/share/pulseaudio/alsa-mixer/paths/builtin-speaker-output.conf': No such file or directory
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
D: [pulseaudio] alsa-mixer.c: Probing path 'builtin-speaker-output'
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x564c87435a00, direction=1
D: [pulseaudio] alsa-mixer.c: Path builtin-speaker-output (builtin-speaker-output), direction=1, priority=0, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
D: [pulseaudio] alsa-mixer.c: Profile set 0x564c87425300, auto_profiles=no, probed=yes, n_mappings=4, n_profiles=4, n_decibel_fixes=0
D: [pulseaudio] alsa-mixer.c: Mapping builtin-speaker (Built-in Speaker), priority=100, channel_map=front-left,front-right,rear-left,rear-right, supported=yes, direction=1
D: [pulseaudio] alsa-mixer.c: Mapping builtin-mic (Built-in Mic), priority=100, channel_map=front-left,front-center,front-right, supported=yes, direction=2
D: [pulseaudio] alsa-mixer.c: Mapping codec-output (Headphone), priority=150, channel_map=front-left,front-right, supported=yes, direction=1
D: [pulseaudio] alsa-mixer.c: Mapping codec-input (Headphone Mic), priority=100, channel_map=mono, supported=yes, direction=2
D: [pulseaudio] alsa-mixer.c: Profile output:builtin-speaker+input:builtin-mic (Built-in Speaker + Built-in Mic), input=(null), output=(null) priority=0, supported=yes n_input_mappings=1, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Input builtin-mic
D: [pulseaudio] alsa-mixer.c: Output builtin-speaker
D: [pulseaudio] alsa-mixer.c: Profile output:codec-output+input:builtin-mic (Headphones + Built-in Mic), input=(null), output=(null) priority=0, supported=yes n_input_mappings=1, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Input builtin-mic
D: [pulseaudio] alsa-mixer.c: Output codec-output
D: [pulseaudio] alsa-mixer.c: Profile output:codec-output+input:codec-input (Headphones + External Mic), input=(null), output=(null) priority=0, supported=yes n_input_mappings=1, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Input codec-input
D: [pulseaudio] alsa-mixer.c: Output codec-output
D: [pulseaudio] alsa-mixer.c: Profile output:builtin-speaker+input:codec-input (Built-in Speaker + External Mic), input=(null), output=(null) priority=0, supported=yes n_input_mappings=1, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Input codec-input
D: [pulseaudio] alsa-mixer.c: Output builtin-speaker
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_02_00.3.
D: [pulseaudio] module-alsa-card.c: Found 0 jacks.
D: [pulseaudio] card.c: Looking for initial profile for card alsa_card.pci-0000_02_00.3
D: [pulseaudio] card.c: output:builtin-speaker+input:builtin-mic availability unknown
D: [pulseaudio] card.c: output:codec-output+input:builtin-mic availability unknown
D: [pulseaudio] card.c: output:codec-output+input:codec-input availability unknown
D: [pulseaudio] card.c: output:builtin-speaker+input:codec-input availability unknown
D: [pulseaudio] card.c: off availability unknown
I: [pulseaudio] card.c: alsa_card.pci-0000_02_00.3: active_profile: output:builtin-speaker+input:builtin-mic
I: [pulseaudio] module-card-restore.c: Restoring profile 'output:codec-output+input:builtin-mic' for card alsa_card.pci-0000_02_00.3.
D: [pulseaudio] card.c: alsa_card.pci-0000_02_00.3: active_profile: output:builtin-speaker+input:builtin-mic -> output:codec-output+input:builtin-mic
I: [pulseaudio] card.c: Created 0 "alsa_card.pci-0000_02_00.3"
D: [pulseaudio] reserve-wrap.c: Successfully create reservation lock monitor for device 'Audio0'
D: [pulseaudio] alsa-util.c: Trying front:0,1 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open front:0,1
I: [pulseaudio] alsa-util.c: Cannot disable ALSA period wakeups
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Signed 16 bit Little Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Signed 16 bit Big Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Float 32 bit Little Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Float 32 bit Big Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Signed 32 bit Little Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Signed 32 bit Big Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 346 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 96000 samples), period size second (to 96000 samples).
I: [pulseaudio] alsa-util.c: Device front:0,1 doesn't support 44100 Hz, changed to 48000 Hz.
I: [pulseaudio] alsa-util.c: Device front:0,1 doesn't support sample format s16le, changed to s24-32le.
I: [pulseaudio] alsa-util.c: ALSA period wakeups were not disabled
I: [pulseaudio] alsa-sink.c: Successfully opened device front:0,1.
I: [pulseaudio] alsa-sink.c: Selected mapping 'Headphone' (codec-output).
I: [pulseaudio] alsa-sink.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-sink.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0,1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0,1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
D: [pulseaudio] alsa-mixer.c: Added 1 ports
I: [pulseaudio] module-device-restore.c: Restoring volume for sink alsa_output.pci-0000_02_00.3.codec-output: front-left: 0 /   0%,   front-right: 0 /   0%
I: [pulseaudio] module-device-restore.c: Restoring mute state for sink alsa_output.pci-0000_02_00.3.codec-output: muted
I: [pulseaudio] sink.c: Created sink 0 "alsa_output.pci-0000_02_00.3.codec-output" with sample spec s24-32le 2ch 48000Hz and channel map front-left,front-right
I: [pulseaudio] sink.c:     alsa.resolution_bits = "32"
I: [pulseaudio] sink.c:     device.api = "alsa"
I: [pulseaudio] sink.c:     device.class = "sound"
I: [pulseaudio] sink.c:     alsa.class = "generic"
I: [pulseaudio] sink.c:     alsa.subclass = "generic-mix"
I: [pulseaudio] sink.c:     alsa.name = "Codec Output"
I: [pulseaudio] sink.c:     alsa.id = "Codec Output"
I: [pulseaudio] sink.c:     alsa.subdevice = "0"
I: [pulseaudio] sink.c:     alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] sink.c:     alsa.device = "2"
I: [pulseaudio] sink.c:     alsa.card = "0"
I: [pulseaudio] sink.c:     alsa.card_name = "Apple T2 Audio"
I: [pulseaudio] sink.c:     alsa.long_card_name = "Apple T2 Audio"
I: [pulseaudio] sink.c:     device.bus_path = "pci-0000:02:00.3"
I: [pulseaudio] sink.c:     sysfs.path = "/devices/pci0000:00/0000:00:1d.4/0000:02:00.3/aaudio/aaudio/card0"
I: [pulseaudio] sink.c:     device.bus = "pci"
I: [pulseaudio] sink.c:     device.vendor.id = "106b"
I: [pulseaudio] sink.c:     device.vendor.name = "Apple Inc."
I: [pulseaudio] sink.c:     device.product.id = "1803"
I: [pulseaudio] sink.c:     device.product.name = "Apple Audio Device"
I: [pulseaudio] sink.c:     device.string = "front:0,1"
I: [pulseaudio] sink.c:     device.buffering.buffer_size = "133120"
I: [pulseaudio] sink.c:     device.buffering.fragment_size = "8"
I: [pulseaudio] sink.c:     device.access_mode = "mmap+timer"
I: [pulseaudio] sink.c:     device.profile.name = "codec-output"
I: [pulseaudio] sink.c:     device.profile.description = "Headphone"
I: [pulseaudio] sink.c:     device.description = "Apple Audio Device Headphone"
I: [pulseaudio] sink.c:     alsa.mixer_name = "Apple T2 Audio"
I: [pulseaudio] sink.c:     module-udev-detect.discovered = "1"
I: [pulseaudio] sink.c:     device.icon_name = "audio-card-pci"
I: [pulseaudio] module-device-restore.c: Restoring volume for source alsa_output.pci-0000_02_00.3.codec-output.monitor: front-left: 66191 / 101%,   front-right: 66191 / 101%
I: [pulseaudio] source.c: Created source 0 "alsa_output.pci-0000_02_00.3.codec-output.monitor" with sample spec s24-32le 2ch 48000Hz and channel map front-left,front-right
I: [pulseaudio] source.c:     device.description = "Monitor of Apple Audio Device Headphone"
I: [pulseaudio] source.c:     device.class = "monitor"
I: [pulseaudio] source.c:     alsa.card = "0"
I: [pulseaudio] source.c:     alsa.card_name = "Apple T2 Audio"
I: [pulseaudio] source.c:     alsa.long_card_name = "Apple T2 Audio"
I: [pulseaudio] source.c:     device.bus_path = "pci-0000:02:00.3"
I: [pulseaudio] source.c:     sysfs.path = "/devices/pci0000:00/0000:00:1d.4/0000:02:00.3/aaudio/aaudio/card0"
I: [pulseaudio] source.c:     device.bus = "pci"
I: [pulseaudio] source.c:     device.vendor.id = "106b"
I: [pulseaudio] source.c:     device.vendor.name = "Apple Inc."
I: [pulseaudio] source.c:     device.product.id = "1803"
I: [pulseaudio] source.c:     device.product.name = "Apple Audio Device"
I: [pulseaudio] source.c:     device.string = "0"
I: [pulseaudio] source.c:     module-udev-detect.discovered = "1"
I: [pulseaudio] source.c:     device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-sink.c: Using 16640.0 fragments of size 8 bytes (0.02ms), buffer size is 133120 bytes (346.67ms)
I: [pulseaudio] alsa-sink.c: Time scheduling watermark is 9.21ms
D: [pulseaudio] alsa-sink.c: hwbuf_unused=0
D: [pulseaudio] alsa-sink.c: setting avail_min=16198
D: [pulseaudio] alsa-mixer.c: Activating path codec-output
D: [pulseaudio] alsa-mixer.c: Path codec-output (codec-output), direction=1, priority=0, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
I: [pulseaudio] alsa-sink.c: Driver does not support hardware volume control, falling back to software volume control.
I: [pulseaudio] alsa-sink.c: Driver does not support hardware mute control, falling back to software mute control.
D: [pulseaudio] alsa-util.c: snd_pcm_dump():
D: [pulseaudio] alsa-util.c: Hardware PCM card 0 'Apple T2 Audio' device 2 subdevice 0
D: [pulseaudio] alsa-util.c: Its setup is:
D: [pulseaudio] alsa-util.c:   stream       : PLAYBACK
D: [pulseaudio] alsa-util.c:   access       : MMAP_INTERLEAVED
D: [pulseaudio] alsa-util.c:   format       : S24_LE
D: [pulseaudio] alsa-util.c:   subformat    : STD
D: [pulseaudio] alsa-util.c:   channels     : 2
D: [pulseaudio] alsa-util.c:   rate         : 48000
D: [pulseaudio] alsa-util.c:   exact rate   : 48000 (48000/1)
D: [pulseaudio] alsa-util.c:   msbits       : 32
D: [pulseaudio] alsa-util.c:   buffer_size  : 16640
D: [pulseaudio] alsa-util.c:   period_size  : 1
D: [pulseaudio] alsa-util.c:   period_time  : 20
D: [pulseaudio] alsa-util.c:   tstamp_mode  : ENABLE
D: [pulseaudio] alsa-util.c:   tstamp_type  : MONOTONIC
D: [pulseaudio] alsa-util.c:   period_step  : 1
D: [pulseaudio] alsa-util.c:   avail_min    : 16198
D: [pulseaudio] alsa-util.c:   period_event : 0
D: [pulseaudio] alsa-util.c:   start_threshold  : -1
D: [pulseaudio] alsa-util.c:   stop_threshold   : 4683743612465315840
D: [pulseaudio] alsa-util.c:   silence_threshold: 0
D: [pulseaudio] alsa-util.c:   silence_size : 0
D: [pulseaudio] alsa-util.c:   boundary     : 4683743612465315840
D: [pulseaudio] alsa-util.c:   appl_ptr     : 0
D: [pulseaudio] alsa-util.c:   hw_ptr       : 0
D: [alsa-sink-Codec Output] alsa-sink.c: Thread starting up
D: [alsa-sink-Codec Output] util.c: RealtimeKit worked.
I: [alsa-sink-Codec Output] util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
D: [pulseaudio] sink.c: alsa_output.pci-0000_02_00.3.codec-output: state: INIT -> IDLE
I: [alsa-sink-Codec Output] alsa-sink.c: Starting playback.
D: [alsa-sink-Codec Output] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [alsa-sink-Codec Output] alsa-sink.c: Cutting sleep time for the initial iterations by half.
D: [pulseaudio] source.c: alsa_output.pci-0000_02_00.3.codec-output.monitor: state: INIT -> IDLE
I: [pulseaudio] core.c: default_source: (unset) -> alsa_output.pci-0000_02_00.3.codec-output.monitor
D: [pulseaudio] module-device-restore.c: Could not set format on sink alsa_output.pci-0000_02_00.3.codec-output
I: [pulseaudio] core.c: default_sink: (unset) -> alsa_output.pci-0000_02_00.3.codec-output
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open front:0
I: [pulseaudio] alsa-util.c: Cannot disable ALSA period wakeups
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Signed 16 bit Little Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Signed 16 bit Big Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Float 32 bit Little Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Float 32 bit Big Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Signed 32 bit Little Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: snd_pcm_hw_params_set_format(Signed 32 bit Big Endian) failed: Invalid argument
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 346 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 96000 samples), period size second (to 96000 samples).
