This is TeeBotMax printed parts (all STL files).

Designed by Emmanuel Adetutu (Teetopsy).

TeeBotMax is a RepRap printer. The design is highly inspired by the fantastic Foldarap and Prusa I3 3D printers. The Idea was to design and develop a 3D printer which is simple to build, easy to move around and travel with, built with simple materials and equally strong and precise.

Blog, Photo, Info: http://tutuemma.wordpress.com/3d-stuffs/teebotmax/

Build Video Part 1: https://www.youtube.com/watch?v=Mo2O-83_jfQ

Photos: https://plus.google.com/106611509110430377536/photos

Z ROD HOLDER. 8mm hole in the "Z ROD HOLDER" was missing in the left holder, also the mounting hole was 3mm instaed of 5mm, you can drill both holes out with a 8mm and 5mm drill if you already printed.... new file uploaded.

Ramps casing. STL file uploaded, the casing sit perfectly on a 112mm power supply only.

Extruder Stepper motor size. Large stepper motors with lenght bigger than 38mm, do not sit perfect on the extruder mount. You will need to print the uploaded attachment and use longer bolts if using the teestruder.

Missing Illustration on how to mount the limit switch and Smart Z level have been added to the documentation. I also added a new Extruder mount for larger stepper motors elimination the use of the extension above.

Software folder contains pre-config Marlin should work 100% if you have the complete kit, if you build the printer from your own part all that might require is calibrations for the steps/mm.

Many thanks to builders and contributors who havae been giving the feedback