I: [pulseaudio] alsa-util.c: Device front:0 doesn't support 44100 Hz, changed to 48000 Hz.
I: [pulseaudio] alsa-util.c: Device front:0 doesn't support sample format s16le, changed to s24-32le.
I: [pulseaudio] alsa-util.c: ALSA period wakeups were not disabled
I: [pulseaudio] alsa-source.c: Successfully opened device front:0.
I: [pulseaudio] alsa-source.c: Selected mapping 'Built-in Mic' (builtin-mic).
I: [pulseaudio] alsa-source.c: Successfully enabled mmap() mode.
I: [pulseaudio] alsa-source.c: Successfully enabled timer-based scheduling mode.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL front:0
I: [pulseaudio] alsa-util.c: Unable to attach to mixer front:0: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:0'
I: [pulseaudio] module-device-restore.c: Restoring volume for source alsa_input.pci-0000_02_00.3.builtin-mic: front-left: 300000 / 458%,   front-center: 300000 / 458%,   front-right: 300000 / 458%
I: [pulseaudio] module-device-restore.c: Restoring mute state for source alsa_input.pci-0000_02_00.3.builtin-mic: unmuted
I: [pulseaudio] source.c: Created source 1 "alsa_input.pci-0000_02_00.3.builtin-mic" with sample spec s24-32le 3ch 48000Hz and channel map front-left,front-center,front-right
I: [pulseaudio] source.c:     alsa.resolution_bits = "32"
I: [pulseaudio] source.c:     device.api = "alsa"
I: [pulseaudio] source.c:     device.class = "sound"
I: [pulseaudio] source.c:     alsa.class = "generic"
I: [pulseaudio] source.c:     alsa.subclass = "generic-mix"
I: [pulseaudio] source.c:     alsa.name = "Digital Mic"
I: [pulseaudio] source.c:     alsa.id = "Digital Mic"
I: [pulseaudio] source.c:     alsa.subdevice = "0"
I: [pulseaudio] source.c:     alsa.subdevice_name = "subdevice #0"
I: [pulseaudio] source.c:     alsa.device = "1"
I: [pulseaudio] source.c:     alsa.card = "0"
I: [pulseaudio] source.c:     alsa.card_name = "Apple T2 Audio"
I: [pulseaudio] source.c:     alsa.long_card_name = "Apple T2 Audio"
I: [pulseaudio] source.c:     device.bus_path = "pci-0000:02:00.3"
I: [pulseaudio] source.c:     sysfs.path = "/devices/pci0000:00/0000:00:1d.4/0000:02:00.3/aaudio/aaudio/card0"
I: [pulseaudio] source.c:     device.bus = "pci"
I: [pulseaudio] source.c:     device.vendor.id = "106b"
I: [pulseaudio] source.c:     device.vendor.name = "Apple Inc."
I: [pulseaudio] source.c:     device.product.id = "1803"
I: [pulseaudio] source.c:     device.product.name = "Apple Audio Device"
I: [pulseaudio] source.c:     device.string = "front:0"
I: [pulseaudio] source.c:     device.buffering.buffer_size = "199680"
I: [pulseaudio] source.c:     device.buffering.fragment_size = "12"
I: [pulseaudio] source.c:     device.access_mode = "mmap+timer"
I: [pulseaudio] source.c:     device.profile.name = "builtin-mic"
I: [pulseaudio] source.c:     device.profile.description = "Built-in Mic"
I: [pulseaudio] source.c:     device.description = "Apple Audio Device Built-in Mic"
I: [pulseaudio] source.c:     alsa.mixer_name = "Apple T2 Audio"
I: [pulseaudio] source.c:     module-udev-detect.discovered = "1"
I: [pulseaudio] source.c:     device.icon_name = "audio-card-pci"
I: [pulseaudio] alsa-source.c: Using 16640.0 fragments of size 12 bytes (0.02ms), buffer size is 199680 bytes (346.67ms)
I: [pulseaudio] alsa-source.c: Time scheduling watermark is 6.12ms
D: [pulseaudio] alsa-source.c: hwbuf_unused=0
D: [pulseaudio] alsa-source.c: setting avail_min=16346
D: [pulseaudio] alsa-util.c: snd_pcm_dump():
D: [pulseaudio] alsa-util.c: Hardware PCM card 0 'Apple T2 Audio' device 1 subdevice 0
D: [pulseaudio] alsa-util.c: Its setup is:
D: [pulseaudio] alsa-util.c:   stream       : CAPTURE
D: [pulseaudio] alsa-util.c:   access       : MMAP_INTERLEAVED
D: [pulseaudio] alsa-util.c:   format       : S24_LE
D: [pulseaudio] alsa-util.c:   subformat    : STD
D: [pulseaudio] alsa-util.c:   channels     : 3
D: [pulseaudio] alsa-util.c:   rate         : 48000
D: [pulseaudio] alsa-util.c:   exact rate   : 48000 (48000/1)
D: [pulseaudio] alsa-util.c:   msbits       : 32
D: [pulseaudio] alsa-util.c:   buffer_size  : 16640
D: [pulseaudio] alsa-util.c:   period_size  : 1
D: [pulseaudio] alsa-util.c:   period_time  : 20
D: [pulseaudio] alsa-util.c:   tstamp_mode  : ENABLE
D: [pulseaudio] alsa-util.c:   tstamp_type  : MONOTONIC
D: [pulseaudio] alsa-util.c:   period_step  : 1
D: [pulseaudio] alsa-util.c:   avail_min    : 16346
D: [pulseaudio] alsa-util.c:   period_event : 0
D: [pulseaudio] alsa-util.c:   start_threshold  : -1
D: [pulseaudio] alsa-util.c:   stop_threshold   : 4683743612465315840
D: [pulseaudio] alsa-util.c:   silence_threshold: 0
D: [pulseaudio] alsa-util.c:   silence_size : 0
D: [pulseaudio] alsa-util.c:   boundary     : 4683743612465315840
D: [pulseaudio] alsa-util.c:   appl_ptr     : 0
D: [pulseaudio] alsa-util.c:   hw_ptr       : 0
D: [alsa-source-Digital Mic] alsa-source.c: Thread starting up
D: [alsa-source-Digital Mic] util.c: RealtimeKit worked.
I: [alsa-source-Digital Mic] util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
I: [alsa-source-Digital Mic] alsa-source.c: Starting capture.
D: [pulseaudio] source.c: alsa_input.pci-0000_02_00.3.builtin-mic: state: INIT -> IDLE
I: [pulseaudio] core.c: default_source: alsa_output.pci-0000_02_00.3.codec-output.monitor -> alsa_input.pci-0000_02_00.3.builtin-mic
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #6; argument: "device_id="0" name="pci-0000_02_00.3" card_name="alsa_card.pci-0000_02_00.3" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1d.4/0000:02:00.3/aaudio/aaudio/card0 (alsa_card.pci-0000_02_00.3) module loaded.
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:1f.3/sound/card1 is busy: no
D: [pulseaudio] module-udev-detect.c: Loading module-alsa-card with arguments 'device_id="1" name="pci-0000_00_1f.3" card_name="alsa_card.pci-0000_00_1f.3" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"'
D: [pulseaudio] reserve-wrap.c: Successfully acquired reservation lock on device 'Audio1'
I: [pulseaudio] (alsa-lib)utils.c: could not open configuration file /usr/share/alsa/ucm2/HDA Intel PCH/HDA Intel PCH.conf
I: [pulseaudio] (alsa-lib)parser.c: error: could not parse configuration for card HDA Intel PCH
I: [pulseaudio] (alsa-lib)main.c: error: failed to import HDA Intel PCH use case configuration -2
I: [pulseaudio] alsa-ucm.c: UCM not available for card HDA Intel PCH
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/profile-sets/default.conf'
D: [pulseaudio] alsa-mixer.c: Looking at profile input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
D: [pulseaudio] alsa-util.c: Trying iec958:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Stereo (analog-stereo)
D: [pulseaudio] alsa-util.c: Trying front:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] alsa-util.c: Error opening PCM device front:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:analog-stereo - will not be able to open output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:iec958-stereo - will not be able to open output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-21
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 2.1 (analog-surround-21)
D: [pulseaudio] alsa-util.c: Trying surround21:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] alsa-util.c: Error opening PCM device surround21:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-21
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-21+input:analog-stereo - will not be able to open output:analog-surround-21
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-21+input:iec958-stereo - will not be able to open output:analog-surround-21
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-40
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.0 (analog-surround-40)
D: [pulseaudio] alsa-util.c: Trying surround40:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] alsa-util.c: Error opening PCM device surround40:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:analog-stereo - will not be able to open output:analog-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:iec958-stereo - will not be able to open output:analog-surround-40
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-41
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 4.1 (analog-surround-41)
D: [pulseaudio] alsa-util.c: Trying surround41:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] alsa-util.c: Error opening PCM device surround41:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-41
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:analog-stereo - will not be able to open output:analog-surround-41
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:iec958-stereo - will not be able to open output:analog-surround-41
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-50
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.0 (analog-surround-50)
D: [pulseaudio] alsa-util.c: Trying surround50:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] alsa-util.c: Error opening PCM device surround50:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-50
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:analog-stereo - will not be able to open output:analog-surround-50
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:iec958-stereo - will not be able to open output:analog-surround-50
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-51
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 5.1 (analog-surround-51)
D: [pulseaudio] alsa-util.c: Trying surround51:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] alsa-util.c: Error opening PCM device surround51:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:analog-stereo - will not be able to open output:analog-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:iec958-stereo - will not be able to open output:analog-surround-51
D: [pulseaudio] alsa-mixer.c: Looking at profile output:analog-surround-71
D: [pulseaudio] alsa-mixer.c: Checking for playback on Analog Surround 7.1 (analog-surround-71)
D: [pulseaudio] alsa-util.c: Trying surround71:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] alsa-util.c: Error opening PCM device surround71:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:analog-surround-71
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:analog-stereo - will not be able to open output:analog-surround-71
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:iec958-stereo - will not be able to open output:analog-surround-71
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (IEC958) (iec958-stereo)
D: [pulseaudio] alsa-util.c: Trying iec958:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] alsa-util.c: Error opening PCM device iec958:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:analog-stereo - will not be able to open output:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:iec958-stereo - will not be able to open output:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
D: [pulseaudio] alsa-util.c: Trying a52:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:analog-stereo - will not be able to open output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:iec958-stereo - will not be able to open output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
D: [pulseaudio] alsa-util.c: Trying a52:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM a52:1
I: [pulseaudio] alsa-util.c: Error opening PCM device a52:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:analog-stereo - will not be able to open output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:iec958-stereo - will not be able to open output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Looking at profile output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/DTS) (iec958-dts-surround-51)
D: [pulseaudio] alsa-util.c: Trying dca:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dca:1
I: [pulseaudio] alsa-util.c: Error opening PCM device dca:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:analog-stereo - will not be able to open output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:iec958-stereo - will not be able to open output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo)
D: [pulseaudio] alsa-util.c: Trying hdmi:1 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hdmi:1
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo supported.
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/hdmi-output-0.conf'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
D: [pulseaudio] alsa-mixer.c: Probing path 'hdmi-output-0'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'HDMI/DP,pcm=3 Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x564c875bc4f0, direction=1
D: [pulseaudio] alsa-mixer.c: Path hdmi-output-0 (HDMI / DisplayPort), direction=1, priority=59, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP, alsa_name='HDMI/DP,pcm=3 Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:analog-stereo - will not be able to open input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:iec958-stereo - will not be able to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI) (hdmi-surround)
D: [pulseaudio] alsa-util.c: Trying hdmi:1 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hdmi:1
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 7925 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround supported.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x564c875b9d20, direction=1
D: [pulseaudio] alsa-mixer.c: Path hdmi-output-0 (HDMI / DisplayPort), direction=1, priority=59, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP, alsa_name='HDMI/DP,pcm=3 Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround+input:analog-stereo - will not be able to open input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround+input:iec958-stereo - will not be able to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround71
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 7.1 (HDMI) (hdmi-surround71)
D: [pulseaudio] alsa-util.c: Trying hdmi:1 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hdmi:1
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 5944 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround71 supported.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x564c875bd610, direction=1
D: [pulseaudio] alsa-mixer.c: Path hdmi-output-0 (HDMI / DisplayPort), direction=1, priority=59, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP, alsa_name='HDMI/DP,pcm=3 Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71+input:analog-stereo - will not be able to open input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71+input:iec958-stereo - will not be able to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-dts-surround
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI/DTS) (hdmi-dts-surround)
D: [pulseaudio] alsa-util.c: Trying dcahdmi:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-dts-surround
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround+input:analog-stereo - will not be able to open output:hdmi-dts-surround
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround+input:iec958-stereo - will not be able to open output:hdmi-dts-surround
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo-extra1
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI 2) (hdmi-stereo-extra1)
D: [pulseaudio] alsa-util.c: Trying hdmi:1,1 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hdmi:1,1
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo-extra1 supported.
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/hdmi-output-1.conf'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
D: [pulseaudio] alsa-mixer.c: Probing path 'hdmi-output-1'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'HDMI/DP,pcm=7 Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x564c875bdfe0, direction=1
D: [pulseaudio] alsa-mixer.c: Path hdmi-output-1 (HDMI / DisplayPort 2), direction=1, priority=58, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP, alsa_name='HDMI/DP,pcm=7 Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra1+input:analog-stereo - will not be able to open input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra1+input:iec958-stereo - will not be able to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround-extra1
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI 2) (hdmi-surround-extra1)
D: [pulseaudio] alsa-util.c: Trying hdmi:1,1 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hdmi:1,1
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 7925 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround-extra1 supported.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x564c87435c80, direction=1
D: [pulseaudio] alsa-mixer.c: Path hdmi-output-1 (HDMI / DisplayPort 2), direction=1, priority=58, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP, alsa_name='HDMI/DP,pcm=7 Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra1+input:analog-stereo - will not be able to open input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra1+input:iec958-stereo - will not be able to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround71-extra1
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 7.1 (HDMI 2) (hdmi-surround71-extra1)
D: [pulseaudio] alsa-util.c: Trying hdmi:1,1 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hdmi:1,1
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 5944 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround71-extra1 supported.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,1
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,1: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x564c875bd380, direction=1
D: [pulseaudio] alsa-mixer.c: Path hdmi-output-1 (HDMI / DisplayPort 2), direction=1, priority=58, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP, alsa_name='HDMI/DP,pcm=7 Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra1+input:analog-stereo - will not be able to open input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra1+input:iec958-stereo - will not be able to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-dts-surround-extra1
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI 2/DTS) (hdmi-dts-surround-extra1)
D: [pulseaudio] alsa-util.c: Trying dcahdmi:1,1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,1
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-dts-surround-extra1
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra1+input:analog-stereo - will not be able to open output:hdmi-dts-surround-extra1
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra1+input:iec958-stereo - will not be able to open output:hdmi-dts-surround-extra1
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo-extra2
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI 3) (hdmi-stereo-extra2)
D: [pulseaudio] alsa-util.c: Trying hdmi:1,2 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hdmi:1,2
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo-extra2 supported.
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/hdmi-output-2.conf'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
D: [pulseaudio] alsa-mixer.c: Probing path 'hdmi-output-2'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'HDMI/DP,pcm=8 Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x564c875bdf90, direction=1
D: [pulseaudio] alsa-mixer.c: Path hdmi-output-2 (HDMI / DisplayPort 3), direction=1, priority=57, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP, alsa_name='HDMI/DP,pcm=8 Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra2+input:analog-stereo - will not be able to open input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra2+input:iec958-stereo - will not be able to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround-extra2
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI 3) (hdmi-surround-extra2)
D: [pulseaudio] alsa-util.c: Trying hdmi:1,2 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hdmi:1,2
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 7925 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround-extra2 supported.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x564c875bffe0, direction=1
D: [pulseaudio] alsa-mixer.c: Path hdmi-output-2 (HDMI / DisplayPort 3), direction=1, priority=57, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP, alsa_name='HDMI/DP,pcm=8 Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra2+input:analog-stereo - will not be able to open input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra2+input:iec958-stereo - will not be able to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround71-extra2
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 7.1 (HDMI 3) (hdmi-surround71-extra2)
D: [pulseaudio] alsa-util.c: Trying hdmi:1,2 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hdmi:1,2
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 5944 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround71-extra2 supported.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,2
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,2: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x564c875c08f0, direction=1
D: [pulseaudio] alsa-mixer.c: Path hdmi-output-2 (HDMI / DisplayPort 3), direction=1, priority=57, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP, alsa_name='HDMI/DP,pcm=8 Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra2+input:analog-stereo - will not be able to open input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra2+input:iec958-stereo - will not be able to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-dts-surround-extra2
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI 3/DTS) (hdmi-dts-surround-extra2)
D: [pulseaudio] alsa-util.c: Trying dcahdmi:1,2 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,2
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,2: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-dts-surround-extra2
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra2+input:analog-stereo - will not be able to open output:hdmi-dts-surround-extra2
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra2+input:iec958-stereo - will not be able to open output:hdmi-dts-surround-extra2
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo-extra3
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI 4) (hdmi-stereo-extra3)
D: [pulseaudio] alsa-util.c: Trying hdmi:1,3 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hdmi:1,3
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo-extra3 supported.
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/hdmi-output-3.conf'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
D: [pulseaudio] alsa-mixer.c: Probing path 'hdmi-output-3'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'HDMI/DP,pcm=9 Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x564c875be640, direction=1
D: [pulseaudio] alsa-mixer.c: Path hdmi-output-3 (HDMI / DisplayPort 4), direction=1, priority=56, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP, alsa_name='HDMI/DP,pcm=9 Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra3+input:analog-stereo - will not be able to open input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra3+input:iec958-stereo - will not be able to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround-extra3
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI 4) (hdmi-surround-extra3)
D: [pulseaudio] alsa-util.c: Trying hdmi:1,3 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hdmi:1,3
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 7925 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround-extra3 supported.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x564c875c20e0, direction=1
D: [pulseaudio] alsa-mixer.c: Path hdmi-output-3 (HDMI / DisplayPort 4), direction=1, priority=56, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP, alsa_name='HDMI/DP,pcm=9 Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra3+input:analog-stereo - will not be able to open input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra3+input:iec958-stereo - will not be able to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround71-extra3
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 7.1 (HDMI 4) (hdmi-surround71-extra3)
D: [pulseaudio] alsa-util.c: Trying hdmi:1,3 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hdmi:1,3
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 5944 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround71-extra3 supported.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,3
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,3: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x564c875c3500, direction=1
D: [pulseaudio] alsa-mixer.c: Path hdmi-output-3 (HDMI / DisplayPort 4), direction=1, priority=56, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP, alsa_name='HDMI/DP,pcm=9 Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra3+input:analog-stereo - will not be able to open input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra3+input:iec958-stereo - will not be able to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-dts-surround-extra3
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI 4/DTS) (hdmi-dts-surround-extra3)
D: [pulseaudio] alsa-util.c: Trying dcahdmi:1,3 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,3
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,3: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-dts-surround-extra3
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra3+input:analog-stereo - will not be able to open output:hdmi-dts-surround-extra3
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra3+input:iec958-stereo - will not be able to open output:hdmi-dts-surround-extra3
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo-extra4
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI 5) (hdmi-stereo-extra4)
D: [pulseaudio] alsa-util.c: Trying hdmi:1,4 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hdmi:1,4
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 23777 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo-extra4 supported.
D: [pulseaudio] conf-parser.c: Parsing configuration file '/usr/share/pulseaudio/alsa-mixer/paths/hdmi-output-4.conf'
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
D: [pulseaudio] alsa-mixer.c: Probing path 'hdmi-output-4'
D: [pulseaudio] alsa-mixer.c: Probe of jack 'HDMI/DP,pcm=10 Jack' succeeded (found!)
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x564c875c34e0, direction=1
D: [pulseaudio] alsa-mixer.c: Path hdmi-output-4 (HDMI / DisplayPort 5), direction=1, priority=55, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP, alsa_name='HDMI/DP,pcm=10 Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra4+input:analog-stereo - will not be able to open input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra4+input:iec958-stereo - will not be able to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround-extra4
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI 5) (hdmi-surround-extra4)
D: [pulseaudio] alsa-util.c: Trying hdmi:1,4 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hdmi:1,4
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 7925 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround-extra4 supported.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x564c875c2300, direction=1
D: [pulseaudio] alsa-mixer.c: Path hdmi-output-4 (HDMI / DisplayPort 5), direction=1, priority=55, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP, alsa_name='HDMI/DP,pcm=10 Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra4+input:analog-stereo - will not be able to open input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra4+input:iec958-stereo - will not be able to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround71-extra4
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 7.1 (HDMI 5) (hdmi-surround71-extra4)
D: [pulseaudio] alsa-util.c: Trying hdmi:1,4 with SND_PCM_NO_AUTO_FORMAT ...
D: [pulseaudio] alsa-util.c: Managed to open hdmi:1,4
D: [pulseaudio] alsa-util.c: Maximum hw buffer size is 5944 ms
D: [pulseaudio] alsa-util.c: Set buffer size first (to 4408 samples), period size second (to 1102 samples).
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround71-extra4 supported.
I: [pulseaudio] (alsa-lib)control.c: Invalid CTL hdmi:1,4
I: [pulseaudio] alsa-util.c: Unable to attach to mixer hdmi:1,4: No such file or directory
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
D: [pulseaudio] alsa-mixer.c: Available mixer paths (after tidying):
D: [pulseaudio] alsa-mixer.c: Path Set 0x564c875c4e00, direction=1
D: [pulseaudio] alsa-mixer.c: Path hdmi-output-4 (HDMI / DisplayPort 5), direction=1, priority=55, probed=yes, supported=yes, has_mute=no, has_volume=no, has_dB=no, min_volume=0, max_volume=0, min_dB=inf, max_dB=-inf
D: [pulseaudio] alsa-mixer.c: Jack HDMI/DP, alsa_name='HDMI/DP,pcm=10 Jack', detection possible
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra4+input:analog-stereo - will not be able to open input:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra4+input:iec958-stereo - will not be able to open input:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-dts-surround-extra4
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI 5/DTS) (hdmi-dts-surround-extra4)
D: [pulseaudio] alsa-util.c: Trying dcahdmi:1,4 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,4
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,4: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-dts-surround-extra4
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra4+input:analog-stereo - will not be able to open output:hdmi-dts-surround-extra4
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra4+input:iec958-stereo - will not be able to open output:hdmi-dts-surround-extra4
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo-extra5
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI 6) (hdmi-stereo-extra5)
D: [pulseaudio] alsa-util.c: Trying hdmi:1,5 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,5: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-stereo-extra5
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra5+input:analog-stereo - will not be able to open output:hdmi-stereo-extra5
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra5+input:iec958-stereo - will not be able to open output:hdmi-stereo-extra5
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround-extra5
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI 6) (hdmi-surround-extra5)
D: [pulseaudio] alsa-util.c: Trying hdmi:1,5 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,5: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-surround-extra5
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra5+input:analog-stereo - will not be able to open output:hdmi-surround-extra5
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra5+input:iec958-stereo - will not be able to open output:hdmi-surround-extra5
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround71-extra5
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 7.1 (HDMI 6) (hdmi-surround71-extra5)
D: [pulseaudio] alsa-util.c: Trying hdmi:1,5 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,5: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-surround71-extra5
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra5+input:analog-stereo - will not be able to open output:hdmi-surround71-extra5
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra5+input:iec958-stereo - will not be able to open output:hdmi-surround71-extra5
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-dts-surround-extra5
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI 6/DTS) (hdmi-dts-surround-extra5)
D: [pulseaudio] alsa-util.c: Trying dcahdmi:1,5 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,5
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,5: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-dts-surround-extra5
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra5+input:analog-stereo - will not be able to open output:hdmi-dts-surround-extra5
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra5+input:iec958-stereo - will not be able to open output:hdmi-dts-surround-extra5
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo-extra6
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI 7) (hdmi-stereo-extra6)
D: [pulseaudio] alsa-util.c: Trying hdmi:1,6 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-stereo-extra6
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra6+input:analog-stereo - will not be able to open output:hdmi-stereo-extra6
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra6+input:iec958-stereo - will not be able to open output:hdmi-stereo-extra6
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround-extra6
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI 7) (hdmi-surround-extra6)
D: [pulseaudio] alsa-util.c: Trying hdmi:1,6 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-surround-extra6
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra6+input:analog-stereo - will not be able to open output:hdmi-surround-extra6
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra6+input:iec958-stereo - will not be able to open output:hdmi-surround-extra6
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround71-extra6
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 7.1 (HDMI 7) (hdmi-surround71-extra6)
D: [pulseaudio] alsa-util.c: Trying hdmi:1,6 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,6: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-surround71-extra6
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra6+input:analog-stereo - will not be able to open output:hdmi-surround71-extra6
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra6+input:iec958-stereo - will not be able to open output:hdmi-surround71-extra6
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-dts-surround-extra6
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI 7/DTS) (hdmi-dts-surround-extra6)
D: [pulseaudio] alsa-util.c: Trying dcahdmi:1,6 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,6
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,6: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-dts-surround-extra6
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra6+input:analog-stereo - will not be able to open output:hdmi-dts-surround-extra6
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra6+input:iec958-stereo - will not be able to open output:hdmi-dts-surround-extra6
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-stereo-extra7
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Stereo (HDMI 8) (hdmi-stereo-extra7)
D: [pulseaudio] alsa-util.c: Trying hdmi:1,7 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-stereo-extra7
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra7+input:analog-stereo - will not be able to open output:hdmi-stereo-extra7
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra7+input:iec958-stereo - will not be able to open output:hdmi-stereo-extra7
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround-extra7
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI 8) (hdmi-surround-extra7)
D: [pulseaudio] alsa-util.c: Trying hdmi:1,7 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-surround-extra7
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra7+input:analog-stereo - will not be able to open output:hdmi-surround-extra7
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra7+input:iec958-stereo - will not be able to open output:hdmi-surround-extra7
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-surround71-extra7
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 7.1 (HDMI 8) (hdmi-surround71-extra7)
D: [pulseaudio] alsa-util.c: Trying hdmi:1,7 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] alsa-util.c: Error opening PCM device hdmi:1,7: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-surround71-extra7
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra7+input:analog-stereo - will not be able to open output:hdmi-surround71-extra7
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra7+input:iec958-stereo - will not be able to open output:hdmi-surround71-extra7
D: [pulseaudio] alsa-mixer.c: Looking at profile output:hdmi-dts-surround-extra7
D: [pulseaudio] alsa-mixer.c: Checking for playback on Digital Surround 5.1 (HDMI 8/DTS) (hdmi-dts-surround-extra7)
D: [pulseaudio] alsa-util.c: Trying dcahdmi:1,7 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] (alsa-lib)pcm.c: Unknown PCM dcahdmi:1,7
I: [pulseaudio] alsa-util.c: Error opening PCM device dcahdmi:1,7: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open output:hdmi-dts-surround-extra7
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra7+input:analog-stereo - will not be able to open output:hdmi-dts-surround-extra7
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra7+input:iec958-stereo - will not be able to open output:hdmi-dts-surround-extra7
D: [pulseaudio] alsa-mixer.c: Looking at profile input:stereo-fallback
D: [pulseaudio] alsa-mixer.c: Checking for recording on Stereo (stereo-fallback)
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open input:stereo-fallback
D: [pulseaudio] alsa-mixer.c: Looking at profile input:mono-fallback
D: [pulseaudio] alsa-mixer.c: Checking for recording on Mono (mono-fallback)
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open input:mono-fallback
D: [pulseaudio] alsa-mixer.c: Looking at profile input:multichannel-input
D: [pulseaudio] alsa-mixer.c: Checking for recording on Multichannel (multichannel-input)
D: [pulseaudio] alsa-util.c: Trying hw:1 with SND_PCM_NO_AUTO_FORMAT ...
I: [pulseaudio] alsa-util.c: Error opening PCM device hw:1: No such file or directory
D: [pulseaudio] alsa-mixer.c: Caching failure to open input:multichannel-input
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:stereo-fallback - will not be able to open output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:mono-fallback - will not be able to open output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-stereo+input:multichannel-input - will not be able to open output:analog-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-21+input:stereo-fallback - will not be able to open output:analog-surround-21
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-21+input:mono-fallback - will not be able to open output:analog-surround-21
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-21+input:multichannel-input - will not be able to open output:analog-surround-21
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:stereo-fallback - will not be able to open output:analog-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:mono-fallback - will not be able to open output:analog-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-40+input:multichannel-input - will not be able to open output:analog-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:stereo-fallback - will not be able to open output:analog-surround-41
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:mono-fallback - will not be able to open output:analog-surround-41
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-41+input:multichannel-input - will not be able to open output:analog-surround-41
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:stereo-fallback - will not be able to open output:analog-surround-50
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:mono-fallback - will not be able to open output:analog-surround-50
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-50+input:multichannel-input - will not be able to open output:analog-surround-50
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:stereo-fallback - will not be able to open output:analog-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:mono-fallback - will not be able to open output:analog-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-51+input:multichannel-input - will not be able to open output:analog-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:stereo-fallback - will not be able to open output:analog-surround-71
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:mono-fallback - will not be able to open output:analog-surround-71
D: [pulseaudio] alsa-mixer.c: Skipping profile output:analog-surround-71+input:multichannel-input - will not be able to open output:analog-surround-71
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:stereo-fallback - will not be able to open output:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:mono-fallback - will not be able to open output:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-stereo+input:multichannel-input - will not be able to open output:iec958-stereo
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:stereo-fallback - will not be able to open output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:mono-fallback - will not be able to open output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-40+input:multichannel-input - will not be able to open output:iec958-ac3-surround-40
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:stereo-fallback - will not be able to open output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:mono-fallback - will not be able to open output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-ac3-surround-51+input:multichannel-input - will not be able to open output:iec958-ac3-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:stereo-fallback - will not be able to open output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:mono-fallback - will not be able to open output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:iec958-dts-surround-51+input:multichannel-input - will not be able to open output:iec958-dts-surround-51
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:stereo-fallback - will not be able to open input:stereo-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:mono-fallback - will not be able to open input:mono-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo+input:multichannel-input - will not be able to open input:multichannel-input
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround+input:stereo-fallback - will not be able to open input:stereo-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround+input:mono-fallback - will not be able to open input:mono-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround+input:multichannel-input - will not be able to open input:multichannel-input
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71+input:stereo-fallback - will not be able to open input:stereo-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71+input:mono-fallback - will not be able to open input:mono-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71+input:multichannel-input - will not be able to open input:multichannel-input
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround+input:stereo-fallback - will not be able to open output:hdmi-dts-surround
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround+input:mono-fallback - will not be able to open output:hdmi-dts-surround
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround+input:multichannel-input - will not be able to open output:hdmi-dts-surround
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra1+input:stereo-fallback - will not be able to open input:stereo-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra1+input:mono-fallback - will not be able to open input:mono-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra1+input:multichannel-input - will not be able to open input:multichannel-input
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra1+input:stereo-fallback - will not be able to open input:stereo-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra1+input:mono-fallback - will not be able to open input:mono-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra1+input:multichannel-input - will not be able to open input:multichannel-input
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra1+input:stereo-fallback - will not be able to open input:stereo-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra1+input:mono-fallback - will not be able to open input:mono-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra1+input:multichannel-input - will not be able to open input:multichannel-input
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra1+input:stereo-fallback - will not be able to open output:hdmi-dts-surround-extra1
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra1+input:mono-fallback - will not be able to open output:hdmi-dts-surround-extra1
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra1+input:multichannel-input - will not be able to open output:hdmi-dts-surround-extra1
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra2+input:stereo-fallback - will not be able to open input:stereo-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra2+input:mono-fallback - will not be able to open input:mono-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra2+input:multichannel-input - will not be able to open input:multichannel-input
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra2+input:stereo-fallback - will not be able to open input:stereo-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra2+input:mono-fallback - will not be able to open input:mono-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra2+input:multichannel-input - will not be able to open input:multichannel-input
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra2+input:stereo-fallback - will not be able to open input:stereo-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra2+input:mono-fallback - will not be able to open input:mono-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra2+input:multichannel-input - will not be able to open input:multichannel-input
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra2+input:stereo-fallback - will not be able to open output:hdmi-dts-surround-extra2
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra2+input:mono-fallback - will not be able to open output:hdmi-dts-surround-extra2
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra2+input:multichannel-input - will not be able to open output:hdmi-dts-surround-extra2
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra3+input:stereo-fallback - will not be able to open input:stereo-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra3+input:mono-fallback - will not be able to open input:mono-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra3+input:multichannel-input - will not be able to open input:multichannel-input
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra3+input:stereo-fallback - will not be able to open input:stereo-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra3+input:mono-fallback - will not be able to open input:mono-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra3+input:multichannel-input - will not be able to open input:multichannel-input
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra3+input:stereo-fallback - will not be able to open input:stereo-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra3+input:mono-fallback - will not be able to open input:mono-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra3+input:multichannel-input - will not be able to open input:multichannel-input
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra3+input:stereo-fallback - will not be able to open output:hdmi-dts-surround-extra3
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra3+input:mono-fallback - will not be able to open output:hdmi-dts-surround-extra3
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra3+input:multichannel-input - will not be able to open output:hdmi-dts-surround-extra3
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra4+input:stereo-fallback - will not be able to open input:stereo-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra4+input:mono-fallback - will not be able to open input:mono-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra4+input:multichannel-input - will not be able to open input:multichannel-input
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra4+input:stereo-fallback - will not be able to open input:stereo-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra4+input:mono-fallback - will not be able to open input:mono-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra4+input:multichannel-input - will not be able to open input:multichannel-input
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra4+input:stereo-fallback - will not be able to open input:stereo-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra4+input:mono-fallback - will not be able to open input:mono-fallback
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra4+input:multichannel-input - will not be able to open input:multichannel-input
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra4+input:stereo-fallback - will not be able to open output:hdmi-dts-surround-extra4
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra4+input:mono-fallback - will not be able to open output:hdmi-dts-surround-extra4
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra4+input:multichannel-input - will not be able to open output:hdmi-dts-surround-extra4
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra5+input:stereo-fallback - will not be able to open output:hdmi-stereo-extra5
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra5+input:mono-fallback - will not be able to open output:hdmi-stereo-extra5
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra5+input:multichannel-input - will not be able to open output:hdmi-stereo-extra5
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra5+input:stereo-fallback - will not be able to open output:hdmi-surround-extra5
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra5+input:mono-fallback - will not be able to open output:hdmi-surround-extra5
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra5+input:multichannel-input - will not be able to open output:hdmi-surround-extra5
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra5+input:stereo-fallback - will not be able to open output:hdmi-surround71-extra5
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra5+input:mono-fallback - will not be able to open output:hdmi-surround71-extra5
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra5+input:multichannel-input - will not be able to open output:hdmi-surround71-extra5
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra5+input:stereo-fallback - will not be able to open output:hdmi-dts-surround-extra5
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra5+input:mono-fallback - will not be able to open output:hdmi-dts-surround-extra5
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra5+input:multichannel-input - will not be able to open output:hdmi-dts-surround-extra5
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra6+input:stereo-fallback - will not be able to open output:hdmi-stereo-extra6
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra6+input:mono-fallback - will not be able to open output:hdmi-stereo-extra6
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra6+input:multichannel-input - will not be able to open output:hdmi-stereo-extra6
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra6+input:stereo-fallback - will not be able to open output:hdmi-surround-extra6
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra6+input:mono-fallback - will not be able to open output:hdmi-surround-extra6
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra6+input:multichannel-input - will not be able to open output:hdmi-surround-extra6
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra6+input:stereo-fallback - will not be able to open output:hdmi-surround71-extra6
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra6+input:mono-fallback - will not be able to open output:hdmi-surround71-extra6
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra6+input:multichannel-input - will not be able to open output:hdmi-surround71-extra6
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra6+input:stereo-fallback - will not be able to open output:hdmi-dts-surround-extra6
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra6+input:mono-fallback - will not be able to open output:hdmi-dts-surround-extra6
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra6+input:multichannel-input - will not be able to open output:hdmi-dts-surround-extra6
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra7+input:stereo-fallback - will not be able to open output:hdmi-stereo-extra7
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra7+input:mono-fallback - will not be able to open output:hdmi-stereo-extra7
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-stereo-extra7+input:multichannel-input - will not be able to open output:hdmi-stereo-extra7
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra7+input:stereo-fallback - will not be able to open output:hdmi-surround-extra7
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra7+input:mono-fallback - will not be able to open output:hdmi-surround-extra7
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround-extra7+input:multichannel-input - will not be able to open output:hdmi-surround-extra7
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra7+input:stereo-fallback - will not be able to open output:hdmi-surround71-extra7
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra7+input:mono-fallback - will not be able to open output:hdmi-surround71-extra7
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-surround71-extra7+input:multichannel-input - will not be able to open output:hdmi-surround71-extra7
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra7+input:stereo-fallback - will not be able to open output:hdmi-dts-surround-extra7
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra7+input:mono-fallback - will not be able to open output:hdmi-dts-surround-extra7
D: [pulseaudio] alsa-mixer.c: Skipping profile output:hdmi-dts-surround-extra7+input:multichannel-input - will not be able to open output:hdmi-dts-surround-extra7
D: [pulseaudio] flist.c: ../pulseaudio/src/pulsecore/idxset.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: ../pulseaudio/src/pulsecore/idxset.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: ../pulseaudio/src/pulsecore/idxset.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: ../pulseaudio/src/pulsecore/idxset.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: ../pulseaudio/src/pulsecore/idxset.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: ../pulseaudio/src/pulsecore/idxset.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: ../pulseaudio/src/pulsecore/idxset.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: ../pulseaudio/src/pulsecore/idxset.c: entries flist is full (don't worry)
D: [pulseaudio] flist.c: ../pulseaudio/src/pulsecore/idxset.c: entries flist is full (don't worry)
D: [pulseaudio] alsa-mixer.c: Profile set 0x564c87403310, auto_profiles=yes, probed=yes, n_mappings=15, n_profiles=15, n_decibel_fixes=0
D: [pulseaudio] alsa-mixer.c: Mapping hdmi-stereo (Digital Stereo (HDMI)), priority=59, channel_map=front-left,front-right, supported=yes, direction=1
D: [pulseaudio] alsa-mixer.c: Mapping hdmi-surround (Digital Surround 5.1 (HDMI)), priority=8, channel_map=front-left,front-right,rear-left,rear-right,front-center,lfe, supported=yes, direction=1
D: [pulseaudio] alsa-mixer.c: Mapping hdmi-surround71 (Digital Surround 7.1 (HDMI)), priority=8, channel_map=front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right, supported=yes, direction=1
D: [pulseaudio] alsa-mixer.c: Mapping hdmi-stereo-extra1 (Digital Stereo (HDMI 2)), priority=57, channel_map=front-left,front-right, supported=yes, direction=1
D: [pulseaudio] alsa-mixer.c: Mapping hdmi-surround-extra1 (Digital Surround 5.1 (HDMI 2)), priority=6, channel_map=front-left,front-right,rear-left,rear-right,front-center,lfe, supported=yes, direction=1
D: [pulseaudio] alsa-mixer.c: Mapping hdmi-surround71-extra1 (Digital Surround 7.1 (HDMI 2)), priority=6, channel_map=front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right, supported=yes, direction=1
D: [pulseaudio] alsa-mixer.c: Mapping hdmi-stereo-extra2 (Digital Stereo (HDMI 3)), priority=57, channel_map=front-left,front-right, supported=yes, direction=1
D: [pulseaudio] alsa-mixer.c: Mapping hdmi-surround-extra2 (Digital Surround 5.1 (HDMI 3)), priority=6, channel_map=front-left,front-right,rear-left,rear-right,front-center,lfe, supported=yes, direction=1
D: [pulseaudio] alsa-mixer.c: Mapping hdmi-surround71-extra2 (Digital Surround 7.1 (HDMI 3)), priority=6, channel_map=front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right, supported=yes, direction=1
D: [pulseaudio] alsa-mixer.c: Mapping hdmi-stereo-extra3 (Digital Stereo (HDMI 4)), priority=57, channel_map=front-left,front-right, supported=yes, direction=1
D: [pulseaudio] alsa-mixer.c: Mapping hdmi-surround-extra3 (Digital Surround 5.1 (HDMI 4)), priority=6, channel_map=front-left,front-right,rear-left,rear-right,front-center,lfe, supported=yes, direction=1
D: [pulseaudio] alsa-mixer.c: Mapping hdmi-surround71-extra3 (Digital Surround 7.1 (HDMI 4)), priority=6, channel_map=front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right, supported=yes, direction=1
D: [pulseaudio] alsa-mixer.c: Mapping hdmi-stereo-extra4 (Digital Stereo (HDMI 5)), priority=57, channel_map=front-left,front-right, supported=yes, direction=1
D: [pulseaudio] alsa-mixer.c: Mapping hdmi-surround-extra4 (Digital Surround 5.1 (HDMI 5)), priority=6, channel_map=front-left,front-right,rear-left,rear-right,front-center,lfe, supported=yes, direction=1
D: [pulseaudio] alsa-mixer.c: Mapping hdmi-surround71-extra4 (Digital Surround 7.1 (HDMI 5)), priority=6, channel_map=front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right, supported=yes, direction=1
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo (Digital Stereo (HDMI) Output), input=(null), output=hdmi-stereo priority=5900, supported=yes n_input_mappings=0, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Output hdmi-stereo
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround (Digital Surround 5.1 (HDMI) Output), input=(null), output=hdmi-surround priority=800, supported=yes n_input_mappings=0, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Output hdmi-surround
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround71 (Digital Surround 7.1 (HDMI) Output), input=(null), output=hdmi-surround71 priority=800, supported=yes n_input_mappings=0, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Output hdmi-surround71
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo-extra1 (Digital Stereo (HDMI 2) Output), input=(null), output=hdmi-stereo-extra1 priority=5700, supported=yes n_input_mappings=0, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Output hdmi-stereo-extra1
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround-extra1 (Digital Surround 5.1 (HDMI 2) Output), input=(null), output=hdmi-surround-extra1 priority=600, supported=yes n_input_mappings=0, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Output hdmi-surround-extra1
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround71-extra1 (Digital Surround 7.1 (HDMI 2) Output), input=(null), output=hdmi-surround71-extra1 priority=600, supported=yes n_input_mappings=0, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Output hdmi-surround71-extra1
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo-extra2 (Digital Stereo (HDMI 3) Output), input=(null), output=hdmi-stereo-extra2 priority=5700, supported=yes n_input_mappings=0, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Output hdmi-stereo-extra2
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround-extra2 (Digital Surround 5.1 (HDMI 3) Output), input=(null), output=hdmi-surround-extra2 priority=600, supported=yes n_input_mappings=0, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Output hdmi-surround-extra2
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround71-extra2 (Digital Surround 7.1 (HDMI 3) Output), input=(null), output=hdmi-surround71-extra2 priority=600, supported=yes n_input_mappings=0, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Output hdmi-surround71-extra2
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo-extra3 (Digital Stereo (HDMI 4) Output), input=(null), output=hdmi-stereo-extra3 priority=5700, supported=yes n_input_mappings=0, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Output hdmi-stereo-extra3
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround-extra3 (Digital Surround 5.1 (HDMI 4) Output), input=(null), output=hdmi-surround-extra3 priority=600, supported=yes n_input_mappings=0, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Output hdmi-surround-extra3
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround71-extra3 (Digital Surround 7.1 (HDMI 4) Output), input=(null), output=hdmi-surround71-extra3 priority=600, supported=yes n_input_mappings=0, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Output hdmi-surround71-extra3
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-stereo-extra4 (Digital Stereo (HDMI 5) Output), input=(null), output=hdmi-stereo-extra4 priority=5700, supported=yes n_input_mappings=0, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Output hdmi-stereo-extra4
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround-extra4 (Digital Surround 5.1 (HDMI 5) Output), input=(null), output=hdmi-surround-extra4 priority=600, supported=yes n_input_mappings=0, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Output hdmi-surround-extra4
D: [pulseaudio] alsa-mixer.c: Profile output:hdmi-surround71-extra4 (Digital Surround 7.1 (HDMI 5) Output), input=(null), output=hdmi-surround71-extra4 priority=600, supported=yes n_input_mappings=0, n_output_mappings=1
D: [pulseaudio] alsa-mixer.c: Output hdmi-surround71-extra4
I: [pulseaudio] module-card-restore.c: Restoring port latency offsets for card alsa_card.pci-0000_00_1f.3.
D: [pulseaudio] module-alsa-card.c: Found 5 jacks.
I: [pulseaudio] alsa-util.c: Successfully attached to mixer 'hw:1'
D: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=3 Jack' is now unplugged
D: [pulseaudio] device-port.c: Setting port hdmi-output-0 to status no
D: [pulseaudio] card.c: Setting card alsa_card.pci-0000_00_1f.3 profile output:hdmi-stereo to availability status no
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] card.c: Setting card alsa_card.pci-0000_00_1f.3 profile output:hdmi-surround to availability status no
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] card.c: Setting card alsa_card.pci-0000_00_1f.3 profile output:hdmi-surround71 to availability status no
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=7 Jack' is now unplugged
D: [pulseaudio] device-port.c: Setting port hdmi-output-1 to status no
D: [pulseaudio] card.c: Setting card alsa_card.pci-0000_00_1f.3 profile output:hdmi-stereo-extra1 to availability status no
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] card.c: Setting card alsa_card.pci-0000_00_1f.3 profile output:hdmi-surround-extra1 to availability status no
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] card.c: Setting card alsa_card.pci-0000_00_1f.3 profile output:hdmi-surround71-extra1 to availability status no
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=8 Jack' is now unplugged
D: [pulseaudio] device-port.c: Setting port hdmi-output-2 to status no
D: [pulseaudio] card.c: Setting card alsa_card.pci-0000_00_1f.3 profile output:hdmi-stereo-extra2 to availability status no
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] card.c: Setting card alsa_card.pci-0000_00_1f.3 profile output:hdmi-surround-extra2 to availability status no
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] card.c: Setting card alsa_card.pci-0000_00_1f.3 profile output:hdmi-surround71-extra2 to availability status no
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=9 Jack' is now unplugged
D: [pulseaudio] device-port.c: Setting port hdmi-output-3 to status no
D: [pulseaudio] card.c: Setting card alsa_card.pci-0000_00_1f.3 profile output:hdmi-stereo-extra3 to availability status no
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] card.c: Setting card alsa_card.pci-0000_00_1f.3 profile output:hdmi-surround-extra3 to availability status no
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] card.c: Setting card alsa_card.pci-0000_00_1f.3 profile output:hdmi-surround71-extra3 to availability status no
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] module-alsa-card.c: Jack 'HDMI/DP,pcm=10 Jack' is now unplugged
D: [pulseaudio] device-port.c: Setting port hdmi-output-4 to status no
D: [pulseaudio] card.c: Setting card alsa_card.pci-0000_00_1f.3 profile output:hdmi-stereo-extra4 to availability status no
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] card.c: Setting card alsa_card.pci-0000_00_1f.3 profile output:hdmi-surround-extra4 to availability status no
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] card.c: Setting card alsa_card.pci-0000_00_1f.3 profile output:hdmi-surround71-extra4 to availability status no
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
D: [pulseaudio] card.c: Looking for initial profile for card alsa_card.pci-0000_00_1f.3
D: [pulseaudio] card.c: output:hdmi-stereo availability no
D: [pulseaudio] card.c: output:hdmi-surround availability no
D: [pulseaudio] card.c: output:hdmi-surround71 availability no
D: [pulseaudio] card.c: output:hdmi-stereo-extra1 availability no
D: [pulseaudio] card.c: output:hdmi-surround-extra1 availability no
D: [pulseaudio] card.c: output:hdmi-surround71-extra1 availability no
D: [pulseaudio] card.c: output:hdmi-stereo-extra2 availability no
D: [pulseaudio] card.c: output:hdmi-surround-extra2 availability no
D: [pulseaudio] card.c: output:hdmi-surround71-extra2 availability no
D: [pulseaudio] card.c: output:hdmi-stereo-extra3 availability no
D: [pulseaudio] card.c: output:hdmi-surround-extra3 availability no
D: [pulseaudio] card.c: output:hdmi-surround71-extra3 availability no
D: [pulseaudio] card.c: output:hdmi-stereo-extra4 availability no
D: [pulseaudio] card.c: output:hdmi-surround-extra4 availability no
D: [pulseaudio] card.c: output:hdmi-surround71-extra4 availability no
D: [pulseaudio] card.c: off availability unknown
I: [pulseaudio] card.c: alsa_card.pci-0000_00_1f.3: active_profile: off
I: [pulseaudio] module-card-restore.c: Restoring profile 'off' for card alsa_card.pci-0000_00_1f.3.
I: [pulseaudio] card.c: Created 1 "alsa_card.pci-0000_00_1f.3"
D: [pulseaudio] alsa-util.c: ELD info empty (for device=3)
D: [pulseaudio] alsa-util.c: ELD info empty (for device=7)
D: [pulseaudio] alsa-util.c: ELD info empty (for device=8)
D: [pulseaudio] alsa-util.c: ELD info empty (for device=9)
D: [pulseaudio] alsa-util.c: ELD info empty (for device=10)
I: [pulseaudio] module.c: Loaded "module-alsa-card" (index: #7; argument: "device_id="1" name="pci-0000_00_1f.3" card_name="alsa_card.pci-0000_00_1f.3" namereg_fail=false tsched=yes fixed_latency_range=no ignore_dB=no deferred_volume=yes use_ucm=yes avoid_resampling=no card_properties="module-udev-detect.discovered=1"").
I: [pulseaudio] module-udev-detect.c: Card /devices/pci0000:00/0000:00:1f.3/sound/card1 (alsa_card.pci-0000_00_1f.3) module loaded.
I: [pulseaudio] module-udev-detect.c: Found 2 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-13.0/modules/module-jackdbus-detect.so': failure
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-13.0/modules/module-bluetooth-policy.so': failure
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-13.0/modules/module-bluetooth-discover.so': failure
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Memstats added for object /org/pulseaudio/core1/memstats
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card0/profile0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card0/profile1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card0/profile2
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card0/profile3
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card0/profile4
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Card added for object /org/pulseaudio/core1/card0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card1/profile0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card1/profile1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card1/profile2
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card1/profile3
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card1/profile4
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card1/profile5
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card1/profile6
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card1/profile7
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card1/profile8
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card1/profile9
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card1/profile10
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card1/profile11
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card1/profile12
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card1/profile13
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card1/profile14
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.CardProfile added for object /org/pulseaudio/core1/card1/profile15
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Card added for object /org/pulseaudio/core1/card1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.DevicePort added for object /org/pulseaudio/core1/sink0/port0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/sink0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Sink added for object /org/pulseaudio/core1/sink0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/source0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Source added for object /org/pulseaudio/core1/source0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/source1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Source added for object /org/pulseaudio/core1/source1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module2
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module3
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module4
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module5
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module6
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module7
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module8
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1 added for object /org/pulseaudio/core1
I: [pulseaudio] module.c: Loaded "module-dbus-protocol" (index: #8; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-13.0/modules/module-esound-protocol-unix.so': failure
I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #9; argument: "").
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module9
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-13.0/modules/module-gsettings.so': success
I: [pulseaudio] module.c: Loaded "module-gsettings" (index: #10; argument: "").
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module10
I: [pulseaudio] module-default-device-restore.c: Restoring default sink 'alsa_output.pci-0000_02_00.3.codec-output'.
I: [pulseaudio] core.c: configured_default_sink: (unset) -> alsa_output.pci-0000_02_00.3.codec-output
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
I: [pulseaudio] module-default-device-restore.c: Restoring default source 'bluez_source.4C_87_5D_57_6D_B1.headset_head_unit'.
I: [pulseaudio] core.c: configured_default_source: (unset) -> bluez_source.4C_87_5D_57_6D_B1.headset_head_unit
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #11; argument: "").
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module11
I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #12; argument: "").
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module12
I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #13; argument: "").
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module13
I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #14; argument: "").
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module14
D: [pulseaudio] module-suspend-on-idle.c: Sink alsa_output.pci-0000_02_00.3.codec-output becomes idle, timeout in 5 seconds.
D: [pulseaudio] module-suspend-on-idle.c: Source alsa_input.pci-0000_02_00.3.builtin-mic becomes idle, timeout in 5 seconds.
I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #15; argument: "").
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module15
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-13.0/modules/module-console-kit.so': success
I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #16; argument: "").
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module16
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-13.0/modules/module-systemd-login.so': success
I: [pulseaudio] client.c: Created 0 "Login Session 5"
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client0
D: [pulseaudio] module-systemd-login.c: Added new session 5
I: [pulseaudio] core.c: exit_idle_time: 20 -> 0
I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #17; argument: "").
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module17
I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #18; argument: "").
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module18
D: [pulseaudio] stream-interaction.c: Using role 'phone' as trigger role.
D: [pulseaudio] stream-interaction.c: Using roles 'music' and 'video' as cork roles.
I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #19; argument: "").
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module19
I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #20; argument: "").
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module20
I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #21; argument: "").
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module21
D: [pulseaudio] main.c: Got org.PulseAudio1!
D: [pulseaudio] main.c: Got org.pulseaudio.Server!
I: [pulseaudio] main.c: Daemon startup complete.
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_02_00.3.
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC1 is accessible: yes
D: [pulseaudio] module-udev-detect.c: Resuming all sinks and sources of card alsa_card.pci-0000_00_1f.3.
[1]    18077 killed     pulseaudio -vvvv

systemctl --user status pulseaudio.socket

● pulseaudio.socket - Sound System
     Loaded: loaded (/usr/lib/systemd/user/pulseaudio.socket; enabled; vendor preset: enabled)
     Active: failed (Result: service-start-limit-hit) since Wed 2020-02-26 19:12:37 CET; 13min ago
   Triggers: ● pulseaudio.service
     Listen: /run/user/1000/pulse/native (Stream)

Feb 26 19:12:17 jacobmacbookpro systemd[1270]: Listening on Sound System.
Feb 26 19:12:37 jacobmacbookpro systemd[1270]: pulseaudio.socket: Failed with result 'service-start-limit-hit'.

systemctl --user status pulseaudio.service

● pulseaudio.service - Sound Service
     Loaded: loaded (/usr/lib/systemd/user/pulseaudio.service; enabled; vendor preset: enabled)
     Active: failed (Result: signal) since Wed 2020-02-26 19:12:37 CET; 13min ago
TriggeredBy: ● pulseaudio.socket
    Process: 2124 ExecStart=/usr/bin/pulseaudio --daemonize=no (code=killed, signal=KILL)
   Main PID: 2124 (code=killed, signal=KILL)

Feb 26 19:12:36 jacobmacbookpro systemd[1270]: pulseaudio.service: Failed with result 'signal'.
Feb 26 19:12:37 jacobmacbookpro systemd[1270]: pulseaudio.service: Scheduled restart job, restart counter is at >
Feb 26 19:12:37 jacobmacbookpro systemd[1270]: Stopped Sound Service.
Feb 26 19:12:37 jacobmacbookpro systemd[1270]: pulseaudio.service: Start request repeated too quickly.
Feb 26 19:12:37 jacobmacbookpro systemd[1270]: pulseaudio.service: Failed with result 'signal'.
Feb 26 19:12:37 jacobmacbookpro systemd[1270]: Failed to start Sound Service.

Freezes and crashes on MacBookPro15,2

I have a MacBookPro15,2 (a.k.a. A1989) and tried to build and load this module on a Debian Live system with the Linux kernel 5.8 from the official Debian backports. The module builds without any problem but some seconds after loading the module via insmod, the system freezes and a while later just reboots. Attached is the output of "dmesg -w" I captured via ssh from another machine. I hope it helps debugging and fixing the issue.

Another thing I noticed was that after rebooting into macOS, it showed an error message that my computer was rebooted because of a problem. The headline was "Fehlerbericht für bridgeOS" (German for "error report for bridgeOS").

Please tell me if I there is something else I can do to help fixing this issue.
Thank you very much for your work on this driver.

dmesg_output_bce.txt

Mouse right click or taps not working

HI,
Thanks for the great help with the modules. Keyboard and touchpad works just fine with MBP15,4. However, the right click and taps on the touchpad is a problem. Please let me know if something can be done.

Requirements?

I came here looking for a way to get my Linux Mint install working with my new Macbook Pro 2018. Compiling failed, my guess is that the default "4.15.0-70-generic" kernel is too old. What kernel version is needed for this?

Lack of locking

Hi !

I looked at your driver and I think quite a bit of your stability problems could relate to the absence of meaningful locking in there :)

You plan a dance with atomics here or there but that's really not going to fly. I reckon you should have a per-queue spinlocks and for general non-interrupt housekeeping, use a mutex. Esp. with USB, you will be called at random times including softirq, etc...

One interesting question is how often do you need to use the mailbox. It might be worthwhile considering making it a request queue with interrupt completions, up to you...

License?

To help as many operating systems add support for the T2 chipset as quickly as possible, could you offer this code as MIT licensed or BSD licensed?

Loading the module in initramfs for cryptsetup use

Hi,

I am trying to use LUKS encryption on my MacBook Pro (16,2). Cryptsetup will show the password prompt in initramfs before boot to decrypt the root filesystem first.

However, I was unable to type anything using the internal keyboard as the Apple BCE, HID kernel modules are not loaded yet. I can only enter the encryption key with an external keyboard connected.

I am wondering is there a (correct) way to copy and load those modules into initramfs.

Macbook Pro (15-inch 2018) - bce module insmod causes OS freezes

Kernel 5.2.11-1-default #1 SMP
OS: OpenSUSE Tumbleweed

Patched module brcmfmac alone works OK - wifi has stable link with AP (no bce.ko loaded - so no internal keyboard/touchpad works) - OS is stable.
Bce.ko insmod alone - keyboard and touchpad works ok (no wifi as brcmfmac is not loaded) - OS is stable.

When brcmfmac is loaded and later bce.ko is loaded (with insmod) after several seconds OS freezes (the same in oposite direction - bce is loaded first, and then brcmfmac is loaded)

Dmesg main problems area watchdog: BUG: soft lockup - CPU#11 stuck for 22s! :

`
[ 377.948036] BUG: workqueue lockup - pool cpus=8 node=0 flags=0x0 nice=0 stuck for 51s!

...

[ 645.866897] CPU: 3 PID: 3639 Comm: pulseaudio Tainted: G OEL 5.2.11-1-default #1 openSUSE Tumbleweed (unreleased)
[ 645.866898] Hardware name: Apple Inc. MacBookPro15,1/Mac-, BIOS 220.270.99.0.0 (iBridge: 16.16.6571.0.0,0) 07/11/2019
[ 645.866902] RIP: 0010:smp_call_function_many+0x208/0x270
[ 645.866904] Code: e8 3d 4a 78 00 3b 05 bb 28 23 01 89 c7 0f 83 7d fe ff ff 48 63 c7 48 8b 0b 48 03 0c c5 c0 aa f7 a4 8b 41 18 a8 01 74 0a f3 90 <8b> 51 18 83 e2 01 75 f6 eb c9 48 c7 c2 80 61 16 a5 4c 89 fe 89 df
[ 645.866906] RSP: 0018:ffffae5002ef7c08 EFLAGS: 00000202 ORIG_RAX: ffffffffffffff13
[ 645.866908] RAX: 0000000000000003 RBX: ffff9ed3ae8ee640 RCX: ffff9ed3aea344e0
[ 645.866909] RDX: 0000000000000001 RSI: 0000000000000000 RDI: 0000000000000008
[ 645.866911] RBP: ffffffffa3e7eaf0 R08: ffff9ed3ae8ee648 R09: 0000000000000000
[ 645.866912] R10: 0000000000000007 R11: 0000000000000008 R12: 0000000000000000
[ 645.866913] R13: ffff9ed3ae8ee648 R14: 0000000000000001 R15: 0000000000000200
[ 645.866914] FS: 00007f09259ac840(0000) GS:ffff9ed3ae8c0000(0000) knlGS:0000000000000000
[ 645.866916] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 645.866917] CR2: 00007f0921654b03 CR3: 0000000438154006 CR4: 00000000003606e0
[ 645.866918] Call Trace:
[ 645.866922] ? load_new_mm_cr3+0xe0/0xe0
[ 645.866923] on_each_cpu+0x28/0x80
[ 645.866926] __purge_vmap_area_lazy+0x65/0x130
[ 645.866928] _vm_unmap_aliases+0xf1/0x130
[ 645.866930] change_page_attr_set_clr+0xaa/0x1c0
[ 645.866933] set_memory_ro+0x26/0x30
[ 645.866935] bpf_int_jit_compile+0x255/0x30d
[ 645.866938] bpf_prog_select_runtime+0xcd/0x150
[ 645.866940] bpf_prepare_filter+0x42b/0x4b0
[ 645.866942] sk_attach_filter+0x14/0x50
[ 645.866944] ? _copy_from_user+0x37/0x60
[ 645.866947] sock_setsockopt+0x6c5/0xcc0
[ 645.866949] ? aa_sk_perm+0x3e/0x160
[ 645.866950] __sys_setsockopt+0xbc/0xd0
[ 645.866952] __x64_sys_setsockopt+0x21/0x30
[ 645.866954] do_syscall_64+0x6e/0x1e0
[ 645.866956] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[ 645.866958] RIP: 0033:0x7f092621bcea
[ 645.866960] Code: ff ff ff c3 48 8b 15 ad e1 0b 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 49 89 ca b8 36 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 7e e1 0b 00 f7 d8 64 89 01 48
[ 645.866963] RSP: 002b:00007ffcd8f5a578 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
[ 645.866965] RAX: ffffffffffffffda RBX: 00007ffcd8f5a5e0 RCX: 00007f092621bcea
[ 645.866967] RDX: 000000000000001a RSI: 0000000000000001 RDI: 000000000000000e
[ 645.866969] RBP: 0000000000000006 R08: 0000000000000010 R09: 00000000ffffffff
[ 645.866970] R10: 00007ffcd8f5a5d0 R11: 0000000000000246 R12: 0000000000000008
[ 645.866971] R13: 00007ffcd8f5a5b0 R14: 00007ffcd8f5a618 R15: 00007ffcd8f5a610
[ 645.867005] watchdog: BUG: soft lockup - CPU#11 stuck for 22s! [chromium:3642]
`

mac15_lspci.txt
mac15_dmidecode.txt
bce_insmod_after_brcmfmac_is_loaded_crash.txt

Recommend Projects

React

A declarative, efficient, and flexible JavaScript library for building user interfaces.
Vue.js

🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
Typescript

TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
TensorFlow

An Open Source Machine Learning Framework for Everyone
Django

The Web framework for perfectionists with deadlines.
Laravel

A PHP framework for web artisans
D3

Bring data to life with SVG, Canvas and HTML. 📊📈🎉

Recommend Topics

javascript

JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
web

Some thing interesting about web. New door for the world.
server

A server is a program made to process requests and deliver data to clients.
Machine learning

Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Visualization

Some thing interesting about visualization, use data art
Game

Some thing interesting about game, make everyone happy.

Recommend Org

Facebook

We are working to build community through open source technology. NB: members must have two-factor auth.
Microsoft

Open source projects and samples from Microsoft.
Google

Google ❤️ Open Source for everyone.
Alibaba

Alibaba Open Source for everyone
D3

Data-Driven Documents codes.
Tencent

China tencent open source team.